Fanmaster IHR4-550-4-3 User manual

MODEL: IHR4-550-4-3, IHR6-11-6-3, IHR6-22-4-3, IHR8-22-6-3
HOODED ROOF EXHAUST FAN
TO PREVENT SERIOUS INJURY, READ & UNDERSTAND ALL WARNINGS &
INSTRUCTIONS BEFORE USE. PLEASE KEEP THIS DOCUMENT FOR YOUR RECORDS
FOR INDUSTRIAL USE ONLY
FA NM A ST E R
cooling heating ventilation extraction
1 year warranty
INSTRUCTION MANUAL

FOR YOUR INFORMATION
Thank you for purchasing a Fanmaster hooded roof exhaust fan. Please read this
instruction manual carefully before using this appliance.
Disclaimer:
Fanmaster reserves the right to make alterations to specications, quantities,
dimensions, for production or other reasons, subsequent to publication.
While we believe the information is accurate and complete, we make no warranty
or representation for any particular purposes. The information is offered in good faith
and with the understanding that any use of the units or accessories in breach of the
directions and warnings in this document is at the sole discretion and risk of the user
Disposal Guidelines:
Do not dispose of this product with general household waste. This product must be
disposed according to the laws governing Waste Electrical and Electronic Equipment.
If required, contact your local authorities for information regarding the available
disposal facilities.

1. GENERAL SAFETY RULES & WARNINGS
• PLEASE READ INSTRUCTIONS CAREFULLY.
• PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW
ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS
APPLIANCE.
• IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION
MAY RESULT IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.
• FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS
APPLIANCE, CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM
HAZARDS OF FIRE, EXPLOSION, BURN, AND/OR ELECTRICAL SHOCK.
• ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR
SERVICE THIS APPLIANCE. IF YOU NEED ASSISTANCE OR REQUIRE INFORMATION SUCH AS AN
INSTRUCTION MANUAL, LABELS, ETC. CONTACT FANMASTER.
• DO NOT ATTEMPT TO MAKE ANY MODIFICATIONS TO OR REPAIR THIS APPLIANCE BY
YOURSELF.
• DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.
• THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH
LOCAL REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED.
• DISCONNECT THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.
• DO NOT LEAVE THE APPLIANCE UNATTENDED WHEN IN USE.
• NEVER USE THE APPLIANCE WITH WET HANDS.
• CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.
• THE APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH
REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE &
KNOWLEDGE.
• DO NOT PUT UNNECESSARY OBJECTS INTO THE AIR OUTLET AS THIS WILL CAUSE DAMANGE TO
THE FAN AND COULD LEAD TO INJURY.
• DO NOT CLIMB UP OR STACK OBJECTS ON THE APPLIANCE.
• DO NOT PLACE BURNING APPARATUS NEAR THE APPLIANCE AS IT MAY CAUSE CARBON
MONOIDE POISONING. PRECAUTIONS MUST BE TAKEN TO AVOID THE BACK FLOW OF GASES
INTO THE OPEN FLUE OF GAS OR OTHER FUEL BURING APPLIANCES.
• DO NOT PLACE THE APPLIANCE CLOSE TO WALLS, CURTAINS AND OTHER MATERIAL AS IT WILL
RESTRICT THE AIR INTAKE.
FOR YOUR INFORMATION

2. PRODUCT DESCRIPTION & SPECIFICATIONS
PRODUCT DESCRIPTION
The Fanmaster Hooded Roof Exhaust Fans extract heater, smoke, dust or fumes from
all types of buildings including factories & warehouses.
SPECIFICATIONS
MODEL IHR4-550-4-3 IHR6-11-6-3 IHR6-22-4-3 IHR8-22-6-3
Air Flow (L/s) 1111 3600 5194 7778
dBa <72 <71 <75 <78
Fan Diameter (mm) 420 620 620 820
Motor (K/W) 0.55 1.1 2.2 2.2
Voltage (V/Hz) 380~415V/50 380~415V/50 380~415V/50 380~415V/50
Current (A) 0.19 2.6 3.06 3.05
RPM 1420 960 1420 960
Total Pressure (PA) 166 176 294 196
IP Rating IP44 IP44 IP44 IP44
Plug Connection Hardwired Hardwired Hardwired Hardwired
Fan Speed 1 1 1 1
Weight (KG) 26 105 110 125
ENVIRONMENT OF USE
1. Ambient temperature: -20°C~ 60°C.
2. The max relative humidity is ≤ 90% Below 1000 metres altitude.

3. INSTALLATION2. PRODUCT DESCRIPTION & SPECIFICATIONS
Remove the appliance from the crate. If the appliance is damaged, please contact
Fanmaster or where you purchased the appliance from.
• A qualied tradespersons is required to install this appliance.
• The appliance must be installed vertically and must be level.
• Prepare an opening in the roof. Depending on roof type, the appliance will
require a relevant mounting upstand in galvanised sheet metal.
• Flashing and/or foam seal tape will be required.
• Secure the appliance with the appropriate fastenings.
• Test run the appliance to ensure free rotation of the blade and vibration free
operation.
• This appliance must be installed by a licensed electrician. All connections must
be in accordance with any local regulations. The licensed electrical installer must
ensure that an approved means of disconnection be incorporated into the xed
wiring.
MODEL DIMENSIONS (mm)
AH h L x L G x G N-K
IHR4-550-4-3 650 550 355 520x520 470x470 4-10 3
IHR6-11-6-3 1000 670 455 900x900 770x770 4-14 3
IHR6-22-4-3 1000 670 455 900x900 770x770 4-14 3
IHR8-22-6-3 1390 750 480 1100x1100 1000x1000 4-14 5

4. TROUBLESHOOTING
ISSUE CAUSES SOLUTION
Unable to turn
on
1. No Power Connection
2. Switch Failure
3. Phase Failure
4. Low voltage
1. Check power supply
2. Replace switch
3. Check phase
4. Check voltage
Excessive
noise
1. Fan blade dirty, deformed or
damaged
2. Motor wear
3. Blockages the outlet
1. Change fan blade or adjust bracket
2. Replace motor
3. Remove objects
5. WIRING DIAGRAM

6. WARRANTY
Any claim under this warranty must be made within 12 months of the date of purchase of the
product. To make a claim under the warranty, take the product (with proof of purchase) to
the store where you purchased the product or go to https://www.fanmaster.com.au/support.
This warranty is given by Fanmaster Pty Ltd
ABN: 45 353 934 457
Unit 1/6-8 Yalgar Rd, KIRRAWEE NSW 2232
P: 1300 900 345
E: [email protected]
This warranty is provided in addition to other rights and remedies you have under law: Our
goods come with guarantees which cannot be excluded under the Australian Consumer Law.
You are entitled to replacement or refund for a major failure and to compensation for other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Exclusions: This warranty does not cover:
• Any defects caused by an accident, misuse, abuse, improper installation or operation,
lack of reasonable care, unauthorized modication, loss of parts, tampering or attempted
repair by a person not authorized by the distributor.
• Any product that has not been installed, operated or maintained to a satisfactory level.
• Any damage caused by improper power input or improper cable connection.
Register Your Product
REGISTER
www.fanmaster.com.au/warranty-registration
> Warranty Management
Validate your warranty, and receive notication 14 days prior to expiration.
> Warranty Extension Available
Add extended warranty to give you peace of mind.
> Product Updates
Latest news and updates on Fanmaster products.
7. WARRANTY VALIDATION

N11664
MADE IN CHINA
Fanmaster Pty Ltd | 1/6-8 Yalgar Road, KIRRAWEE NSW 2232
1300 900 345 | [email protected] | www.fanmaster.com.au
FA NM A ST E R
cooling heating ventilation extraction