Fanimation Zonix FP4620 Series User manual

The Zonix™
FP4620 Series
SPECIFICATION SHEET
Product Specifications Subject To Change

Copyright 2008 Fanimation, Inc. 2008/06
The Zonix™Fan Assembly – FP4620**
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free [phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.com
Available Finish
OB Oil-Rubbed Bronze
SN Satin Nickel
7´ min
Floor
Ceiling
Blade Sweep = 54˝dia
Net Hanging Weight: 20 lbs
6˝dia
14° Blade Pitch
12½˝14˝
Dimensions shown in inches
Optional Light Kit
LK4620**
A
Optional Woven
Cherry or Walnut
Housing Accessory
HA4620CY/WA
Distance from Ceiling
to Bottom of Fan
A
Fan w/6˝downrod 15½˝
Fan w/12˝downrod 21½˝
Fan w/18˝downrod 27½˝
Fan w/24˝downrod 33½˝
Fan w/36˝downrod 45½˝
Fan w/48˝downrod 57½˝
Fan w/60˝downrod 69½˝
Fan w/72˝downrod 81½˝
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 18 motor is designed for optimal performance with this fan.
FAN SPEEDS:
4 fan speeds with reversing switch (on top of the motor). High – 150 rpm; Med High – 115 rpm; Med – 85 rpm; Low – 50 rpm
CONTROL OPTIONS:
The fan-only wall control (CW40) is included. Reversing switch located on fan housing. Installation and operating
instructions provided with control. Optional controls are: C2 wall control, C4 hand-held remote with receiver.
LIGHTING OPTION:
The optional 1-bulb downlight fixture (13 watt, Energy-Efficient CFL bulb included) is available and sold separately.
Maximum downlight wattage not to exceed 13 watts. NOTE: Fan supplied with fan only wall control. Light kit will require
an additional control/switch.
DOWNROD OPTIONS:
The Zonix™fan comes with a 1˝Dia. x 6˝(DR1-6) downrod. Optional downrods are available in 12”, 18”, 24”, 36”, 48”, 60”,
and 72”. For installations requiring a longer downrod, a downrod coupler is available. The Zonix™fan can be mounted
on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer than the standard 6˝downrod.
Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°. Call tech support for more information.
BLADE SETS:
A set of three 26˝reversible (cherry/walnut) wood blades are included. Optional set of three 20˝reversible (cherry/
walnut–B4442CWR) and satin nickel (B4442SN) blades are available and sold separately. Not recommended for Damp
Location.
DAMP LOCATION:
Fan not rated for Damp Location usage.