FAMOCO PX400 User manual

User Manual
PX400
Professional Android Device

2
Table of contents
User Manual............................................................................................................................1
1. Copyright ............................................................................................................................3
2. Trademarks.........................................................................................................................3
3. Warnings and safety notices ...........................................................................................4
4. Limitation of liability..........................................................................................................4
5. About this manual .............................................................................................................5
6. Device layout........................................................................................................................6
6.1 External view............................................................................................................................ 6
6.2 Keys, buttons, led & ports...................................................................................................... 7
7. Package contents..............................................................................................................8
8. Getting started ...................................................................................................................9
8.1 How to switch the device ON or OFF.................................................................................... 9
8.2 Home screen and synchronization ......................................................................................10
8.3 LED colors...............................................................................................................................12
8.4 How to access the dashboard ..............................................................................................13
8.5 How to find your specific Famoco ID...................................................................................13
8.6 How to charge the device......................................................................................................14
8.8 How to change the battery ....................................................................................................15
8.10 How to read an NFC card ....................................................................................................16
8.11 How to use the printer .........................................................................................................17
8.12 About the SIM slots..............................................................................................................18
9. Technical specifications................................................................................................. 19
10. Warranty information.................................................................................................... 20
11. Safety and general information ................................................................................... 21

3
1. Copyright
Copyright ©2018 Famoco. All rights reserved.
This manual is protected under international copyright laws.
No part of this manual may be reproduced, distributed, translated, or
transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording, or storing in any information storage
and retrieval system, without the prior written permission of Famoco.
We reserve the right to make modifications on print errors or update
specifications without prior notice.
2. Trademarks
oFamoco and the Famoco logo are registered trademarks of
Famoco.
oThe Android logo is the trademark of Google, Inc.
oBluetooth® is a registered trademark of Bluetooth SIG, Inc.
worldwide.
oWi-Fi® and the Wi-Fi logo are registered trademarks of the Wi-Fi
Alliance.
oAll other trademarks and copyrights are the property of their
respective owners.
FAMOCO SAS
59 avenue Victor Hugo, 75116 Paris –FRANCE
[email protected]
www.famoco.com

4
3. Warnings and safety notices
Please read all the safety notices before using this device. Do not use the
device near fuel or chemicals or in any prescribed area such as service
stations and refineries. Do not transport or store flammable gas, liquid or
explosives in the same compartment of your vehicle as your device and
accessories.
4. Limitation of liability
Famoco shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or in
connection with using this product, whether or not Famoco had been
advised, knew or should have known the possibility of such damages. The
user should refer to the enclosed warranty card for full warranty and
service information.

5
5. About this manual
Congratulations on becoming the owner of a Famoco PX400 device. This
user manual is specially designed to detail the device’s functions and
features.
Please read this manual before using the device to ensure safe and
correct use.
oDescriptions are based on the device’s default settings.
oImages and screenshots may differ in appearance from the actual
product.
oContent may differ from the final product, or from software provided
by service providers or carriers, and is subject to change without
prior notice.
oAvailable features and additional services may vary by device,
software, or service provider.
oApplications and their functions may vary by country, region, or
hardware specifications. Famoco is not liable for performance
issues caused by applications from any provider other than Famoco.
oFamoco is not liable for performance issues or incompatibilities
caused by edited registry settings or modified operating system
software. Attempting to customize the operating system may cause
the device or applications to work improperly.

6
6. Device layout
6.1 External view
1.
Contactless card reader
2.
58mm Thermal Printer
3.
Microphone
4.
Led indicators
5.
Soft buttons
6.
Camera
7.
Speaker
8.
Battery compartment
cover
9. Volume buttons
10. Power button
11. Micro-USB Port
12. DC Port

7
6.2 Keys, buttons, led & ports
Name
Function
Power button
Long press: turn the device ON/OFF
Short press: screen ON/OFF (standby
mode)
Volume up & down
Press to turn the volume up or down
Micro USB port
Connect the device to a USB power
source
Indicator light
Turn red to indicate when the device is
charging and green when full charge
level is reached
DC Power charger port
Connect the device to a jack cable
power source

8
7. Package contents
Check the product box for the following items:
1 PX400 device
1 battery
Note:
oThe items supplied with the device and any available accessories
may vary depending on the region or service provider.
oThe supplied items are designed only for this device and may not be
compatible with other devices.
oAppearances and specifications are subject to change without prior
notice.
oThird party accessories may not be compatible with your device.
1 Plug
1 DC jack charger
1 User manual
manual

9
8. Getting started
8.1 How to switch the device ON or OFF
To power ON:
Press and hold the power button for three seconds then release. The
home screen will be displayed after a few moments.
To power OFF:
Press and hold the power button for two seconds, then select shut down
option on screen.
Standby mode:
The device enters the standby mode after 30 seconds by default if left
alone.
1. Power button

10
8.2 Home screen and synchronization
Once your device is switched on it will start synchronizing.
If there are no applications installed on it yet, the device will be locked on
a screen that shows the following indication to configure the internet
connection:
To set up your device you need connectivity so that it can synchronize.
Please install a SIM card orset upWi-Fi or contact your customer support.

11
If there is connection, one of the following screens will appear (depending
on the synchronization status):
If the synchronization is in progress, please wait until it is complete.
If the synchronization is complete but no applications have been installed,
or if the synchronization has been aborted, please contact your customer
support.

12
8.3 LED colors
The LED on the device can show different colors.
Those colors are defined by the application but there are default features:
Red
Battery charging
Green
Battery charged
Blinking red
Low battery

13
8.4 How to access the dashboard
When your device is switched on you can access the dashboard by
pressing the volume up button for three seconds and then release it.
In the dashboard you will find:
oTime
oFamoco serial number
oConnectivity
oBattery level
oBrightness (that you can modify)
oVolume (that you can modify)
8.5 How to find your specific Famoco ID
There are two ways of finding the Famoco ID:
Press the volume up button to access the dashboard and then press the
owner’s name. The Famoco ID is written at the top.
Or: Open your device and remove the battery (see 8.6 for more
information). The serial number is written on the device under the
battery.

14
8.6 How to charge the device
To charge the device, only use micro USB port (option 1) or the jack
charger (option 2) with the respective cables supplied:
1. Insert the charger cable carefully. Check that the plug and socket
are aligned.
2. The indicator light will turn red to indicate that the device is charging
and will turn green when full charge level is reached.
The device can also be charged by connecting it to a computer using the
DC cable or micro USB cable supplied.

15
Connecting the charger improperly may cause serious damage to
the device. Any damage caused by misuse is not covered by the
warranty.
Please do not charge from USB OTG and DC jack at the same
time.
Note: The device will power off automatically when the battery reaches
2%.
8.8 How to change the battery
1. Unclip the button where the circle is and remove the back cover.

16
2. Remove the cable connector from the socket.
3. Remove the battery.
4. Insert the new battery with white plastic case in the place holder
(with label up).
5. Press the battery down into the case.
6. Push gently to close the back cover.
8.9 How to use the battery
Charge the battery promptly when empty. Do not leave the battery in a
discharged state.
Keep your device and battery cool. High temperatures degrade the
battery more quickly. The battery will not charge when over 45°C.
Do not leave on charge for more than 10 hours.
When not using the device for long periods, charge to approximately 40%
and remove the battery.
8.10 How to read an NFC card
To read an NFC card, you need to bring the card near the upper front part
of the device, just behind the printer. The device can read a NFC card at
less than 3cm.

17
The PX400 is able to read/write read/write NFC forum tags 1,2,3,4, Type
MIFARE Classic Tag (full Mifare-ultralight/1k/4k, Mifare Desfire)
8.11 How to use the printer
The PX400 has an embedded thermal printer on the front face. This
printer is able to print receipts based on the application that you are
using in the device.
The printer works with 58mm wide paper rolls.
To replace the roll please remove the upper front cover of the PX400
and insert the new paper roll.

18
8.12 About the SIM slots
The PX400 has 1 SIM and 1 SAM. They can be found beneath the back
cover of the device and the battery. Please refer to chapter 8.8 for further
details on how to access the battery for the PX400.
Do not attempt to remove any of the installed cards.
In case of any operational problem, contact your administrator.

19
9. Technical specifications
Processor
Type
Quad-core
Speed
1.1GHz
OS
Secure Android (6.x)
Memory
RAM
1GB
Mass Storage
8GB
Display
Characteristics
5.5’’ (720x1280 pixels) IPS
Touch Panel
5 touch points
Secure
Elements
Embedded SE
MAX 32550
Removable SE
SAM slot (2FF format)
NFC
Operating modes
Reader/writer/peer-to-peer
Card emulation (ISO 14443-A)
Type of tags
supported
NFC Forum 1,2,3,4.
MIFARE, Desfire
Connectivity
2G/GPRS/EDGE
850/900/1800/1900 MHz
3G
850/900/1900/2100 MHz
4G
FDD: 800/900/1800/2100 MHz
TDD: 1900/2300/2500/2600 MHz
Wi-Fi
802.11 b/g/n
Bluetooth
4.0
Camera
0.3MP optimized for barcode
reading
Size
L x W x H
188 x 81 x 69 mm
Weight
310g
Battery
2x2600 mAh, Removable
Power supply
Micro USB
DC Jack charger

20
10. Warranty information
The warranty does not apply to defects or errors in the product caused
by:
1. Normal wear and tear, misuse, mishandling, and physical damage.
2. Exposure to water or any other liquids or solvents.
3. Any unauthorized disassembly, repair or modification.
4. Power surges, lightning, fire, flood or other natural events.
5. Use with unauthorized third-party products such as generic
chargers.
6. Any other cause beyond the range of normal usage for products.
7. The end user shall have no right to reject, return, or receive a refund
for any product under the above-mentioned situations, not excluding
your statutory rights under national law.