Faber 6058028 User manual

downdraft vent system
pops up and down
flush with cooktop in down position
sleek design
safety microswitches
500 cfm for internal blower
900 cfm for remote blower
variable speed control
dishwasher safe grease filters
stainless steel trim
four way venting
sone range: 3.5 - 6.5
3 1/4” x 10” duct (internal)
10” round duct (remote)
Size/Color/Model #
30 SS Internal
36 SS Internal
30 SS Remote
36 SS Remote
900 cfm Rmt Blwr
°
°
°
°
°
°
°
°
°
°
°
°
°
°
SCIR3008IB
SCIR3608IB
SCIR3008RB
SCIR3608RB
RBORIG900
The Scirocco downdraft is perfect for island installations,
where an overhead canopy would be obstructive, or wall
installations where cabinet space is at a premium.
READ THE INSTALLATION
INSTRUCTIONS FOR BOTH
THE REMOTE BLOWER AND
THE SCIROCCO DOWNDRAFT
SYSTEM BEFORE INSTALLING
EITHER PRODUCT.
NOT FOR USE WITH COMMERCIAL COOKTOPS
For more power, the
Remote Blower can be
mounted on the wall or roof
outside the home
Safety microswitches on
the grease filters prevent
the Scirocco from lowering
when grease filters are not
installed.
Spring secured top trim
pops off automatically if an
object or finger obstructs
its path.
Momentary delay up/down
button prevents the unit
from raising or lowering
when cleaning the top trim.
Rising a full 8 1/4” above the cooktop, the Scirocco vents horizontally
across the cooking surface and down through the exhaust vent. At
the press of a button, the stainless steel Scirocco retracts back down
into the counter.
Scirocco
a disappearing downdraft
Integrated Collection
p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [email protected] • www.faberonline.com

Internal Blower Model Remote Blower Model
WARNING! You must know the cook top cutout to determine the
downdraft cutout. Consult the cook top manufacturer’s installation
instructions before cutting the counter top.
Dimensional Diagrams
Rev. 07/11
WARNING! Product specications are subject to change without notication. Consult the installation instructions for
both the remote blower and the ventilation system before you begin installing this rangehood.
A black plastic duct collar plate (provided
with the remote blower) attaches to the
front of the downdraft plenun over this 9”
hole. The 10” (25.4 cm) round duct system
attaches to this duct collar plate.
Ductwork Cutout Dimensions
For Internal Blower Model Only!
Countertop Cutout Dimensions
For Both Internal and Remote Models