Fellowes Proteus 125 User manual

fellowes.com
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600
Australia China France Korea Singapore
Benelux Deutschland Italia Polska United Kingdom
Canada España Japan Russia United States
Heavy Duty Laminator
Please read these instructions before use.
Veuillez lire ces instructions avant l’utilisation.
Lea estas instrucciones antes del usarlo.
E
F
S

ENGLISH 3-8
FRANCAIS 9-14
ESPAÑOL 15-20
INDEX

3
CAPABILITIES
-Themachineisforindooruseonly.Plugthemachineintoaneasilyaccessiblesocket.
-Topreventelectricalshock-donotusetheapplianceclosetowater,donotspillwaterontotheappliance,powercordorwallsocket.
DOensurethemachineisonastablesurface.
DOtestlaminatescrapsheetsandsetthemachinebeforefinallaminations.
DOremovestaplesandothermetalarticlespriortolaminating.
DOkeepthemachineawayfromheatandwatersources.
DOturnoffthemachineaftereachuse.
DOunplugthemachinewhennotinuseforanextendedperiod.
DOusepouchesdesignedforuseattheappropriatesettings.
DOkeepawayfrompets,whileinuse.
DOensureself-adhesivepouchesareonlyusedwiththecoldsetting.
DO NOTleavethepowercordincontactwithhotsurfaces.
DO NOTleavepowercordhangingfromcupboardsorshelves.
DO NOTuseapplianceifthepowercordisdamaged.
DO NOTattempttoopenorotherwiserepairthemachine.
DO NOTexceedthemachinesquotedperformance.
DO NOTallowchildrentousethismachinewithoutadultsupervision.
DO NOTlaminatesharpormetalobjects(eg:staples,paperclips).
DO NOTlaminateheat-sensitivedocuments(eg:tickets,ultrasoundsetc)on
hotsettings.
DO NOTlaminatewithself-adhesivepouchesonhotsettings.
DO NOTlaminateanemptypouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
• Alwaysputitemintotheappropriatesizedpouch.
• Alwaystestlaminatewithasimilarsizeandthicknessbeforefinal
process.
• Ifrequired,trimexcessmaterialfromaroundtheitemafterlamina-
tionandcooling.
• Forbestresults,useFellowes®brandpouches:
3Mil,5Mil,7Mil,10Mil(5Mil-coldpouch)
• Whenworkingwithdifferentpouchthickness’(temperaturesettings)it
isrecommendedtostartfirstwiththethinnestpouches.
• Preparepouchanditemforlamination.Placeitemwithinpouch
centeredandtouchingtheleadingsealededge.Ensurethepouchis
nottoolargefortheitem.
FEATURES & TIPS
Performance Technical Data
Entrywidth 12.5” Voltage/Frequency/Current(Amps) 120VAC,60Hz,5A
Pouchthickness(min) 3mil(perside) Wattage 1000Watts
Pouchthickness(max) 10mil(perside) Dimensions(HxWxD) 23”x12”x6”
Estimatedheat-uptime 3minutes Netweight 33lbs
Cooldowntime 30-60minutes Laminatingcapacity Maxdocumentthickness=0.08”
Laminationspeed Variablespeed(0-37”/min) Minpouch=3mil
Numberofrollers 6 (totalthickness=2x3=6mil)
Readyindication Light Maxpouch=20mil
Reversefunction Yes (totalthickness=2x10=20mil)
Softtouchbuttons+beep Yes
LEDinterface Yes
Photocapable Yes
Carrier-free Yes
Externalcoolingplate Yes
Letourexpertshelpyouwithasolution.
CustomerService...www.fellowes.com
AlwayscallFellowesbeforecontactingyourplaceofpurchase,seetherear
coverforcontactdetails.
NEED HELP?
ENGLISH E

Illuminated user interface
Pouch / document entry
Main fuse location (at rear next to power inlet)
Pouch / document exit
Cooling system vents
On/off switch (at rear)
LAMINATOR CONTROLS
COLD HOT STOP REV
PREHT MOUNT 12
MEAS CARRI 34
DN UP 56
TEMPERATURE
SPEED / MOTOR
UPDN
SPEEDTEMPERATURE
°C
DISPLAY
CARRI
MOUNT
HOT
MEAS
PREHT
COLD
READY
90
5
LED & Status Display Temperature Adjustment
& Function Controls Speed & Motor Controls
4

LED & STATUS DISPLAY
Select“UP”or“DOWN”controlstoadjustthe
rollerlaminatingtemperature.
Manuallyadjusttherollertemperaturesto
suitthethicknessoflaminatingstock.
Selectfunctiontolaminatewith‘MOUNTBOARD’.
Afunctionforlaminatinghardboardmorethan1mm
thickness.Thefunctionselectstemperature130°cand
motorspeed“1”.
Selectfunctionto‘MEASURE’theactual
temperatureofrollers.
Thebuttoncanbepressedanytimeforanim-
mediatereadoutinthetemperaturedisplay.
Selectfunctionfor‘COLD’orno-heatlamination.
Coldlaminationautomaticallyselectstemperatureand
motorspeedof“0”.Ifrollertemperatureisabove60°c,
motorspeedof“2”willoperateuntilrollershavecooled
safely.Thisactionwillpreventheatdamagetothe
rollers.
Selectfunctionforlaminatingwith‘CARRIER’.
Thefunctionforlaminatingpoucheswith
Carriers.Thefunctionselects100°candmotor
speed“2”.
Selectfunctionfor‘PRE-HEAT’.
Pre-Heatcanbeselectedasa‘Stand-By’functionideal
forextendedperiodsofuse.Thefunctionoperatesat
80°candmotorspeed“2”,untilanotherfunctionis
selected.
Selectfunctionfor‘HOT’lamination.Hotlaminationfornormalhotpouchfilms.For3milpouch,themachinewillselect
temperatureof90°candmotorspeedof“5”.Thisisidealfor20lbcopypaperand3milpouch.Forthickerpouches,selectthe
correspondingenginespeedfollowedbytemperatureadjustment.Adjustmenttotemperatureusing“UP”and“DN”buttonsto
suitthethicknessofpaperasrequired.
EG:
10Mil=motorspeed2
7Mil=motorspeed3
5Mil=motorspeed5
3Mil=motorspeed5
5
Indicatesrollertemperature(pre-setandactual). “READY”LEDswitchestoshowtherollertemperatureis
readytolaminate.
Indicatesrunningspeedoftherollers. FunctionLEDdisplaysshowingtheselectedfunctionin
operation.
TEMPERATURE ADJUSTMENT & FUNCTION CONTROLS
SPEED & MOTOR CONTROLS
“STOP”function.
Pressandholdtostoptherollersrunning.Do
notuseforlongperiodsespeciallywhenthe
rollertemperatureisabove90°c.
“Reverse”function.
Pressandholdtoreversetherollers.Thiswillhelp
removemis-fedpouches.
Selectthemotorspeedtosuitthechosenpouchthickness.Thenadjusttemperaturetosuitpaperthicknessifrequired.
EG:
motorspeed1=mountingboard
motorspeed2=10mil(250micron&carriers)
motorspeed3=10,7mil(200,175,150micron)
motorspeed5=5,4,3,mil(125,100,80micron)

Switchthepoweron(locatedattherearofthemachine).Coldlamina-
tionisthedefaultfunctionsettingwhenpowerisswitchedon.
Selectthe“HOT”function.Thetemperaturewillautomaticallyselect
90°c.Therollerswillstartturningwhenthetemperatureisabove60°c.
When“READY”lampison,themachineisreadytostartlaminating.
Selectthemotorspeedbestsuitedtothepouchthickness(seegraphon
machine)EG:3milpouch=motorspeed5/90°c.Themachinewill
automaticallyselecttheoptimumlaminatingtemperature.Laminating
temperaturescanalsobeadjustedmanuallyasrequired.
Ensurethemachineisonastablesurface.
Checkthereisenoughclearspace(min20”)behindthemachineto
allowitemstopassthroughfreely.
Selectthecorrectpowerleadfortheappropriatepowersupply.Fitthe
leadtothemachine(thesocketisattherearofthemachine).
Plugthemachineintoaneasilyaccessiblemainsocket.Switchthe
mainsupplyon.
Ensurethe‘CoolingPlate’isfittedcorrectlywiththegraphics“Top
Side”visible.
6
Coldlaminationisthedefaultfunctionsettingwhenpowerisswitchedon.Coldlaminationcanonlyoperatewhentherollersrunatatemperaturebelow
30°c.Pressthe“MEAS”buttontomeasuretherollertemperature.
4.
5.
1.
2.
3.
BEFORE LAMINATING
STEPS TO COLD LAMINATE
Switchoffthemachineatthewall.Allowthemachinetocool.Theoutsideofthemachinecanbecleanedwithadampcloth.Donotusesolventsorflammable
materialstopolishthemachine.Cleaningsheetscanbeusedwiththemachine.Whenthemachineiswarm–runthesheetsthroughthemachinetocleanany
residueofftherollers.Foroptimumperformance,itisrecommendedthatcleaningsheetsareusedwiththemachineregularly.
STORAGE & CLEANING
Switchthepoweron(locatedattherearofthemachine).
Selectthe“COLD”function.Waitforrollertemperaturetofallbelow
30°c.
When“COLD”&“READY”lampison,selectspeed2or3andlaminate
coldpouches.
1.
2.
3.
Topreservetherollers,donotswitchoffthemachinewhenitishot.
STEPS TO HOT LAMINATE
Select“COLD”function.Themachinewillsettemperatureat0°cand
motorspeedat“2”.Whentherollertemperaturehascooledtobelow
60°c,therollerswillstopautomatically.
Switchoffthepowerusingtheswitchatthebackofthemachine.
Unplugthepowercord.
1.
2.
3.
STEPS TO SWITCH OFF THE MACHINE
1.
2.
3.
4.
REPLACING THE FUSE
Thismachineisfittedwithafuse,locatedbetweenthemainswitchandthemainsocketontherearofthe
machine.Toreplacethefuse:
• Isolatethemachinefromthemainsupply.
• Openthefuseholderwithascrewdriverblade.
• Insertanewfuseintheholderandreplacetheholderintothemachine.
Note:Alwaysusetherecommendedfuse(5Amps)andDONOTreplaceitwithoneofadifferentrating.

THERMAL RE-SET
Themachineissuppliedwithathermalre-setswitch.Theswitchwillactivate
whenthemachinebecomestoohot.Thisconditionshouldnotoccurduring
normaluse.Tore-settheswitch:
• Isolatethemachinefromthemainsupply.
• Safelysupportthemachine-toaccesstheunderside.
• Usingacross-headscrewdriver,openthecoverplate.
• Usingasuitabletool,insertthetoolthroughtheapertureandpressthe
metalswitchuntilitsnapsclosed.Theswitchwillclosecorrectly,onlyifthe
machineiscoolenough.
• Replacethecoverplateandscrews.
• Power-onthemachine.
TROUBLESHOOTING
Problem Possible cause Solution
NopoweronLED Machineisnotswitchedon Switchonmachineatrearnexttopluginletandatthewallsocket
Readylightdoesnotcomeonaftera
longperiod Machineisinahotorhumidarea Movethemachinetoacooleranddryarea
Pouchdoesnotcompletelysealtheitem Itemmaybetoothicktolaminate Passthroughthemachineagain
Temperaturesettingmaybeincorrect Checkpouchthicknessiscorrectlyselectedandpassthroughagain
Pouchhaswavesorbubbles Temperaturesettingmaybeincorrect Checkpouchthicknessiscorrectlyselectedandpassthroughagain
Pouchislostinthemachine Pouchisjammed
Selectreversebuttonandpullouttheitembyhand.Checkcooling
plateiscorrectlypositioned.
Jamming
Pouchwasused‘openend’first
Pouchwasnotcenteredonentry
Pouchwasnotstraightuponentry
Emptypouchwasused
Coolingplatenotfixedcorrectly
Pouchisdamagedafterlamination Damagedrollersoradhesiveonrollers Passcleaningsheetsthroughthemachinetotestandcleanrollers
Temperaturenotincreasing Mainfusefailure Checkandreplace
Powercordnotfittedcorrectly
Curledorburntlaminations Toohot Reducetemperatureorincreasespeed
Softorpoorlamination Toocold Increasetemperatureorreducespeed
Rollersnotrunning Rollerstoocold(<60°c) Waitforrollerstowarm-up
"STOP"buttonmaybepressed Press"MOTOR"or"SPEED"button
Unstablelaminationtemperature Rollerelectricbrushmaybebroken
Contactserviceengineer
CannotselectanyMode Circuitboarderror
Rollersnotrunning&motorisrunning Loosecircuitboltsongear
Excessivenoise Gearswordordamaged
Masterfusekeepsfailing Damagedcircuitboard
7

8
TEMPERATURE CONVERSIONS
Celsius Fahrenheit Celsius Fahrenheit
21 70 66 151
22 72 67 153
23 73 68 154
24 75 69 156
25 77 70 158
26 79 71 160
27 81 72 162
28 82 73 163
29 84 74 165
30 86 75 167
31 88 76 169
32 90 77 171
33 91 78 172
34 93 79 174
35 95 80 176
36 97 81 178
37 99 82 180
38 100 83 181
39 102 84 183
40 104 85 185
41 106 86 187
42 108 87 189
43 109 88 190
44 111 89 192
45 113 90 194
46 115 91 196
47 117 92 198
48 118 93 199
49 120 94 201
50 122 95 203
51 124 96 205
52 126 97 207
53 127 98 208
54 129 99 210
55 131 100 212
56 133 101 214
57 135 102 216
58 136 103 217
59 138 104 219
60 140 105 221
61 142 106 223
62 144 107 225
63 145 108 226
64 147 109 228
65 149 110 230

F
FRANÇAIS
9
CAPACITÉS
-Lamachineestréservéeàunusageàl'intérieur.Brancherlamachinedansunepriseélectriquefacilementaccessible.
-Pourévitertoutrisqued'électrocution-nepasutiliserl'appareilprèsdel'eau,nepasrenverserd'eausurl'appareil,lecordond'alimentationoulaprise
murale.
IL FAUTs'assurerquel'appareilsoitsurunesurfacestable.
IL FAUTfaireunessaideplastificationsurdesfeuillesderebutetajuster
l'appareilavantdeplastifierlesdocumentsfinaux.
IL FAUTenleverlesagrafesetautrespiècesmétalliquesavantdeplastifier.
IL FAUTgarderl'appareilloindetoutessourcesdechaleuretd'eau.
IL FAUTéteindrel'appareilaprèschaqueusage.
IL FAUTdébrancherl'appareilquandiln'estpasutilisépourunepériode
prolongée.
IL FAUTutiliserlespochettesconçuespourl'utilisationavecdesréglages
appropriés.
IL FAUTgarderl'appareilloindesanimauxdomestiquesquandilestutilisé.
IL FAUTs'assurerquelespochesauto-adhésivesnesontutiliséesqu'avecle
réglagefroid.
IL NE FAUT PAS laisserlecordond'alimentationencontactavecdessurfaces
chaudes.
IL NE FAUT PASlaisserpendrelecordond'alimentationdesarmoiresoudes
étagères.
IL NE FAUT PASutiliserl'appareilsilecordond'alimentationestendom-
magé.
IL NE FAUT PAStenterd'ouvrirouderéparerl'appareil.
IL NE FAUT PASdépasserlescaractéristiquesdefonctionnementcitéesde
l'appareil.
IL NE FAUT PASlaisserlesjeunesenfantsutilisercettemachinesansla
supervisiond'unadulte.
IL NE FAUT PASplastifierdesobjetscoupantsoumétalliques(ex:agrafes,
trombones).
IL NE FAUT PASplastifierdesdocumentssensiblesàlachaleur(ex:billets,
ultratsons,etc.)surdessupportschauds.
IL NE FAUT PASplastifieràl'aidedepochesauto-adhésivessurdessupports
chauds.
IL NE FAUT PASplastifierunepochettevide.
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES - CONSERVER POUR UN USAGE FUTUR
• Toujoursplacerl'articledanslapochedelatailleappropriée.
• Faitestoujoursunessaideplastificationaveclesmêmesdimensionset
épaisseuravantdeprocéderaveclesdocumentsfinaux.
• Sinécessaire,coupezlematérielexcédentaireautourdudocument
aprèslaplastificationetlerefroidissement.
• Pourdemeilleursrésultats,utilisezlespochettesdemarque
Fellowes®:
Améliorées3mm,5mm,7mm,10mm(5mm-pochettefroide)
• Quandvoustravaillezavecdespochettesdediversesépaisseurs
(réglagedetempérature),ilestrecommandédecommenceravecles
pochetteslesplusminces.
• Préparezlapochetteetl'articleàplastifier.Placezl'articleaucentre
delapochetteetappuyezsurlebordscelléavant.Assurez-vousquela
pochetten'estpastropgrandepourl'article.
CARACTÉRISTIQUES & CONSEILS
Performance Données techniques
Largeurd'entrée 12,5po Tension/Fréquence/Courant
(Ampères) 120VCA,60Hz,5A
Épaisseurdelapoche(min) 3mil(parcôté) Consommation 1000Watts
Épaisseurdelapoche(max) 10mil(parcôté) Dimensions(HxLxP) 23pox12pox6po
Tempsdechauffageestimé 3minutes Poidsnet 33livres
Tempsderefroidissement 30-60minutes Capacitédeplastification Épaisseurmaxdesdocuments=0,08po
Vitessedeplastification Vitessevariable(0-37po/min) Pochemin=3mil
Nombrederouleaux 6 (épaisseurtotale=2x3=6mil)
IndicationPrêt Léger Pochemax=20mil
Fonctionmarchearrière Oui (épaisseurtotale=2x10=20mil)
Boutonssouples+bip Oui
Interfaceàdiodes Oui
Compatiblesaveclesphotos Oui
Sanstransport Oui
Plaquederefroidissementexterne Oui
Laisseznosexpertsvousaideravecunesolution.
Serviceàlaclientèle...www.fellowes.com
VeuilleztoujoursappelerFellowesavantdecontacterlemagasin.Voirà
l'arrièreducouverclepourlescoordonnés.
VOUS AVEZ BESOIN D'AIDE ?

Interface utilisateur
lumineuse
Pochette / entrée de document
Emplacement du fusible principal (à l'arrière, à
côté du connecteur secteur)
Pochette / sortie de
document
Orifices de ventila-
tion du système de
refroidissement
Interrupteur marche/arrêt (à l'arrière)
LES COMMANDES DE LA PLASTIFIEUSE
COLD HOT STOP REV
PREHT MOUNT 12
MEAS CARRI 34
DN UP 56
TEMPERATURE
SPEED / MOTOR
UPDN
SPEEDTEMPERATURE
°C
DISPLAY
CARRI
MOUNT
HOT
MEAS
PREHT
COLD
READY
90
5
Affichage & d'état par
diodes Réglage de la tempéra-
ture & Commandes de
fonctions
Commandes de vitesse &
du moteur
10