FEITIAN ePayPOS600 Reference manual














ePayPOS600Introduction









V1.0
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
ii
Content
Chapter1.ePayPOS600ProductIntroduction....................................................................................................i
1.1ProductIntroduction........................................................................................................................................i
1.2ProductAppearance........................................................................................................................................i
1.3Specifications..................................................................................................................................................ii
1.3.1Dimensions.....................................................................................................................................................................ii
1.3.2Keypad............................................................................................................................................................................ii
1.3.3Screen............................................................................................................................................................................iii
1.3.4CommunicationInterface..............................................................................................................................................iii
1.3.5BatteryandPowerSource.............................................................................................................................................iii
1.3.6Buzzer............................................................................................................................................................................iii
1.3.7ContactICcardReader..................................................................................................................................................iii
1.3.8ContactlessICCardReader............................................................................................................................................iii
1.3.9MagneticStripeCardReader.........................................................................................................................................iii
1.3.10LEDIndicators..............................................................................................................................................................iv
1.3.11Features.......................................................................................................................................................................iv
1.4Certifications..................................................................................................................................................iv
1.5Compatibility .............................................................................................................................................iv
1.6Installation.....................................................................................................................................................iv
1.7FCCStatement.............................................................................................................................................viii

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
i
Chapter1.ePayPOS600ProductIntroduction
1.1 ProductIntroduction
Feitiane Pay POS600 is am POS product with PCIPTS4.1certification.It has a stylish and tiny design.Connect with
smart phone or tabletvia Bluetooth interface,you can easily and quickly complete thepayment process.It can a
chieve payment progress any time any where which provide send users with a newexperience ofpayment.
This product uses a brand new software structure,user can deployapplications directly on the phoneor
tablet and other intelligentter minals,rapid application development,simple deployment and easy to
extend.Application canbeupgraded remotely,lower the followingcostofdevelopment and maintenance.
Thefeaturesofthisproduct:
Compact
The appearance is compactand portable,suitable for mobile use.
Powerful
Support magnetic stripe card,contact card and contact less card.Support Micro USB and Bluetooth.
SupportiOS/Android/Windowssystem.
Certified
PCI4.1,EMVL1&L2,PayPass,PayWavecertified
Remoteupgrading
Firmware can be upgraded remotely,reducingthe costoflate development and maintenance.
1.2 ProductAppearance
TheePayPOS600 product appearanceis shownas follows:

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
ii
Figure1ePayPOS600appearancefigure
1.3 Specifications
1.3.1 Dimensions
59mm(W)x12.4mm(H)x113.6mm(L)
1.3.2 Keypad
ePayPOS600hasanbuilt‐inpasswordkeyboard,thekeysaredescribedinthefollowingtable.
Table1ePayPOS600keyboard
NameDescription
0~9NumberKeys1. Toinputnumbersfrom0to 9,amount,password,etc
2. Thenumberkeys2,8,4,6respectivelyforup,down,left,right
**menu
##menu
<functionmenu

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
iii
XTocancelcurrentoperation
OKToconfirmcurrentoperation
1.3.3 Screen
Uses 128x64LCDwith backlight,supportsboth Chinese and English.
1.3.4 CommunicationInterface
MicroUSB
When the device is connected to the host(forexample,PC) through this interface,this
interfaceprovides twofunctions such as chargingand data transfer.
Bluetooth 4.2
This device can be connected to smartphone or tablet through thisinterface.
1.3.5 BatteryandPowerSource
Built‐inrechargeable(through MicroUSB) lithium battery,500mAh/3.7V,with charge protection.
1.3.6 Buzzer
Notify the user by beeping whenneeded.
1.3.7 ContactICcardReader
Support contact IC card(ISO/IEC7816‐1/2/3/4ChipCard),TypeA/B/C.When inserting the
ICcard,please let the chipside to ward the sideof the screen.
1.3.8 ContactlessICCardReader
Supprt contactlessIC card(ISO/IEC14443TypeA,ISO/IEC14443TypeB,working frequency 13.56MHz)
1.3.9 MagneticStripeCardReader
The magnetic stripe card must be compliant withISO7812standard.The magnetic strip card
reader canread data from magnetic track1,2,3 at the same time,support bi‐directional swipe,swipe
speed rangesfrom10mm/s to100mm/s.The life cycle isover300,000times.Themagneticstripe must
bebackward whenswiping card.

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
iv
1.3.10 LEDIndicators
TheePayPOS600comeswithfourLEDindicators,respectively,red,green,yellowandblue.
1.3.11 Features
 Tamper‐proofandanti‐power‐downprotection;
 SupportDUKPTkeysystems
 RSA、AES、3DES、SHA‐1、SHA‐256；SupportRSA,AES,3DES,SHA‐1,SHA‐256
 SupportSM2,SM3,SM4
 Physicaltamper‐proofhasself‐destructionfunction;
  Supportred evelopment;
1.4 Certifications
 PCIPTS4.1certified;
 EMVL1/L2;
 EMVContactlessL1;
 PBOC3.0L1/L2;
 MasterCardPayPass;
 VisaPayWave;
1.5 Compatibility 
iOS6.0orlater;
Android4.3orlater;
WindowsXPorlate
1.6 Installation
Step1.Chargingthedevice
•InserttheUSBchargingcableintothemicro‐USBsocketatthebottomendofthedevice.
•ConnecttheotherendoftheUSBchargingcableintoapoweredUSBsocket.
• Achargingsymbolwillappearoverthebatterysymbolinthetoprighthandcornerofthedeviceduring

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
v
charging.
•Chargingofthebatterywilltypicallytakebetween2and4hours,whilstnotinuse.
•Batteryconditionisindicatedinthedisplaywhenthedeviceisswitchedon.
•Theterminalisfittedwithaninternalrechargeablebatterywhichcannotberemovedorreplaced.This
batteryshouldbechargedforatleast3hourswhenusingtheterminalforthefirsttime.Itisrecommendedthat
thebatteryischargedtoatleast40%ofitscapacityevery4months.
Step2.Turningonthedevice
•Holddownthepowerbuttonuntilthedisplayilluminates.
•Ifrequired,removetheprotectivefilmfromthedisplay.
Step3.Mobilepaymentapplicationandpairing
Pleasefollowtheinstructionsprovidedbyyourbankorserviceprovidertodownloadthemobileapplication
ontoyourmobiledeviceandtopairitwiththeSPm3.
Step4.PerformingachipcardsaletransactionwithPIN
•Whenprompted,insertthecustomer’schipcardintotheslotattherighthandsideofthedevicewiththe
chipfacingupwards.
•Followtheinstructionsprovidedbyyourbankorserviceprovidertocompletethetransaction.
Step5.Performingamagneticstripetransaction
•Duringdeviceoperationyoumaybepromptedtoreadapresentedcardbymeansofthemagneticstripe.
•Themagneticstripereaderisaslotpositionedonthetopofthedevice.Swipethecardinasinglesmooth
motionfromlefttoright.
•Followtheinstructionsprovidedbyyourbankorserviceprovidertocompletethetransaction.
Step6.Performingacontactlesstransaction
•Transactionsmaybecompletedusingacontactlesscardorenabledproduct.Thedevicewilldisplaythe

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
vi
contactlesssymbolonthedisplay.
•Toreadacontactlesscarditmustbepositionedincloseproximitytothedeviceoverthecontactlesssymbol.
OncedetectedthefourLEDsatthetopofthedevicewillgogreenandtherewillbeaconfirmationbeep.
•Followtheinstructionsprovidedbyyourbankorserviceprovidertocompletethetransaction
Troubleshooting
Intheunlikelyeventyouexperienceissueswiththisproduct,pleasefollowtheguidelinesbelow.Ifthisdoes
notresolvetheissue,pleasevisitwww.spirepayments.comoryoursolutionproviderforfurtherassistance.
Nodisplay
•ChargethedevicewiththesuppliedUSBcable.
•EnsuretheUSBsocketbeingusedispowered.
Poorbatterylife
•Ensurethepowerisbeingsuppliedduringcharging.
•Checkbatterychargeindicatorisatmaximum
•Chargefor2to4hourstoensureafullchargewhilstnotinuse.
Pairingproblems
•Refertopairinginstructions.
CannotreadCards
•Ensurethemagneticstripecardhasbeenswipedinthecorrectorientation.
•Ensurethechipcardhasbeeninsertedinthecorrectorientation.
•Checkthecontactlesssymbolisonthedevicedisplay.Ensurethecontactlesscardhasbeenplacedata
distanceof0to4cmfromthedevicedisplay.
•Testwithanothercardofthesametype.

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
vii
CautionandSafetyInstructions
•Donotattempttodisassemble,modify,serviceorrepairanypart.
•Donotuseifdamagedorwithsignsoftampering.
•Onlyusethedevicewithsuppliedormanufacturer‐certifiedaccessories.
•Toavoidthepotentialhazardofelectricalshockdonotuseinwetenvironmentsorduringanelectrical
storm.
•Donotuseinproximityofpotentiallyflammablegasesorsubstances.
•Ensurecablesuseddonotcauseatriphazardorriskthedevicebeingdroppedontoahardsurface.
•Donotexposetoexcessiveheatorcold.Onlyoperatebetween0°Cand40°C.
•Beforecleaning,disconnectfromtheelectricaloutlet.Useonlyadryordampenedsoftcloth.
•Donotimmerse,useliquids,spraysoraerosolcleaners.Cleanallspillagesquickly.
•Thisdeviceisintendedforhandhelduseonlyorinanapprovedcradle/stand.
•Disposeanypartinanenvironmentallysoundmannerandinaccordancewithlocallaws.
•SpirePaymentswillnotbeheldliableforanydamageresultingfromuseroperationthatdoesnotcomply
withtheabove‐statedguidance.
•Ifthedevicewillbestored/unusedforextendedperiodsoftime,thenitisimperativethatthebatterybe
rechargedeverysixmonthsorsoonertoatleast30–40%ofmaximumchargewhiletheterminalisin‘OFF’
position.
•OnlyoperatetheResetbuttonifthescreenisunresponsiveorfrozenanddoesnotreacttoholdingdown
thepoweron/offkey
Frequencybands
•Maximumradiofrequencypowertransmittedinthefrequencybandsinwhichthisradioequipment
operatesisbelowthelimitvaluesspecifiedinthecorrespondingHarmonizedStandards.
•Thefrequencybandsandpeak powerapplicabletothisradioequipmentare:Bluetooth:2.402GHz–2.480GHz
,0dBm;NFC:13.56MHz.

ePayPOS600 Introduction
FeitianTech nolo gies Co.,Ltd.
www.FTsafe.com
viii
1.7 FCCStatement
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The device
can be used in portable exposure condition without restriction.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device,pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.