EzCAP ezcap610 User manual

USB Turntable to MP3 converter
Quick Start Guide
Thanks for purchasing ezcap610 USB Turntable to MP3 converter. The following guides you how
to set up on your computer. Hope this device will bring you nice digital experience.
With this ezcap610 USB Turntable to MP3 converter, you can easily transfer your vinyl record to
MP3 format, so can play on iTunes, or mobile phones, etc.
Features:
1. PLATTER –Place your record here.
2. TONEARM –Comes with a ready to use
pre-balanced tone arm and cartridge.
3. 45 Rpm holder –For 7 inch 45 Rpm LP with big hole
4. On/Off and volume controller.
5. 33/45 switch
6. AA/DC switch –switch power
supply between AA battery and DC
7 LINE OUT
8. MINI USB –For power supply with 5V DC adapter
10. Battery compartment –4 * AA batteries
11. 45 Rpm adjuster
12. 33 Rpm adjuster

Note: The adjusters only for adjust when you think the speed is too fast or slow.
13. Speaker
How to play your recorders:
1. Undo and
lower arm clip.
2. Raise the tone
arm, then move it
to the side.
3. Place the
record on the
platter.
4. Lower the tone
arm onto record;
the record will
begin playing.
5. When finished,
raise the tone arm and return it to rest on the arm clip.
Converter on computer:
Insert the software CD (come with the package) to CD-ROM of computer, start to installAudacity:
Audacity for Windows OS

Audacity Software Installation
Please insert the Software CD into the CD drive, and read it.
Double click “Audacity 2.0.3 for Win.exe”file, and select the language you wanted, then click “OK”to
start installation.
Click “NEXT”and / or select the installation folder to go forward.
Please wait for installation finished, and click “Finish”to complete the installation.

Now, you need to set software for capturing and editing audio.
Audacity Software Guide
Double click “Audacity”icon on your desktop.
Please click “Edit”key on the software panel, and select “Preferences”.
Please set recording device to be “USB Audio Device”, and channels to “2(Stereo)”. And select “Software

Play through (Play new track while recording it)”.
Now, you can start to record analog audio to be digital MP3 format file.
Begin playing your vinyl or cassette and click red record key (see below) to start recording audio - when
you want to finish, click the yellow stop key.
Now you can export the recording audio into MP3 format files in your computer.