Fast Metal Speed Demon User manual

Speed Demon
Pioneer
Shifter
and their Hybrid Versions
HIGH PERFORMANCE PROTECTIVE EYEWEAR

Introduction
Eyewear Components
Lens Replacement
Lens Removal
Lens Installation
Fit Adjustment
Care & Maintenance
Limited Warranty
1
2
4
4
6
8
10
12
CONTENTS

Thank you for your purchase of the Fast Metal Speed Demon, Pioneer or Shifter eyewear protection system. This manual
covers three of our American-Made models: Speed Demon, Pioneer, Shifter, and their hybrid variants.
These lifestyle products provide many options to interchange lenses within seconds and the ability to replace them
when needed. They were designed for people with active lifestyles who engage in motorcycle riding, sky diving, military,
law enforcement and other fast moving activities done while wearing eyewear. These high performance glasses exceed
ANSI-Z87.1-2015 for impact resistance and optical clarity. With proper maintenance and care these models will deliver
performance and protection in harsh conditions. Furthermore, these models offer optional foam inserts that help keep wind
and dust from entering the eye socket.
Fast Metal brings 25 years of experience and knowledge into developing a newer concept of the aluminum sunglass frame
interchangeable lens system. This system was developed by Fast Metal’s founder, Ken Wilson, also known as the Originator
of aluminum eyewear. Ken is the pioneer of the aluminum eyewear market who invented and patented the first ever 27 step
procedure to manufacture aluminum sunglass frames in the USA back in 1995.
1

2
Speed Demon and Pioneer, or Shifter
frames with interchangeable lenses (Speed Demon model shown)
The Pioneer model is designed
for smaller faces.
The Speed Demon and Shifter
models fit larger faces.
EYEWEAR COMPONENTS

Microfiber Pouch
3
Scan the code below
to go to our Lens Page

4
WARNING:
Lenses can only be changed using these instructions
for the Speed Demon, Pioneer, or Shifter models.
Other models made by Fast Metal may not offer
the same technique.
LENS REPLACEMENT
LENS REMOVAL
1. Place index finger of one hand
onto the bridge of the frame and
place the thumb of same hand on
top of the frame as shown.
Scan the code below to see
our Lens Replacement Video

5
2. Flex nose bridge with index finger
towards you while pushing the inside edge
of the lens out with the thumb as shown.
3. Using your thumb, push the lens
out of its groove from the back.

6
LENS INSTALLATION
1. Hold frame and lens as shown and trail
outside edge of the lens into the lens groove,
pushing all the way to the back edge firm.
LENS REPLACEMENT
(CONTINUED)
Scan the code below to see
our Lens Replacement Video

3. Work your way around the edges until all
four corners of the lens are firmly snapped into
the frame.
7
2. Use your thumbs to apply pressure around the
outside edge of the lens until you hear it pop into
groove. Make sure the lens is pressed in the back
leaving no slack.

FRAME ADJUSTMENT
If your Fast Metal glasses feel too tight around your
ears, your primary adjustment should be to the front
frame. Hold the frame in both hands and carefully
flex the frame outward gently. Make a number of
small adjustments checking the fit each time to
see if the desired fit has been achieved. Use Caution:
Bending the frames too much or too quickly can
result in dislodging of the lenses or distortion of the frame.
WARNING:
Do not attempt this
on plastic frames
FIT ADJUSTMENT
8
Scan the code to see our
Frame Adjustment Video

TEMPLE ADJUSTMENT
If needed, a second adjustment can be
made to the narrow end of the eyewear temples.
Gently grasp each side temple with one hand
and make slight adjustments, checking for
desired fit and comfort each time. Make similar
adjustments to each side to preserve symmetry.
9
Scan the code to see our
Frame Adjustment Video

10
CARE & MAINTENANCE
Fast Metal Speed Demon, Pioneer, and Shifter models come with a specially-woven Microfiber
pouch for cleaning and storing. Using the soft bag will help preserve the superior optical quality of
your Fast Metal lenses. Hand wash and air dry the bag regularly.
When not in use, always carry your eyewear in the provided bag or other sturdy eyewear case.
To keep them in shape, use both hands to take them off and avoid putting them face down on
a surface, as scratches can impede the performance or ruin your lenses.

11
To avoid scratches, never wipe the lenses when they are dry (there may be dust or particles).
Always use a microfiber cloth. Never use paper towels or other rough materials.
Check your Fast Metal Speed Demon, Pioneer, or Shifter protective eyewear regularly to make
sure the screws are tight. If you find one that is loose, tighten it gently with a small optical
screwdriver. A 2.0mm screwdriver is recommended. Also, if your hinges are binding, use a
little oil on the barrels to free them.

12
Fast Metal warranties the Speed Demon, Pioneer, and Shifter models up to 1 year from date of purchase for workmanship and defects.
This warranty does not cover scratched lenses. Fast Metal does not warranty scratched lenses or damage resulting from improper
care or excessive size adjustments. If you believe your product has a defective lens, notify us immediately for options on how to repair
or replace. If you have issues with your frame, contact us for warranty repairs and service. If your frame is accidentally broken and
not covered as a defect, we will offer you a minimum charge to repair or replace your product. We reserve the right to determine in
our sole discrection if a product has been mishandled or abused. However, you will not be turned away without Fast Metal offering a
solution to replace or repair your glasses for a minimum cost. Our intention is to keep you happy and keep you as a customer. Customer
satisfaction is our number one goal.
EXCEPT WHERE PROHIBITED BY LAW, THE WARRANTY DESCRIBED ABOVE CONSTITUTES THE SOLE WARRANTY MADE BY FAST
METAL LLC EITHER EXPRES OR IMPLIED. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THOSE
OUTLINED HEREIN, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL FAST METAL LLC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGE EVEN IF ADVISED OF THE
POTENTIAL FOR SUCH DAMAGES, AND THE USER, ITS AGENTS, EMPLOYEES, OR CUSTOMERS REMEDIES SHALL BE LIMITED SOLELY
TO THE REPAIR OF REPLACEMENT OF THE NONCONFORMING UNITS OR PARTS,WHICH AMOUNT SHALL NOT EXCEED THE TOTAL
PURCHASE PRICE OF THE PRODUCT UNDER WARRANTY.
LIMITED WARRANTY

13
Any tampering, misuse or negligence in handling or use of the product renders the warranty void. Further, the warranty is void
if at any time, the user, its agents, employees, or customers attempts to make any internal changes to any of the components
of a product: If at any time the power supplied to any part of the product exceeds the rated tolerances: if any external device
attached by the user, its agents, employees or customers creates conditions exceeding the tolerances of the product:
OPERATION OF THE PRODUCT RENDERS THAT RENDERS THIS WARRANTY VOID WILL BE DEFINED TO INCLUDE ALL OF THE
POSSIBILITIES DESCRIBED IN THIS SECTION, TOGETHER WITH ANY PRACTICE THAT RESULTS IN CONDITIONS EXCEEDING
THE DESIGN TOLERANCE OF THE PRODUCTS.
The warranty will be void if the product is purchased from an unauthorized source.
WARNING!
This product can expose you to chemicals including Bisphenol-A (BpA), Chromium and Nickel which are known to the State
of California to cause cancer (Nickel and Chromium) and birth defects or other reproductive harm (BpA and Chromium).
For more information go to www. P65Warnings.ca.gov.

Visit us at www.FastMetal.com or follow us on Facebook, Instagram and Twitter. Fast Metal is a registered trademark.
Email: [email protected] • U.S. Patents # 11,002,988, D898,093, D916,947, and other patents pending.
Version: 6.2021