Fanmaster PACIMD-PA User manual

PORTABLE EVAPORATIVE AIR COOLER - MULTI DIRECTIONAL
D.I.Y assemble kit #PACIMD-PA
FA NM A ST E R
cooling heating ventilation extraction
ASSEMBLY INSTRUCTIONS

WHAT’S INCLUDED
PART QTY IMAGE
Air outlet assembly
8 x top panels
8 x support brackets
4 x bottom panels
32 x louvres
1 x fan guard
1
Body 1
Castors
(located inside body) 4
PopRivets/Screws/
Accessories
(located inside body)
Control Panel +
Enclosure
(located inside body) 1
Remote Control
(located inside body) 1
Instruction Manual
(located inside body) 1

TOOLS REQUIRED
• Powered drill with Philips head bit
• Rivet gun (preferably air powered)
VIDEO INSTRUCTION
WATCH ME
PRODUCT INFORMATION
SCAN ME

ASSEMBLY INSTRUCTIONS
1st Stage - Unpack & Locate Accessories Box:
• Remove body from the carton
• Remove side panel (with yellow label) to access inside of body.
• Locate box with castors, instruction manual, control panel, remote & accessories.
RECOMMEND 2 PERSONS FOR ASSEMBLY

2nd Stage - Attachment of Castors
• Place down the carton or blanket on the floor
• Carefully lay the body on its side
• Attach 4 x castors with bolts & washers supplied
• Lock all 4 brake functions and lift unit into upright position.
3rd Stage - Assembly & Attachment of Air Outlet
• Locate 8 x top panels, 8 x support brackets, 4 x bottom panels, 32 x louvres & 1 x fan guard.
Support Brackets
Louvres
Bottom PanelsTop Panels
Fan guard

• Attach the top panels (8) using the pop rivets supplied.

• Attach the support brackets (8) to the top panel using the pop rivets supplied.

• Attach the bottom panels (4) to the support brackets with the pop rivets supplied.
• Install the rubber grommets into the support brackets.
• Attach the louvres (32) into the air vent (8 sections).
Rubber Grommets
Louvres

• Attach air outlet to body with screws provided.
4th Stage - Cabling & Connection:
• Insert control panel into enclosure bracket (locate controller cable which is the front)
• Attach enclosure bracket to body with screws supplied
• Locate cable - controller cable (black)
• Connect controller cable (black) to control panel
• Replace side panel
• Ready to plug and play.
• Attach fan guard to air outlet with pop rivets & washers.