Factorylux GoOutside VALENTINA User manual

GoOutside™
NOTE: Wall light mounting box to be mounted at 45°
. Drill  × mm holes × mm deep at . mm centre spacings
. Insert plastic plugs into holes
. Remove  × M socket screws to detach back plate using supplied .mm hex key
. Use screwdriver and supplied medium screws to fix back plate to the surface
(alternatively, use supplied short screws only to fix to a timber surface)
. Use supplied WAGO connectors to make L, N and Wconnections
• Flip integrated orange lever up to open position
• Insert exposed conductor to stopping point
• Return lever to closed position
. Place L + N WAGO connectors inside WISKA gel box and ensure it closes fully.
. Replace  × M socket screws to secure box on back plate
INSTALLATION
• Drill + mm masonry drill bit
• mm + mm + mm flat head screwdrivers
TOOLS REQUIRED
• Wall lights to be mounted on vertical surface only, with light source facing
down. CAUTION: Failure to install correctly may cause moisture to collect
• Pendant lights to be mounted on horizontal surface only
INSTALLATION NOTES
No user serviceable parts. If light source replacement is required or in the event
of failure, fault or damage shut o power and contact our technical department
via factorylux.com
TROUBLESHOOTING
You can find out when and by whom your product was made, tested and certified
to BS EN 60598 / BS 4533. Search the unique batch code (found on label) at
factorylux.com. You’ll even find out what was hot news in the Hebden Bridge
Times the day your product was made
DID YOU KNOW…?
WARNING: Shut o power and allow to cool
• Wipe gently with a dry, soft, cotton cloth
• Cleaning products, scratching, abrasion, damp, oils, liquids etc may have
a detrimental eect
• Metal Shades (only) can be polished using metal polish
HANDLING & CLEANING
WIRING DIAGRAM
• Installation by a competent person, in accordance with current building and
wiring regs. Find an NICEIC registered contractor at factorylux.com
• Class 1
• IP65; failure to install correctly could aect IP rating
• Bathroom installation by authorised contractor only
• Shut o power to the circuit before installation
• Max ambient temperature 35°C
• Ensure WISKA box is closed fully with 2 WAGOs inside
• Always use fixings appropriate for the mounting surface (screws supplied may
not be suitable)
• Ensure light source does not contact surfaces
WARNING
We post regular design and product information via social media
and our blog. You can also contact us via instant support or email
[email protected]om
STAY UP TO DATE
WHAT’S INCLUDED
 ×
-terminal
WAGO
connector
(L, N, W)
 ×
medium
screw
 ×
plastic
plug
 ×
short
screw
 ×
2.5mm hex key
Live
Supply
Luminaire
Live
EARTH FLY
LEAD
EARTH
WISKA
BOX
WAGO
WAGO
WAGO
Luminaire
Neutral
Neutral
Supply
• Press to open
• Insert clips into side
buckle to secure
Secured & protected connection in 3 steps
2. 3.
1.
10 mm
 ×
WISKA
BOX
Thank you for purchasing this Factorylux product. It has been designed and hand
built in the UK to give you many years of reliable service. Please read these user
instructions carefully. All user instructions available to download at factorylux.com
YOUR PRODUCT

. KAY PENDANT
. JUNKO WALL LIGHT
. VALENTINA PENDANT
. KATIA WALL LIGHT
Old Trouser Factory | Greenhill Industrial Estate | Mytholmroyd | Hebden Bridge | HX QF
Designed, made & tested in the UK to BS EN 60598 / BS 4533
1_INS_GoOutside_1806
© Factorylux. All rights reserved. Factorylux is a registered trade mark
Back Plate
Back Plate
Back Plate
Back Plate Socket Screws
Socket Screws
Socket Screws
Socket Screws