Extreme Networks ExtremeWare XOS Command Operating manual

Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, California 95051
[phone]
http://www.extremenetworks.com
ExtremeWare XOS Command
Reference Guide
Software Version 11.0
Published: September 2004
Part number: 100151-00 rev 04

2
Alpine, Altitude, BlackDiamond, EPICenter, Ethernet Everywhere, Extreme Ethernet Everywhere, Extreme Networks,
Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeWorks, GlobalPx Content Director, the Go Purple Extreme
Solution Partners Logo, ServiceWatch, Summit, the Summit7i Logo, and the Color Purple, among others, are trademarks
or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and other countries. Other
names and marks may be the property of their respective owners.
© 2004 Extreme Networks, Inc. All Rights Reserved.
Specifications are subject to change without notice.
The ExtremeWare XOS operating system is based, in part, on the Linux operating system. The machine-readable copy of
the corresponding source code is available for the cost of distribution. Please direct requests to Extreme Networks for
more information at the following address:
Software Licensing Department
3585 Monroe Street
Santa Clara CA 95051
NetWare and Novell are registered trademarks of Novell, Inc. Merit is a registered trademark of Merit Network, Inc.
Solaris is a trademark of Sun Microsystems, Inc. F5, BIG/ip, and 3DNS are registered trademarks of F5 Networks, Inc.
see/IT is a trademark of F5 Networks, Inc.
sFlow® is a registered trademark of InMon Corporation.
All other registered trademarks, trademarks and service marks are property of their respective owners.
1 2 3 4 5 6 7 8 9
Authors: Hugh Bussell, Megan Mahar, Peggy Murphy
Production: Megan Mahar

ExtremeWare XOS 11.0 Command Reference Guide 3
Contents
Preface
Chapter 1 Command Reference Overview
Chapter 2 Commands for Accessing the Switch
clear session 36
configure account 37
configure banner 38
configure cli max-sessions 39
configure cli max-failed-logins 40
configure dns-client add 41
configure dns-client default-domain 42
configure dns-client delete 43
configure failsafe-account 44
configure idletimeout 46
configure time 47
configure timezone 48
create account 52
delete account 54
disable cli space-completion 55
disable clipaging 56
disable idletimeout 57
enable cli space-completion 58
enable clipaging 59
enable idletimeout 60

4ExtremeWare XOS 11.0 Command Reference Guide
Contents
history 61
ping 62
reboot 64
show account 65
show banner 66
show dns-client 67
show switch 68
traceroute 70
Chapter 3 Commands for Managing the Switch
configure node priority 73
configure snmp add community 74
configure snmp add trapreceiver 75
configure snmp delete community 77
configure snmp delete trapreceiver 78
configure snmp sysContact 79
configure snmp sysLocation 80
configure snmp sysName 81
configure snmpv3 add access 82
configure snmpv3 add community 84
configure snmpv3 add filter 86
configure snmpv3 add filter-profile 88
configure snmpv3 add group user 89
configure snmpv3 add mib-view 91
configure snmpv3 add notify 93
configure snmpv3 add target-addr 94
configure snmpv3 add target-params 96
configure snmpv3 add user 98
configure snmpv3 add user clone-from 100
configure snmpv3 delete access 101
configure snmpv3 delete community 103
configure snmpv3 delete filter 104
configure snmpv3 delete filter-profile 105
configure snmpv3 delete group user 106

ExtremeWare XOS 11.0 Command Reference Guide 5
Contents
configure snmpv3 delete mib-view 108
configure snmpv3 delete notify 109
configure snmpv3 delete target-addr 110
configure snmpv3 delete target-params 111
configure snmpv3 delete user 112
configure snmpv3 engine-boots 113
configure snmpv3 engine-id 114
configure sntp-client 115
configure sntp-client update-interval 116
configure telnet port 117
configure telnet vr 118
disable dhcp vlan 119
disable snmp access 120
disable sntp-client 121
disable telnet 122
disable watchdog 123
enable dhcp vlan 124
enable snmp access 125
enable sntp-client 126
enable telnet 127
enable watchdog 128
exit 129
logout 130
quit 131
show dhcp-client state 132
show checkpoint-data 133
show management 135
show node 137
show odometers 139
show power 141
show power budget 143
show power controller 145
show session 147
show snmpv3 access 149

6ExtremeWare XOS 11.0 Command Reference Guide
Contents
show snmpv3 context 151
show snmpv3 counters 152
show snmpv3 engine-info 154
show snmpv3 filter 155
show snmpv3 filter-profile 156
show snmpv3 group 157
show snmpv3 mib-view 160
show snmpv3 notify 162
show snmpv3 target-addr 163
show snmpv3 extreme-target-addr-ext 164
show snmpv3 target-params 165
show snmpv3 user 166
show sntp-client 168
start process 169
telnet 170
terminate process 172
tftp 174
Chapter 4 Commands for Configuring Slots and Ports on a Switch
clear counters edp 179
clear slot 180
configure edp advertisement-interval 181
configure ip-mtu vlan 182
configure jumbo-frame size 183
configure mirroring add 184
configure mirroring delete 186
configure ports auto off 187
configure ports auto on 189
configure ports display-string 190
configure sharing address-based 191
configure slot 193
configure sharing add ports 194
configure sharing delete ports 195
disable edp ports 196

ExtremeWare XOS 11.0 Command Reference Guide 7
Contents
disable jumbo-frame ports 197
disable learning port 198
disable mirroring 199
disable port 200
disable sharing 201
disable slot 202
enable edp ports 203
enable jumbo-frame ports 204
enable learning port 205
enable mirroring to port 206
enable port 208
enable sharing grouping 209
enable slot 211
restart ports 212
run msm-failover 213
show edp 214
show mirroring 216
show ports collisions 217
show ports configuration 218
show ports information 220
show ports packet 223
show ports sharing 225
show slot 226
unconfigure ports display string 229
unconfigure slot 230
Chapter 5 VLAN Commands
configure protocol add 232
configure protocol delete 233
configure vlan add ports 234
configure vlan delete ports 236
configure vlan ipaddress 237
configure vlan name 238
configure vlan protocol 239

8ExtremeWare XOS 11.0 Command Reference Guide
Contents
configure vlan tag 240
configure vman add ports 241
configure vman delete ports 243
configure vman ethertype 244
configure vman tag 245
create protocol 246
create vlan 247
create vman 249
delete protocol 251
delete vlan 252
delete vman 253
disable loopback-mode vlan 254
enable loopback-mode vlan 255
show protocol 256
show vlan 257
show vman 259
unconfigure vlan ipaddress 261
Chapter 6 Commands for Virtual Routers
create virtual-router 264
configure vr add protocol 265
configure vr add ports 266
configure vr delete protocol 267
configure vr delete ports 268
delete virtual-router 269
show virtual-router 270
virtual-router 272
Chapter 7 FDB Commands
clear fdb 274
configure fdb agingtime 275
create fdbentry vlan ports 276
delete fdbentry 277
show fdb 278

ExtremeWare XOS 11.0 Command Reference Guide 9
Contents
Chapter 8 QoS Commands
configure diffserv examination code-point 283
configure diffserv replacement 284
configure dot1p type 286
configure ports qosprofile 287
configure qosprofile ingress ports 288
configure qosprofile ports 290
configure vlan qosprofile 292
disable diffserv examination port 293
disable diffserv replacement port 294
disable dot1p replacement ports 295
enable diffserv examination port 296
enable diffserv replacement ports 297
enable dot1p replacement ports 298
show diffserv 299
show dot1p 301
show ports qosmonitor 302
show qosprofile ports 304
unconfigure diffserv 306
unconfigure qosprofile ports 307
Chapter 9 Commands for Status Monitoring and Statistics
clear counters 311
clear log 312
clear log counters 313
configure log filter events 314
configure log filter events match 317
configure log target filter 320
configure log target format 322
configure log target match 326
configure log target severity 328
configure sflow agent ipaddress 330
configure sflow collector ipaddress 331
configure sflow max-cpu-sample-limit 332

10 ExtremeWare XOS 11.0 Command Reference Guide
Contents
configure sflow poll-interval 333
configure sflow ports sample-rate 334
configure sflow sample-rate 335
configure sys-health-check interval 336
configure sys-recovery-level 338
configure syslog add 339
configure syslog delete 341
create log filter 342
delete log filter 343
disable cli-config-logging 344
disable log debug-mode 345
disable log target 346
disable sflow 348
disable sflow ports 349
disable sys-health-check 350
disable syslog 351
enable cli-config-logging 352
enable log debug-mode 353
enable log target 354
enable sflow 356
enable sflow ports 357
enable sys-health-check 358
enable syslog 359
show fans 360
show heartbeat process 362
show log 364
show log components 368
show log configuration 371
show log configuration filter 373
show log configuration target 375
show log counters 377
show log events 379
show memory 381
show ports rxerrors 383