Extron electronics MSW 4SV rs User manual

Specifications — MSW 4 rs Series Switchers
Video — MSW 4V rs, MSW 4SV rs
Gain ............................................... Unity
Bandwidth
MSW 4V ............................ 300 MHz (-3 dB)
MSW 4SV .......................... 250 MHz (-3 dB)
Crosstalk ....................................... <-60 dB @ 3.58 MHz
Switching speed ........................... 20 ms (max.)
Video — MSW 4V SDI rs
Resolution ..................................... 8 or 10 bits, automatic
Operation standards ................... 143 Mb/s (4fsc NTSC)
177 Mb/s (4fsc PAL)
270 Mb/s (4:2:2) component video
360 Mb/s (4:2:2) widescreen, autoselect
Equalization and reclocking ...... Automatic for up to -30 dB of cable loss
Automatic data rate clock .......... Yes
Video input
Number/signal type
MSW 4V rs ........................ 4 composite video
MSW 4SV rs ...................... 4 S-video
MSW 4V SDI rs ................ 4 serial digital component video
Connectors
MSW 4V rs, MSW 4V SDI rs 4 female BNC
MSW 4SV rs ...................... 4 female 4-pin mini DIN
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
0.8 Vp-p for SDI
Minimum/maximum levels (MSW 4V rs, MSW 4SV rs)
0.4 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss
MSW 4SV rs ...................... <-25 dB, DC @ 10 MHz
Other models .................... <-40 dB, DC @ 10 MHz
DC offset (max. allowable) ......... 5.0 V
Input coupling
MSW 4V rs, MSW 4SV rs DC
MSW 4V SDI rs ................ AC
Video output
Number/signal type
MSW 4V rs ........................ 2 composite video
MSW 4SV rs ...................... 1 S-video, 1 composite video
MSW 4V SDI rs ................ 2 reclocked SMPTE-259 serial digital component video
Connectors
MSW 4V rs, MSW 4V SDI rs 2 BNC female
MSW 4SV rs ...................... 1 BNC female, (1) 4-pin mini DIN female
Nominal level ............................... 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
0.8 Vp-p for SDI
Minimum/maximum levels (MSW 4V rs, MSW 4SV rs)
0.4 V to 2.0 Vp-p
Impedance .................................... 75 ohms
1-2 MSW 4V rs, MSW 4SV rs, MSW 4V SDI rs • Specifications

Return loss
MSW 4V/4SV rs............... <-30 dB @ 5 MHz
MSW 4V SDI rs ................ <-25 dB @ 5 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Switching type (MSW 4V rs/4SV rs)
Vertical interval
Jitter (MSW 4V SDI rs) ............... <2 µs
Rise/fall time (20-80%, MSW 4V SDI rs)
700 ps ±100 ps
Re-clocking (MSW 4V SDI rs) ... Automatic, bypass mode for nonstandard rates
Sync
Standards
MSW 4V rs, MSW 4SV rs NTSC 3.58, NTSC 4.43, PAL, SECAM
MSW 4V SDI rs ............... SMPTE-259M
Control/remote — switcher
Serial control port ........................ 1 RS-232, 3.5 mm captive screw connector, 5 pole
Baud rate and protocol ............... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations 1 = TX, 2 = RX, 3 = GND
Contact closure ............................ (1) 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations 1 = input 1, 2 = input 2, 3 = input 3, 4 = input 4, 5 = GND
Program control ........................... Extron’s Universal Switcher program for Windows®
Extron’s Simple Instruction Set (SIS™)
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, regulated
Power input requirements
MSW 4V rs, MSW 4SV rs 12 VDC, 0.2 A
MSW 4V SDI rs ................ 12 VDC, 0.4 A
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount ................................... Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 or 60-604-01; or 6" deep
rack shelf, part #60-190-10 or #60-604-10; or VersaTools®3" deep rack shelf, part
#60-190-20 or 60-604-20; also under-furniture mountable with optional brackets
#70-212-01
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 6.5 cm D
(Depth excludes connectors.)
Product weight ............................. 0.6 lbs (0.3 kg)
Shipping weight ........................... 3 lbs (2 kg)
Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
(7.52-121206-D3)
MSW 4V rs, MSW 4SV rs, MSW 4V SDI rs • Specifications 1-3