Eyevision EV-TRUWL7-KP22 User manual

EV-TRUWL7-KP22
TruWireless Intercom System with
Built-in Halow WiFi Bridge

Description
Description ------------------------------------------------------------------------------------------ 3
Contents --------------------------------------------------------------------------------------------- 3
Parameters (Indoor Unit) ------------------------------------------------------------------------ 3
Parameters (Video Intercom) ------------------------------------------------------------------- 3
Setup
Monitor and Intercom Device Setup ------------------------------------------------- 4
Monitor and Intercom Device Pairing ------------------------------------------------ 4
Connecting to a Smartphone Device ------------------------------------------------- 4
Tuya Smart APP ---------------------------------------------------------------------------- 5
Indoor Monitor Operation Instructions
Home Page ---------------------------------------------------------------------------------- 6
Records --------------------------------------------------------------------------------------- 6
Monitor --------------------------------------------------------------------------------------- 6
Mobile Access ------------------------------------------------------------------------------- 7
User Settings -------------------------------------------------------------------------------- 8
System Settings ----------------------------------------------------------------------------- 8
Ring -------------------------------------------------------------------------------------------- 8
Monitor Door 1 ----------------------------------------------------------------------------- 8
Unlock ---------------------------------------------------------------------------------------- 8
Video Intercom Programming
Modes ---------------------------------------------------------------------------------------- 9
Enter Administrator Operation Mode ------------------------------------------------ 9
Enter Unlocked Mode -------------------------------------------------------------------- 9
Default Settings ---------------------------------------------------------------------------- 9
Reset ------------------------------------------------------------------------------------------ 9
Modify Administrator Code ------------------------------------------------------------- 10
Public Unlock Code ----------------------------------------------------------------------- 10
Modify Public Unlock Code ------------------------------------------------------------- 10
Delete Public Unlock Code -------------------------------------------------------------- 10
Setup Unlock Mode ---------------------------------------------------------------------- 10
Modify the Unlock Time of Relay ----------------------------------------------------- 11
Safety Mode Setup ----------------------------------------------------------------------- 11
Add Master Card -------------------------------------------------------------------------- 11
Switch Language -------------------------------------------------------------------------- 11
Switch Wired/Wireless Mode --------------------------------------------------------- 11
Add User Card ----------------------------------------------------------------------------- 12
Delete User Card -------------------------------------------------------------------------- 12
Delete All User Cards -------------------------------------------------------------------- 12
User Operations -------------------------------------------------------------------------- 13
Table of Contents

Description
Contents
EV-TRUWL7-KP22 is a True Wireless Intercom System with a built-in WiFi Bridge. This system contains two
main devices; the indoor monitoring screen in addition to the smart video intercom, these devices are
connected through WiFi antennas. The indoor monitoring screen is a 7 inch HD touch screen that allows for
remote monitoring of the smart video intercom and its connected locks. It is also compatible with SD cards
which can be used to store recorded videos and photos taken from the smart video intercom. With this
system a gate or electric lock can be unlocked directly from the smart video intercom keypad or RFID tag area,
from the indoor monitoring device or from a smart phone connected through the Tuya Smart App.
Video intercom device
Indoor monitor unit
Antenna x 2
Extension cable for antenna
Power cable (intercom)
Power cable (indoor unit)
Cable for intercom extensions
Cable for custom intercom power supply
Swipe tag x 2
Assorted screws and spacers
Mount for video intercom
Bracket support
Parameters (Indoor Unit)
Display 7” TFT LCD
Resolution 1024*600
Vibration Bell>=70dB
Power DC
Current <350mA
Working Temperature -20 C ~ +70 C
Max Power Consumption <5W
Installation Surface Mounted
Parameters (Video Intercom)
View Angle 7” TFT LCD
Resolution 1024*600
Night Vision Bell>=70dB
Voltage DC
Standby Current <350mA
Working Temperature -20 C ~ +70 C
Relative Humidity <5W
3

Monitor and Intercom Device Pairing
Setup
1. Screw an antenna onto the back of the video intercom device.
2. Screw the remaining antenna onto the back of the indoor monitoring device.
3. If required, use the antenna extension cord to reduce the distance or number of obstructions between the two antennas.
4. Connect the power supply to the video intercom device and wait for it to turn on.
5. Connect the power supply to the indoor monitoring device and wait for it to turn on.
Monitor and Intercom Device Setup
Once the devices have been setup, the next step is to pair the video intercom to the indoor monitor.
1. Dial the slider on the back of the video intercom to the right as seen in the image.
2. Press and hold the button on the back of the video intercom as seen in the image.
3. While still pressing the button on the back of the video intercom press and hold the Link button on the back
of the indoor monitor. A thin rod will be needed to complete this step.
4. Once the light to the right of the Link button flashes quickly, the devices have successfully been paired and
the buttons can be released.
Press and hold
this button
while pairing
Slide this
button to the
right
Press and hold
this button
while pairing
This light flashes quickly
when pairing is successful
Description
Connecting to Wifi on the indoor monitor:
1. On the main page click on Mobile Access  Cloud Intercom  Wifi Connection.
2. Click on the Wifi network and then press connect.
3. Input the password and press enter.
4. The device will now be connected to Wifi.
Display the QR code on the indoor monitor:
1. On the main page click on Mobile Access  Cloud Intercom  QRCode.
2. The QR code will appear on the display.
3. This QR code is used in later steps.
Connecting to the Tuya Smart App:
1. Download to Tuya Smart application from the Appstore or Google Play Store.
2. Register an account with the correct country and area.
3. Login to the app after registration.
4. Continue to the next page for further instructions.
Connecting to a Smartphone Device
4

Connecting to a Smartphone Device
12
Press Add Device:Press the QR code button
in the top right corner:
Scan the QR code on
the indoor monitor:
3
Wait up to 2 minute for
the device to connect:
4
Tuya Smart APP
1 2
3
4 5
6
7
8
9
(1). Hang off (Back): During a call or monitoring process,
click this key to exit the current interface.
(2). Settings: Button to access the settings of the device.
(3). Resolution: Toggle between HD and SD.
(4). Loudspeaker: This button will toggle between
muting and unmuting the audio from the security device.
(5). Fullscreen: Display the image in full screen.
(6). Screenshot: Capture a screenshot of the video
output and store it in the album.
(7). Microphone: This button will play the audio
captured from the mobile device through the speakers of
the security device.
(8). Record: Video recording from intercom
(9). Unlock: Unlock the security device.
5

Indoor Monitor Operation Instructions
Home Page
Overview of the main home page with screenshots
Records
Monitor
Mobile Access
User Settings
System Settings
Ring
Monitor Door 1
Unlock
Records
Photo Record
Storage cells, motion detections, snapshot pictures will all be accessible in the photo record page. The text
for the photo that is currently selected will be blue and a blue tick will be present on the left hand side. The
date and time and time from when the photo was captured, the name of the device that captured the photo
will be displayed on the page. There will also be a yes/no on the right hand side which indicates if the user
has already viewed the photo or not.
An individual photo can be deleted if you press the Delete button while that photo is selected. All of the
recorded photos can also be deleted in one go with the use of the Delete All button
Call Record
The device will save every call it receives including missed, dialed or received calls. It will keep record of the
key details for each call including the location, date and time as well as if the call resulted in access being
granted or denied. Note that calls cannot be viewed and so the view button will lead to no action.
MSG Record
This feature is unavailable on this device.
Monitor
The monitor will allow for live video and audio surveillance from any connected video intercom devices. To
access the live video feed, click on the relevant device. On this page, users are able to adjust the volume of
the monitor (0 - 15), unlock the device and take a photo. The photo will appear in the records page which is
accessible from the home page. There is also a 60 second timer when streaming live video from a connected
device. After this time has elapsed, the device will return to the home page.
Mobile Access
The mobile access page is useful when connecting mobile devices to the monitor through the Tuya Smart
App. It also contains relevant information about the device.
WIFI Connection:
This page is useful for connecting to local WIFI networks which is a critical step when
connecting to mobile devices. The Next and Prev buttons can be used to toggle through the
various networks available. The Scan button will refresh the page and search again for new
networks. The Connect button will bring up a password input which if successful will connect the
monitor device to the network. Once a network has been connected, the connect button will be
replaced with a disconnect button which can be used to disconnect the device from the WIFI
network.
QR code:
The QR code page is used when connecting the device to the Tuya Smart App as seen on
page 4. 6

User Settings
System Info
Click “System Info” to see the following details: IP address. Extension Code, Mask, Gateway, Soft, MAC, PID,
ID and SC capacity.
Format: This will wipe the SD card
Read: This will automatically create folders for wallpaper, screen saver and ring files.
Ringtone
Custom audio files can be selected by uploading them as mp3 files onto an SD card in the ring folder.
The ringtone settings can be used to separately set the audio that is played when the monitor calls another
device or is called by another device. The Listen button can be used to play the ringtone options while the
pause button will pause this audio output.
Time & Date
A 24 hour time system is used by default and cannot be changed. However, the date and time of the device
can be set to any values.
The inputs are Year / Month / Day / Hour / Minute.
The date format can also be altered between Y / M / D, D / M / Y, M / D / Y and this will immediately be
reflected in the settings interface and will result in that order being displayed on the home page if and when
the save button is pressed.
Volume
The ring and talk volumes can be adjusted to the suitable volume. The default value is 6 and the volume can
be set to any value from (0 - 15). The key volume can also be turned on or off, this determines if audio is
played when a button is pressed on the monitor device.
Language
The language of the device can be changed to Russian, English, Chinese, Spanish, Turkish, Portuguese, Dutch,
French, Italian or Bulgarian. To set a language, press next or previous until the specific language appears in
one of the two boxes, click it and the press ok to set the language of the device.
Brightness
The brightness of the monitor screen can be adjusted between (0 - 100). Once the OK button has been
pressed, the change will be implemented to the device.
Wallpaper
The wallpaper of the device can be adjusted to any jpg file which is on the SD card in the wallpaper folder. To
select a wallpaper, select the wallpaper from the list and then press Set as Wallpaper.
The JPG file must meet the following requirements:
- Format = JPG
- Picture resolution <= 1920 x 1080
- File size <= 3 MB
If a custom wallpaper has been set and then the SD card containing that file is removed, the wallpaper will
return to default. However, if the SD card is put back into the device, the custom wallpaper will be displayed
again.
Screensaver
The screensaver settings can be adjusted between Photo Frame, Clock, Time and Off.
If there is no interaction with the monitor device for the duration specified in the Screensaver Delay setting
(see below) then the screensaver will activate.
The Photo Frame feature is unavailable on this device.
Clock will result in an analog clock being displayed on the monitor device for 60 seconds.
Time will result in a digital date and time display on the monitor for 60 seconds.
Off will result in the monitor screen turning off.
7

User Settings
Delay
There are 5 different delay settings that can be adjusted on this page:
Ringing time (5, 10, 15, 20, 30, 60, 90)
- This is the amount of time the monitor device for will ring for when the monitor receives a call from a
connected video intercom device.
Screensaver (30, 60, 90)
- This is the duration of time before the screensaver is activated on the monitor device.
Time Zone
All of the time zone options will be accessible by clicking previous or next. To set the time zone click on the
relevant time zone and then pressing Setting and the devices settings will be updated. The currently selected
time zone will be displayed above the setting button.
Video Brightness
The video brightness, contrast, saturation and hue can be adjusted from (0 - 100). Any changes will be
implemented once the save button is pressed.
System Settings
Default Password = 666666
Color Adjust:
The screen contrast, saturation and Hue can be adjusted in the range (1 - 100). As the values are adjusted,
the corresponding changes will immediately be made visible on the screen. These changes will then be made
permanent if the save button is pressed or be reverted back to the original settings if the back button is
pressed.
System Password:
The default system password is 666666.
The system password is used to access the system settings and can be changed with this setting. To change
the password, input the old password as well as the new password twice and then press OK. When the
device undergoes a system reset, the system password will be restored to default.
System Reset:
The system reset will restore the device back to the original factory default settings. This will wipe all settings
that have been altered on the device. This includes established Wifi connections and all user and system
settings. However, the connection to a smartphone device through the Tuya Smart app will remain after the
reset of the monitor device.
Turn on/off the ringtone by clicking on the ring button. This will determine if sound is played from the monitoring
device when it receives a call.
Ring
Turn on/off the ringtone by clicking on the ring button. This will determine if sound is played from the
monitoring device when it receives a call.
Monitor Door 1
Unlock
By clicking this button, the video feed and monitoring user interface will appear on the device.
For more information, see page 6.
The unlock button will unlock the connected video intercom device and trigger any gates or locks that are
connected to the
video intercom. It will remain unlocked for a period of time that can be determined by changing the settings,
see the delay section for more information about this. 8

Video Intercom Programming
Modes
Mode Purpose Indicator
Standby Unlocking the device LED light colour: White
Administrator To change password, general
settings and reset the device
LED light colour: White with red
flashing every second
Unlocked Unlock attached lock or trigger the
opening of an attached automatic
gate.
LED light colour: Green
Sound signal: Beep x 2 “The door is
unlocked, please come in.”
To enter the administrator operation mode
If the input is correct, Beep x 2 will sound and the LED will flash red every second.
To return to standby mode: wait 30 s until Beep x3 sounds or
*Admin Code #
Default Admin Code is 999999
*
Enter Administrator Operation Mode
Enter Unlocked Mode
Public Unlock Code:
The device allows for up to 200 unique public unlock codes to be added, each of these can be a replaced or
deleted. The public unlock code function can also be enabled or disabled in administrator mode.
To use the public unlock code
If the 4-6 Digit Code is valid and the device has public unlock codes enabled, the device will enter unlocked
mode.
Master Cards:
Either the Add Card Master Card or the Delete Card Master Card if swiped will always unlock the device.
User Cards and Passcodes:
Using the Master Cards, user cards can be added to the device and a unique 4 Digit Code can be assigned to the
card. To successfully unlock the device, the user must meet the requirements of the current setup mode.
To change the setup mode, see page 19 of the manual and to see further details of the user operations see
page 21.
4-6 Digit Code #
Reset
To restore the device to factory settings
If the input has been successful, the device will then immediately reboot itself (this will take 30s). During the
restart, the device will be restored to the original factory settings. However, this will not delete stored user
cards, master cards or stored passwords with the exception of the admin password and the 001 public unlock
code. The admin password will be restored to 999999 and the 001 public unlock code will restore back to
123456. This will also not alter the wired/wireless mode of the device.
Default Settings
The initial administrator passcode is 999999
The initial 001 public unlock passcode is 123456
The default door opening method is card opening
The default unlock time is 2 seconds.
The safe mode is off by default
*Admin Code # 0 99 #
Default Admin Code is 999999
9

Public Unlock Code
The public unlock code can be enabled and disabled by the administrator. This setting directly effects all
stored public unlock codes.
To disable the public unlock code
To enable the public unlock code
Once the status of the public unlock code has be updates, the device will Beep x2.
*Admin Code # 6 00 #
Default Admin Code is 999999
*Admin Code # 6 01 #
Modify Administrator Code
To change the administrator code
If successful, the device will sound Beep x 2.
*Admin Code # 0 77 #
Default Admin Code is 999999
New 6 Digit Code #New 6 Digit Code #
Modify Public Unlock Code
There can be up to 200 public unlock codes, each with a corresponding 3 digit position, the first code will have the 3 digit
position 001. Each of these codes can be added or deleted using the programming functionality below. This is useful when
managing the access permissions for larger groups.
To add or replace a public unlock code
If there is no existing passcode associated with the 3 digit position, the new code will be added. If there is an existing
passcode, it will replace the corresponding code for that 3 digit position. The 3 digit position can be any value from
001~200.
If successful, the device will sound Beep x 2.
*Admin Code # # 3 Digit Position933 #New 4-6 Digit Code #New 4-6 Digit Code #
Default Admin Code is 999999
Delete Public Unlock Code
To delete a public unlock code
If successful, the device will sound Beep x 2.
*Admin Code # # 3 Digit Position944 #
Default Admin Code is 999999
Default 001 Public Access Code is 123456
Setup Unlock Mode
The various unlock modes apply to user cards, each card will have an associated 4 digit code.
See the user operations section for more detail.
To enter card only unlock mode
In this mode, the user can only use a swipe card to unlock the device.
To enter card or passcode unlock mode
In this mode, the user either a swipe card or a 4 digit user code to unlock the device.
To enter card and passcode unlock mode
In this mode, the user has to first use a swipe card and then the corresponding 4 digit user passcode to unlock
the device.
*Admin Code #300 #Default Admin Code is 999999
*Admin Code #3 01 #
*Admin Code #3 02 #
10