EZee Life CH 1064 User manual

Model: CH1044
Model: CH 1066
EZee Life™ Products
220 Wildcat Road, Toronto, ON M3J 2N5
Bath Chair with Removable Back
Model: CH 1064
…...............................................

Specifications:
Weight capacity 300 lbs. (136 gs)
Slight contour seat with drainage holes
Extra hole for placement of hand held shower head
Non slip feet for extra safety
Durable rust proof aluminum frame
Foot print 16.5” (42cm) x 16.5” (42cm)
Seat width 19.5” (49.5cm) (red handle removed)
CH 1064 Seat depth 13” (33.0cm)
CH 1066 Seat depth 13” (33.0cm)
Seat height 13.5” (34.3cm) -17.5” (44.5cm)
CH 1064 Bac height 15” (38.1cm)
CH 1064 Bac width 17” (43.2cm)
Features:
Adjustable height seat
Maintenance free aluminum frame
Easy to clean moulded seat and bac
Light weight
300 lb (136 gs) weight capacity
Support handle can be mounted on either side
Limited Warranty:
Ezee Life™ products carry a one year warranty against manufacturing
defects, faulty materials and wor manship only.
Any alterations, misuse, abuse, or accidental damage voids this
warranty. Ezee Life™ reserves the right to replace or repair any part
that has become defective.
The warranty does not extend to consequential costs resulting from
the fault or defect of the product: freight and travel costs, loss of
earnings, or other expenses that one may incur.
Warranty is valid for the original purchaser only and the original receipt
must be presented before any warranty options are considered.
Please also be prepared to provide the date of purchase and serial
number.
2

Operating Instructions
Adjusting the Seat Height
1. Depress the pin loc button (1).
2. Slide the lower leg tube to the desired height and
line up the adjustment holes (2) with the pin loc and
allow the pin to pop through.
3. Repeat this procedure for all four legs.
Note: Ensure all four legs are set to the same height.
Failure to set all the legs the same height will ma e the
bath chair unstable and could lead to an accident.
Attaching the CH 10 4 Back
The bac rest for the CH 1064 simply snaps into place.
Insert into bac rest slot and push down.
Safety Information
Ensure there are no loose or damaged parts before using this
bath chair.
Ensure the rubber leg tips are not loose or damaged before using
the bath chair. If loose or worn, replace or repair.
To avoid tipping, DO NOT attempt to reach objects that are at a
distance that require you to lean towards what you are reaching for.
To avoid tipping, DO NOT lean over the bac of the bath chair.
DO NOT sit or transfer into the bath chair unless it is fully open.
Use caution on slippery surfaces.
DO NOT stand on seat.
DO NOT overload this bath chair. The weight capacity is 300
pounds (136 gs).
3