Fanmaster ULV Series User manual

INDUSTRIAL ULV FOGGER SANITISER
INSTRUCTION MANUAL
MODEL: ULVFOG-45 (UF-0045L)

READ & SAVE THESE INSTRUCTIONS
The Fanmaster ULV Fogger Sanitiser (Ultra Low Volume) is a compact
and powerful fogging machine proving 1400 watts of power and with a
4.5L tank capacity. It is designed to handle both oil and water based
chemical solutions and can be used in a variety of applications such
as, used to sterilise and or disinfect the workplace, used for applying
pesticides, herbicides, fungicides, sterilisers, and disinfectant.
•Adjustable Atomisation
•Effective range up to 10m
•Light weight ergonomic design
•Compact & Powerful
•Handles both oil & water based chemical solutions
•Ultra low volume

SAFETY INSTRUCTIONS
Ensure you are wearing the correct Personal Protective
Equipment (PPE) when spraying such as masks, goggles,
gloves, earmuffs.
Always operate the product from a power source of the same
voltage, frequency and rating as indicated on the product
identification plate.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Close supervision is necessary when used near children or infirm
persons. Do not allow children to use it.
Do not operate any product with a damaged cord or plug,
after the product malfunctions, is dropped or appears
damaged in any way. Return the complete product to the
place of purchase for inspection, repair or replacement.
To reduce the risk of electric shock, do not immerse or expose
the product or flexible cord to rain. moisture or any liquid.
This product should not be used in the immediate vicinity of
water, such as sinks, bathtub, washbowls, swimming pool etc.
where the likelihood of immersion or splashing could occur.
Always disconnect the fogger when moving it from one
location to another.
Never attempt to make any modifications to or repair the
product yourself. Have it repaired by a qualified person only.
Manufacturer takes no responsibility for any damage caused
by incorrect use.

SPECIFICATIONS
Part No.
ULVFOG-45 / UF-0045L
Power
1400W
Voltage
220-240V
Plug
3 Pin 10A
Tank Size
4.5L
Lead Length
5m
Atomisation
150-260ml/min (adjustable)
Particle Size
10-150μm
Effective Range
5-10m
Chemical Solution
Oil or Water based
dBa
<75.8
Dimensions
430x270x390mm
Weight
3.5kg
Material
PP corrosion resistant plastic

OPERATION & USE
Do not operate the Fogger for more than 20 minutes at a time.
Make sure the appliance is turned off and not connected to the
power supply before adding the solution.
Please ensure you are wearing the correct Personal Protective
Equipment (PPE) when spraying such as masks, goggles, gloves
1. Add solution (water or oil based) by unscrewing the cap off
the tank and pouring solution into the tank. Screw the cap
back on and ensure it is sealed correctly.
Check the solutions manufactures instruction in terms of portion/mixture
control.
2. Set the adjustable misting knob to Max, once turned on
adjust accordingly.
3. Connect to the power supply.
4. Turn on the switch . (to turn off O)
5. For Sanitisation:
During the spraying operation, the operators walking speed
should be stable, do not run. Slow control is required when
spraying side to side or up and down. Do not spray people or
animals. Stand back 1.5m when spraying near appliances and
do not point and hold directly at appliances.
After use:
Any remaining solution should be poured out and disposed of
correctly. Add water and spray for 2-3 minutes until clean. Store
away.
Troubleshooting:
If not spraying first check the cap on the tank is correctly
sealed. Check if lines are blocked, if so remove and clean.

WARRANTY
Any claim under this warranty must be made within 12 months of the
date of purchase of the product. To make a claim under the warranty,
take the product (with proof of purchase) to the store where you
purchased the product or contact Fanmaster Pty Ltd.
Fanmaster Pty Ltd will pay your reasonable, direct expenses of claiming
under this warranty. You may submit details and proof of your expense
claim to Fanmaster Pty Ltd for consideration.
This warranty is given by Fanmaster Pty Ltd
ABN: 45 353 934 457
Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232
P: 1300 900 345
E: [e-mail]
This warranty is provided in addition to other rights and remedies you
have under law: Our goods come with guarantees which cannot be
excluded under the Australian Consumer Law. You are entitled to
replacement or refund for a major failure and to compensation for
other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Exclusions: This warranty does not cover:
•Any defects caused by an accident, misuse, abuse, improper
installation or operation, lack of reasonable care, unauthorized
modification, loss of parts, tampering or attempted repair by a
person not authorized by the distributor.
•Any product that has not been installed, operated or maintained
to a satisfactory level.
•Any damage caused by improper power input or improper cable
connection.
To make a claim please visit https://www.fanmaster.com.au/warranty-
claims-returns/