EZTRUNK 1900 0074 User manual

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 1
PO#
:
Scan QR CODE for Video &
PDF MANUALS
MAKE IT
MAN
U
A
L
A
SS
EMBL
Y
WE CAN HELP YOU!
Customer Service
Any question? WE ARE HERE TO HELP!
EMAIL US: [email protected]
Text or Call 203-901-0055 / Call 203-591-9060
7 days a week 8:30 am EST
Vehicle Hard Top Lift Aid
#1900 0074
Print the latest manual &
Watch the Video

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 2
NO Illustration Description Part# QTY.
1
A
B
Upright Pillar 19007401 1
2 Base Tube Long Side 19007402 1
3Base Middle Tube 19007403 1
4 Base Tube Short Side 19007404 1
5 Pillar Base Plate 19007405 1
6 Wheel 19007406 4
7Slanted Tube 19007407 1
8 Top Front Rail 19007408 1
9 Top Support 19007409 1
10 Top Back Rail 19007410 1
11 Handle Bar 19007410 1
12 Worn Gear Winch 19007412 1
13 Wheel Lock Nut M8
Pre Installed on Wheel 10082 4
14 Top Rubber Pad 19007414 6
15 Bolt M8x65 08652 4
16 Bolt M8x70 08702 8+1 extra
17 Lock Nut M8 10082 12 + 2 extra
18 Lock Nut M10 10102 3 + 1 extra
19 Hex Head Bolt M10x65 10652 3
20 Webbing Pipe(on part #1) 19007415 1
21 Locking Pin 28720 2
22 Pull Pin 18600 1
23 #5 Allen Wrench #5 1
24 #13 & #15 Wrench #1315 2
Please read instructions fully before beginning assembly

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 3
Component parts for Base.
Lay down the compoent parts as part lists NO order make it easy to get it.
1
Install the wheels to 2 Base tubes.
2
Install Upright Pillar to Base Long Side.
Attention: Wheels side is bottom side, upright pillar is upper
side.
4
Install Slanted Tube to sliding bracket. Install 4 Bolts to hole rst and after tightness
the 4 Nuts to the bolts.
6
wider
Short
Install Middle Tube to Base Short Side with 2 bolts and nuts.
3
Install Middle Tube to Base Tube Long Side, Keep bolt head same as other side of
middle tube. Don't over tightness the bolt.
5
28722
19007401
19007401
19007402
Base tube long side
19007402
Base tube long side
19007402
Base tube long side
19007402
Base tube long side
19007404
Base tube short side
19007405
19007405
19007403
19007403
19007404
08652
08652
08702
10652
10082
10102
19007407
10082
10082
19007406 19007406
10082

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 4
Install Front Rail and Rear Rail to Support part.
Make Sure the REAR HOLE location rst and install rear rail.
8
Install the Top Support set to slanted tube. Keep the plate locked with Pin all the
time when stands.
9
Put the pipe in the loop of webbing. Install the pipe in the Bracket.
10
Install Handle Bar and Gear Winch to Upright Pillar #A with bolts #08702 and nuts.
Install Part #A to upright pillar #B with bolts # 08652 and nuts.
IMPORTANT: Keep the gear of Winch on low side. TIP: Use a paper tape to attach a
nut on wrench for lower bolt.
7
08702
#A
#B
08652
08702
19007415
Gear Winch
Webbing
08702
Top Front Rail Top Rear Rail
REAR HOLE
10082
10082
18600
10082
28720
Put the Pull Pin in hole on Bracket.
Assembly completed.
11
Folding Option
Remove the Pull Pin from Sliding Bracket. Roll down the Sliding Bracket to bottom.
Loose webbing from Worn Gear Winch to move sliding bracket to base tube.
12

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 5
Fold Lift Aid upright Pillar on the ground
Use the Webbing with Hook bind Middle tube to Upridht Pillar. Hooks goes in the
slot on the slanted tube and pull the other side of webbing tight.
Move Slanted Tube close to Upright Pillar and put pin in the hole to lock the tube.
Fold down the Middle Tube and install the Locking Pin back the previous hole.
CAUTION: Need to hook the Lift Aid to the wall when storage. Avoid make an
accident when foding down.
Folding Option
13
Folding Option
14
Folding Option
15
Folding Option
Folding Option
16
17 18
You can adjust the top support ground level with 2 bolts on top or second hole at
slanted tube.
When you storage the hardtop on the Lift Aid. keep away from the children reach.
Roll down the hardtop as the lowest as possible.

BEFORE BEGINNING,SEE THE ASSEMBLY INSTRUCTION VIDEO ON EZTRUNK.NET
Vehicle Hard Top Lift Aid
Ver A_06/8/22
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
Page 6
Drive vehicle on even ground.
Remove the Bolts from vehicle Hard top bottom edge.
Take off the freedom Hard tops. Disconnect the wire cable, open the rear doors.
Slid the Front rail forward, keep the top support even touch hardtop. You can install
provided rubber pads on top rail and high to support the hardtop even.
21
Hook both webbing to rear window hinge bracket and pull the webbing tight. Lift
the Hard top off the vehicle.
23
Push Lift in the vehicle, set the support close middle of hard top.
20
Install Rubber Pand on top rials if necessary. Be careful the don not hit the vehicle
with bolts.
22
Lifting Hard Top
19
WE CAN HELP YOU!
Customer Service
Any question? WE ARE HERE TO HELP!
EMAIL US: [email protected]
203-901-0055 / Call 203-591-9060
7 days a week 8:30 am EST