Fayat Group BOMAG BRP 35/60 D Instructions for use

BPR 35/60 D
Reversible vibratory plate
Operating Instruction
Maintenance Instruction
Original Operating Instructions
S/N 101 695 24 1001>
© 03/2019008 204 48 EN
www.discount-equipment.com
Go to Discount-Equipment.com to order your parts

Discount-Equipment.com is your online resource for quality parts & equipment.
Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101
Need parts?
Click on this link: http://www.discount-equipment.com/category/5443-parts/ and
choose one of the options to help get the right parts and equipment you are looking
for. Please have the machine model and serial number available in order to help us
get you the correct parts. If you don’t find the part on the website or on one of the
online manuals, please fill out the request form and one of our experienced staff
members will get back to you with a quote for the right part that your machine needs.
We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,
Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,
Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,
Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic,
Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,
Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.
Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin,
Rice, CH&E, General Equipment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent,
Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air,
APT, Wylie, Ingersoll Rand / Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith
Surface Prep,Small Line, Wanco, Yanmar

terminals, tank trucks and other facilities and equipment.
plants, transport and storage operations such as pipelines, marine
For more information go to www.P65Warnings.ca.gov/petroleum.
These exposures can occur in and around oil fields, refineries, chemical
WARNING: Crude oil, gasoline, diesel fuel and other petroleum
products can expose you to chemicals including toluene and benzene,
which are known to the State of California to cause cancer and birth
defects or other reproductive harm.
WARNING: Breathing diesel engine exhaust exposes you to chemicals
known to the State of California to cause cancer and birth defects or other
reproductive harm.
Always start and operate the engine in a well-ventilated area.
If in an enclosed area, vent the exhaust to the outside.
Do not modify or tamper with the exhaust system.
Do not idle the engine except as necessary.
For more information go to www.P65warnings.ca.gov/diesel.
2
Go to Discount-Equipment.com to order your parts

Table of contents
1Introduction........................................................................................................................................... 7
1.1 Foreword........................................................................................................................................ 8
1.2 Machine type plate and engine type plate................................................................................ 10
2 Technical data...................................................................................................................................... 11
2.1 Noise and vibration data............................................................................................................ 14
2.1.1 Noise data.................................................................................................................................. 14
2.1.2 Vibration data............................................................................................................................. 14
3 Concerning your safety...................................................................................................................... 15
3.1 Basic prerequisites..................................................................................................................... 16
3.1.1 General...................................................................................................................................... 16
3.1.2 Explanation of signal words used:.............................................................................................. 16
3.1.3 Personal protective equipment................................................................................................... 17
3.1.4 Intended use.............................................................................................................................. 18
3.1.5 Improper use.............................................................................................................................. 18
3.1.6 Estimated service life of the machine......................................................................................... 19
3.2 Definition of responsible persons............................................................................................. 20
3.2.1 Operating company.................................................................................................................... 20
3.2.2 Expert / qualified person............................................................................................................ 20
3.2.3 Driver / operator......................................................................................................................... 20
3.3 Basic safety regulations for safe operation............................................................................. 22
3.3.1 Remaining dangers, remaining risks.......................................................................................... 22
3.3.2 Regular safety inspections......................................................................................................... 22
3.3.3 Modifications and alterations to the machine............................................................................. 22
3.3.4 Damage, defects, misuse of safety devices............................................................................... 22
3.4 Handling fuels and lubricants.................................................................................................... 23
3.4.1 Preliminary remarks................................................................................................................... 23
3.4.2 Safety regulations and environmental protection regulations for handling diesel fuel............... 24
3.4.3 Safety regulations and environmental protection regulations for handling oil............................ 25
3.4.4 Safety regulations and environmental protection regulations for handling hydraulic oil............. 26
3.4.5 Safety regulations and environmental protection regulations for handling battery acid............. 27
3.5 Loading/transporting the machine............................................................................................ 28
3.6 Start-up procedure...................................................................................................................... 29
3.6.1 Prior to starting up...................................................................................................................... 29
3.6.2 Starting the engine..................................................................................................................... 29
3.7 Working operation...................................................................................................................... 30
3.7.1 Persons in the danger area........................................................................................................ 30
3.7.2 Operation................................................................................................................................... 30
3.7.3 Parking the machine.................................................................................................................. 30
3.8 Refuelling..................................................................................................................................... 31
3.9 Maintenance work....................................................................................................................... 32
3.9.1 Preliminary remarks................................................................................................................... 32
3.9.2 Working on the engine............................................................................................................... 32
3.9.3 Maintenance work on electric components and battery............................................................. 32
3.9.4 Cleaning work............................................................................................................................ 32
Table of contents
BPR 35/60 D
3
Go to Discount-Equipment.com to order your parts

3.9.5 Measures for longer shut-down periods..................................................................................... 33
3.9.6 After maintenance work............................................................................................................. 33
3.10 Repair......................................................................................................................................... 34
3.11 Signage...................................................................................................................................... 35
3.12 Safety components................................................................................................................... 39
4 Indicators and control elements........................................................................................................ 41
5 Checks prior to start up...................................................................................................................... 43
5.1 Notes on safety........................................................................................................................... 44
5.2 Visual inspections and function tests....................................................................................... 45
5.3 Checking the engine oil level..................................................................................................... 46
5.4 Checking the fuel level; topping up fuel................................................................................... 47
5.5 Checking the rubber buffers...................................................................................................... 48
6 Operation............................................................................................................................................. 49
6.1 Folding down the steering rod................................................................................................... 50
6.2 Starting the engine...................................................................................................................... 51
6.3 Operation..................................................................................................................................... 53
6.4 Parking the machine in secured condition............................................................................... 55
7 Loading / transporting the machine.................................................................................................. 57
7.1 Loading the machine.................................................................................................................. 58
7.2 Lashing the machine to the transport vehicle.......................................................................... 60
7.3 Transport wheels......................................................................................................................... 61
8 Maintenance........................................................................................................................................ 63
8.1 Preliminary remarks and safety notes...................................................................................... 64
8.2 Preparations/concluding work................................................................................................... 65
8.2.1 Opening the protection hood...................................................................................................... 65
8.3 Fuels and lubricants................................................................................................................... 66
8.3.1 Engine oil................................................................................................................................... 66
8.3.2 Fuel............................................................................................................................................ 66
8.3.3 Oil for exciter shaft housing........................................................................................................ 67
8.3.4 Mineral oil based hydraulic oil.................................................................................................... 67
8.4 List of fuels and lubricants........................................................................................................ 69
8.5 Running-in instructions.............................................................................................................. 70
8.5.1 General...................................................................................................................................... 70
8.5.2 After 25 operating hours............................................................................................................. 70
8.6 Maintenance Table...................................................................................................................... 71
8.7 Weekly.......................................................................................................................................... 72
8.7.1 Checking, cleaning the air filter.................................................................................................. 72
8.7.2 Checking and cleaning the water separator............................................................................... 74
8.8 Semi-annually.............................................................................................................................. 75
8.8.1 Battery service........................................................................................................................... 75
8.9 Annually....................................................................................................................................... 77
8.9.1 Changing the engine oil and cleaning the oil filter...................................................................... 77
8.9.2 Changing the oil in the exciter housing...................................................................................... 79
8.9.3 Replacing the air filter................................................................................................................ 80
8.9.4 Replacing the fuel filter............................................................................................................... 81
Table of contents
BPR 35/60 D
4
Go to Discount-Equipment.com to order your parts

8.9.5 Replacing the V-belt................................................................................................................... 82
8.9.6 Checking, adjusting the valve clearance.................................................................................... 84
8.9.7 Replacing the starter rope.......................................................................................................... 86
8.9.8 Checking the hydraulic oil level.................................................................................................. 88
8.10 Every 2 years/every 500 operating hours............................................................................... 91
8.10.1 Changing the hydraulic oil........................................................................................................ 91
8.11 As required................................................................................................................................ 94
8.11.1 Cleaning the cooling fins and the cooling air intake openings.................................................. 94
8.11.2 Cleaning the machine............................................................................................................... 94
8.11.3 Servicing the V-belt.................................................................................................................. 95
8.11.4 Checking the oil level in the exciter housing............................................................................ 96
8.11.5 Measures prior to extended shut-down period......................................................................... 96
9 Troubleshooting.................................................................................................................................. 99
9.1 Preliminary remarks.................................................................................................................. 100
9.2 Starting the engine with the recoil starter.............................................................................. 101
9.3 Starting the engine with jump leads........................................................................................ 104
9.4 Fuse assignment....................................................................................................................... 105
9.5 Engine faults.............................................................................................................................. 106
9.6 Malfunctions during operation................................................................................................ 108
10 Disposal............................................................................................................................................. 109
10.1 Final shut-down of machine................................................................................................... 110
11 List of special tools........................................................................................................................... 111
Table of contents
BPR 35/60 D
5
Go to Discount-Equipment.com to order your parts

1 Introduction
Introduction
BPR 35/60 D
7
Go to Discount-Equipment.com to order your parts

1.1 Foreword
BOMAG manufactures machines for earth, asphalt and refuse
compaction, stabilizers/recyclers as well as planers and
pavers.
BOMAG’s vast experience in connection with state-of-the-art
production and testing methods, such as lifetime tests of all
important components and highest quality demands guar-
antee maximum reliability of your machine.
These operating and maintenance instructions are part of your
machine.
They provide necessary information to operate your machine
safely and properly.
They also contain information on required operating, maintenance
and repair measures.
Carefully read the operating and maintenance instructions before
taking your machine into operation.
Please observe the safety regulations strictly and follow all instruc-
tions to ensure safe operation.
If you are not yet acquainted with the controls and indicating ele-
ments on this machine, you should thoroughly read the corre-
sponding chapter
Ä Chapter 4 ‘Indicators and control elements’
on page 41.
The description of the individual operating steps including the
notes on safety to be followed can be found in chapter “Operation”
Ä Chapter 6 ‘Operation’ on page 49.
Before every start up, carry out all required visual inspections and
function tests
Ä Chapter 5 ‘Checks prior to start up’ on page 43.
Ensure the compliance with the specified operating, maintenance
and repair measures to maintain the functional safety of your
machine.
A description of all necessary maintenance work, maintenance
intervals as well as information on fuels and lubricants can be
found in the chapter “Maintenance”
Ä Chapter 8 ‘Maintenance’
on page 63.
Do not service or repair your machine by yourself to avoid harming
persons or damaging material or environment.
The machine must only be serviced and repaired by qualified and
authorized personnel.
Contact our Customer Service to carry out the required mainte-
nance work or necessary repairs.
In case of operating errors, inadequate maintenance or the use of
unapproved fuels and lubricants all warranty claims will become
null and void.
For your own personal safety you should only use original parts
from BOMAG.
For your machine we offer service kits to make maintenance
easier.
Introduction – Foreword
BPR 35/60 D
8
Go to Discount-Equipment.com to order your parts

In the course of technical development we reserve the right for
technical modifications without prior notification.
These operating and maintenance instructions are also available in
other languages.
Apart from that, you can also order the spare parts catalogue
against the serial number of your machine.
The above notes do not constitute an extension of the warranty
and liability conditions specified in the general sales and delivery
conditions of BOMAG GmbH.
We wish you successful work with your BOMAG machine.
Introduction – Foreword
BPR 35/60 D
9
Go to Discount-Equipment.com to order your parts

1.2 Machine type plate and engine type plate
Please enter here:
Machine type (1):
Serial number (2):
Please enter here:
Engine type (1):
Engine number (2):
Made by
Designation Type
Nominal Power Operating Mass Year of Construction
Serial-No.
Patent Protection
56154 Boppard;GERMANY Made in Germany
1
2
B-DEC-0270
Fig. 1: Machine type plate (example)
EMISSION CONTROL INFORMATION
MOTORENFABRIK HATZ KG ¬ D-94099 RUHSTORF
GMBH
+CO
Model:
S/N:
Power:
Displ:
Eng.Fam:
Emission Control System:
Power Category:
ULTRA LOW SULFUR DIESEL FUEL ONLY.
FOR MY2018 NONROAD DIESEL ENGINES.
EU-Type:
www.hatz-diesel.com
Build:
PV:
E1
1
2
B-HAT-0045
Fig. 2
Introduction – Machine type plate and engine type plate
BPR 35/60 D
10
Go to Discount-Equipment.com to order your parts