Fanimation Vetricco FP3120 Series User manual

The Vetricco®
FP3120 Series
SPECIFICATION SHEET
Product Specifications subject to change

A
7´ min
Floor
Ceiling
Blade Sweep
24˝Blade = 60˝
15° Blade Pitch
Net Hanging Weight: 35 lbs
5¾˝dia
16½˝
square 15˝
(w/6˝dr)
12˝
Copyright 2007 Fanimation, Inc. 2007/12
The Vetricco®Fan Assembly – FP3120**
Available Finishes
GB Glossy Black/Chrome Balls
SN Satin Nickel/Chrome Balls
Dimensions shown in inches
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free [phone]
FAX [phone]
Outside U.S. call [phone]
Visit Our Website www.fanimation.com
Distance from Ceiling
to Bottom of Fan A
Fan w/6˝downrod 23˝
Fan w/12˝downrod 29˝
Fan w/18˝downrod 35˝
Fan w/24˝downrod 41˝
Fan w/36˝downrod 53˝
Fan w/48˝downrod 65˝
Fan w/60˝downrod 77˝
Fan w/72˝downrod 89˝
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz version is
available.
FAN SPEEDS:
3 fan speeds with reversing switch (on top of the motor). High – 150 rpm; Med – 115 rpm; Low – 75 rpm
CONTROL OPTIONS:
The hand-held remote control (C26) and canopy-style receiver unit (RECAN68UD) are included. Push button control
with frequency code settings located on both the transmitter and the receiver units. Each push button unit will consist of
3 separate fan speeds, infinite light levels, and off button. Reversing switch located inside fan housing on upper socket
housing. Optional controls are: C2 wall control; C9 wall control used with canopy receiver. Installation and operating
instructions provided with control. Installation and operating instructions provided with control.
LIGHTING OPTIONS:
The 3-bulb (40 watt max) uplight and 3-bulb (40 watt max) downlight fixtures are included with this fan assembly with a
maximum of 240 watts (candelabra bulbs - not included). Maximum uplight and downlight wattage not to exceed 240
watts.
DOWN ROD OPTIONS:
The Vetricco®fan comes with a standard 6˝down rod. Optional down rods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝,
and 72”. For installations requiring a longer down rod, a down rod coupler is available. The Vetricco®fan can be mounted
on a sloped ceiling up to 30°. Most sloped ceiling installations require a down rod longer than the standard 6˝down rod.
Optional sloped ceiling ball kits (SCB52) are available for up to 52°. Call tech support for more information.
BLADE SETS:
A set of 3 plastic blades are included with this fan.
DAMP LOCATION:
Fan not rated for Damp Location usage.