Ezviz CS-CV206 User manual

Scan the QR code with the EZVIZ App
to add the device to your account.
Please keep it for further reference.

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs
are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred
to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”)
cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless
otherwise stipulated, EZVIZ does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the Manual is
subject to change, without notice, due to rmware updates or other reasons.
Please nd the latest version in the ™ website (http://www.ezvizlife.
com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties
of EZVIZ in various jurisdictions. Other trademarks and logos mentioned
below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,
IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT
WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE
LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN
IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL
PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY

OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION
OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION
OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF
NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR
THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD
PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT
TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY
JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
This Camera complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This Camera may not cause harmful interference, and
(2) This Camera must accept any interference received, including interference
that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for
a Class B digital Camera, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This product generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modication not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
This Camera complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this Camera may not cause interference, and
(2) this Camera must accept any interference, including interference that may
cause undesired operation of the Camera.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more
information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the Radio
Equipment Directive 2014/53/EU, the EMC Directive 2014/30/
EU, the RoHS Directive 2011/65/EU.

Гарантийный срок-1 год
Срок службы-3 года
Производитель:Ханджоу Хиквижн Диджитал Технолоджи(Китай)
Импортер-поставщик в России: ЗАО ''Хиквижн''
Импортер-поставщик в Республике Беларусь:ООО ''Торговый Дом
''АВАНТ-ТЕХНО''
Сайт:www.ezviz.ru
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou EZVIZ Software Co., Ltd . declares that the radio equipment
type [CS-CV206] is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the
following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
Due to the product shape and dimension, the name and address of the
importer/manufacturer are printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our
local contact details.
SAVE THIS MANUAL FOR FUTURE REFERENCE

1
Setup
Step 1 Power-on
Plug the power cable into the camera and to the power adapter
and then into a power outlet, as shown in the gure below.
Power Cable
Power Outlet
Step 2 Camera Setup
1.Create a user account
-Connect your mobile phone to Wi-Fi using your 2.4GHz network.
-Download and install the EZVIZ app by searching “EZVIZ” in
App Store and Google PlayTM.
-Launch the app and register for an EZVIZ user account
following the start-up wizard.
2.Add a camera to EZVIZ
-Log in the EZVIZ app.
-From the EZVIZ app Home screen, tap “+” on the upper-right
hand corner to go to the scan QR code interface.

2
-Scan the QR Code on the bottom of the camera.
Bottom of the
Camera
-Follow the EZVIZ app wizard to nish Wi-Fi conguration.
Please make sure your phone is connected to the 2.4GHz
Wi-Fi from the router for Wi-Fi conguration.
3.Change the default password (Optional)
After adding the camera, you are required to change
the device password to ensure your video security. The
password is used for the Image Encryption. If you turn
on the Image Encryption, you are required to input your
password when you live view or play back the camera.
-Go to the camera settings screen to change the default
password.
-Tap on “Change Password”.
-Tap on “Edit”.
-Enter the original verication code located on the bottom
of the camera.
-Enter the new password. Please use letters and numbers
between 6 to 12 characters.

3
Installation
Step 1 Install the Metal Plate (Optional)
Pick a clean and at surface and secure the metal plate
to the desired position with the foam stickers or screws
(not included).
There’s a magnet piece inside the camera. You can skip
this step if the surface is made of metal.
Step 2 Install the Camera
Secure the camera magnetically to the metal plate or metal
surface (see gure below).
Metal Plate
Foam Sticker
Step 3 Complete Installation
Adjust the camera angle as required.

4
Appendix
Basics
Speaker
Power Input
microSD Card Slot
RESET
Magnetic Base
Lens
Microphone
LED Indicator
IR Light
Name Description
Speaker Two-way talk.
Power Input 5V±10%
micro SD Card For micro SD card (not included with this product). You
can purchase separately. Recommended compatibility:
Class 10, maximum space 256GB. After inserting the
card, you can record the event inside the camera.
RESET Hold down the RESET button for 5 seconds while
the camera is running, the camera restarts and all
parameters are reset to default.

5
Name Description
LED Indicator • Solid Red: Camera is starting up.
• Slow-Flashing Red: Wi-Fi connection has failed.
• Fast-Flashing Red: Device exception (e.g. MicroSD
card error).
• Solid Blue: Video is being viewed or played back in
EZVIZ App.
• Fast-Flashing Blue: Camera is ready for the Wi-Fi
connection.
• Slow-Flashing Blue: Camera is running properly.
IR Light
Auto light source for dark environment. The camera
video has two modes: color (for daylight recording) and
black and white with IR illuminator (for night condition).
Box Contents
Camera (x1) USB Cable (x1) Power Adapter (x1)
Foam Sticker (X2)
Metal Plate (x1)
(3.5mm Hole Diameter) Quick Start Guide (x1)

6
Install Memory Card
Insert a micro SD card into the slot until a click.
Initialize Memory Card
1.In the EZVIZ app, check the memory card status by tapping
on the Storage Status in the Device Settings interface.
2.If the memory card status displays as Uninitialized, tap to
initialize it. The status will then change to Normal. You can
then start recording any event triggered video in the camera
such as motion detection.

7
Troubleshooting
Q: “The device is oine.” or “The device is not registered.” prompts
appear when adding the camera using the EZVIZ App.
A: 1.Make sure the network, which the camera is connected to, is
working properly and the router’s DHCP is enabled.
2.Hold down the RESET button for 5s to reset the settings if you
change the network parameters.
Q: The mobile phone cannot receive alarm prompts when the
camera is online.
A: 1.Make sure the EZVIZ app is running on your mobile phone.
2.For Android OS mobile phone, make sure the app is running
in the background; and for iOS mobile phones, enable the
message push function in “Settings > Notication”.
Q: Does the camera support power via USB devices or a portable
battery?
A: It’s advised to use the EZVIZ standard power adapter to provide a
stable voltage supply.
For detailed information, please visit www.ezvizlife.com.

8
Conguration
Étape 1 Mise sous tension
Branchez le câble d’alimentation à la caméra puis l’adaptateur
d’alimentation à une prise électrique, comme illustré dans la
gure ci-dessous.
Câble d’alimentation
Prise électrique
Étape 2 Conguration de la caméra
1. Création d’un compte utilisateur
-Connectez votre téléphone mobile à votre réseau Wi-Fi 2,4 GHz.
-Téléchargez et installez l’application EZVIZ en recherchant
« EZVIZ » dans l’App Store ou Google PlayTM.
-Lancez l’application et créez un compte utilisateur EZVIZ en
suivant l’assistant de démarrage.
2. Ajout d’une caméra à EZVIZ
-Connectez-vous dans l’application EZVIZ.
-Depuis l’écran d’accueil de l’application EZVIZ, appuyez sur « + »
dans le coin supérieur droit pour accéder à l’interface de lecture
du code QR.

9
-Scannez le code QR situé sur le fond de la caméra.
Fond de la
caméra
-Suivez l’assistant de l’application EZVIZ pour terminer la
conguration de la connexion Wi-Fi.
Veuillez vérier que votre téléphone est connecté au réseau Wi-Fi
à 2,4 GHz à partir du routeur pour effectuer la conguration Wi-Fi.
3. Modication du mot de passe par défaut (facultatif)
Après avoir ajouté la caméra, vous devrez modier le mot de
passe de l’appareil pour garantir la sécurité de votre vidéo. Le
mot de passe est utilisé pour le chiffrement des images. Si
le chiffrement des images est activé, vous devrez saisir votre
mot de passe au moment de l’afchage de la vue en direct ou
pour lire les vidéos de la caméra.
-Accédez à l’écran des réglages de la caméra pour modier le
mot de passe par défaut.
-Appuyez sur « Change Password » (Modier le mot de passe).
-Appuyez sur « Edit » (Modier).
-Saisissez le code de vérication d’origine situé sur le fond de
la caméra.
-Saisissez le nouveau mot de passe. Veuillez utiliser des
lettres et des chiffres pour le mot passe d’une longueur de 6 à
12 caractères.

10
Installation
Étape 1 Installation de la plaque métallique (facultatif)
Choisissez une surface plane et propre, puis xez la
plaque métallique à la position souhaitée à l’aide des
autocollants expansés ou des vis (non fournies).
La caméra dispose d’un élément magnétique interne.
Ignorez cette étape si la surface est métallique.
Étape 2 Installation de la caméra
Fixez à l’aide de sa partie magnétique la caméra sur la plaque
ou la surface métallique (voir la gure ci-dessous).
Plaque métallique
Autocollant
expansé
Étape 3 Fin de l’installation
Ajustez l’angle de la caméra le cas échéant.

11
Annexe
Notions de base
Haut-parleur
Entrée d’alimentation
Logement de la carte
microSD
RÉINITIALISATION
Base magnétique
Objectif
Microphone
Indicateur lumineux
Éclairage IR
Nom Description
Haut-parleur Conversation bidirectionnelle.
Entrée
d’alimentation
5 V ±10 %
Carte microSD Pour carte microSD (non fournie avec ce produit). Vous pouvez
l’acheter séparément. Compatibilité recommandée : classe 10,
capacité maximale de 256 Go. Après avoir inséré la carte, vous
pouvez enregistrer les événements sur la caméra.
RÉINITIALISATION Maintenez enfoncé le bouton de RÉINITIALISATION pendant 5 s
alors que la caméra fonctionne. La caméra redémarrera et tous
les paramètres seront réinitialisés aux valeurs par défaut.

12
Nom Description
Indicateur
lumineux
• Rouge xe : la caméra est en cours de démarrage.
• Clignotement lent en rouge : la connexion Wi-Fi
a échoué.
• Clignotement rapide en rouge : anomalie de l’appareil
(p. ex. erreur de carte microSD).
• Bleu xe : la vidéo est en cours de visionnage ou
de lecture dans l’application EZVIZ.
• Clignotement rapide en bleu : la caméra est
prête à établir la connexion Wi-Fi.
• Clignotement lent en bleu : la caméra fonctionne
normalement.
Éclairage IR
Source lumineuse automatique pour les lieux sombres.
La caméra dispose de deux modes vidéo : couleur
(pour l’enregistrement en lumière du jour) et noir et
blanc avec l’éclairage IR (fonctionnement de nuit).
Contenu du carton
1 caméra 1 câble USB 1 adaptateur d’alimentation
2 autocollants
expansés
1 plaque métallique
(Orice de 3,5 mm de
diamètre)
1 guide de démarrage
rapide

13
Installation d’une carte mémoire
Insérez une carte microSD dans le logement jusqu’à
ce que vous entendiez un clic.
Initialisation de la carte mémoire
1.Dans l’application EZVIZ, vériez l’état de la carte mémoire
en appuyant sur « Storage Status » (État du stockage) dans
l’interface « Device Settings » (Réglages de l’appareil).
2.Si l’état de la carte mémoire afché est « Uninitialized »
(Non initialisé), appuyez sur la commande pour l’initialiser.
L’état deviendra alors « Normal » (Normal). La caméra
commencera à enregistrer la vidéo dès qu’un événement
déclenchera l’enregistrement, tel que la détection d’un
mouvement.

14
Résolution des problèmes
Q: Le message « The device is oine » (l’appareil est hors ligne) ou
« The device is not registered » (L’appareil n’est pas inscrit) apparaît
au moment de l’ajout de la caméra dans l’application EZVIZ.
R: 1. Vériez que le réseau, auquel la caméra est connectée, fonctionne
correctement et que le service DHCP du routeur est activé.
2. Maintenez le bouton RÉINITIALISATION enfoncé pendant
5 s pour réinitialiser les réglages si vous avez modié les
paramètres de réseau.
Q: Le téléphone mobile ne reçoit pas les messages d’alarme lorsque la
caméra est hors ligne.
R: 1. Vériez que l’application EZVIZ est en exécution sur votre téléphone
mobile.
2. Pour un téléphone mobile sous système Android, vériez que
l’application s’exécute en arrière-plan . Pour un téléphone mobile
sous système iOS, activez la fonction de message direct (push)
dans « Settings » (Réglages) > « Notication » (Notication).
Q: La caméra peut-elle être alimentée via des ports USB ou une batterie
portable ?
R: Il est conseillé d’utiliser l’adaptateur d’alimentation EZVIZ standard pour
fournir une tension électrique stable.
Pour obtenir des informations détaillées, visitez le site www.ezvizlife.com.
EXPOSITION AUX RADIOFRÉQUENCES (RF)
Les bandes de fréquence et les limites nominales de la puissance transmise
(rayonnée ou par conduction) applicable à ce dispositif radio sont les
suivantes :
Bande Wi-Fi 2,4 GHz
Fréquence De 2,412 GHz à 2,472 GHz
Puissance transmise (PIRE) 60 mW