Ferei BL200XQ II User manual

FEATURES
1 Anti-glare twin-head super-bright LED bicycle headlights.
2 Full body and handlebar brackets are made of solid and aerospace-
grade aluminum alloy CNC .
3 Whole aluminum parts of lights are anodized, so the lights are more
durable.
4 The new quick release clamps design, no tools needed to quickly install
and remove the light from bicycle handlebars.
5 Using the United States CREE’s XM-L2 LED as a light source, the service
life of the lights are up to 100,000 hours.
6 Toughened ultra-clear glass lens provides maximum light
transmittance.
7 Patented half-moon shape aluminum alloy reflectors which treated by
special coating process. Arched part reflects the beam right ahead to reach
a further distance; Crescent part prevents the beam reflecting upwards so
to avoid disturbing people and vehicles across, and also spreads the nearby
beam to geta wider range.
8 Rain-resistant construction of lights which is no need to worry to use
the weakening of LED, so lights life is longer.
9 High efficiency, light up to 1720 lumens.
10 Lights are equipped with three red indicator lights which warns the
battery pack’s state of charge as described below:
•Over 80% charge: 3 indicator light on.
•50% - 80% charge: 2 indicator light on.
•20% - 50% charge: 1 indicator light on.
•Below 20% charge: 1 indicator light on and continuous blinking
without pause.
11 Lights’external plug cable can be connected to any 7.4V to 8.4V power
supply.
12 There are two kinds of quick release clamps for the lights to optional:
Available for 31.8 mm conventional diameter handlebar and the other one
is 35 mm large diameter handlebar.
USAGE INSTRUCTIONS
1
be fully charged. While charging, the LED indicator light on the AC power
adaptor will illuminate red. Once the battery is fully charged the LED indi-
cator will change to green. The battery pack can take up to 6 hours to reach
100% charge if fully depleted. Alternatively the battery may be charged for
2 hours for an 80% charge or 3 hours for a 90% charge. While the battery
used for extended periods it should be charged for 4 hours every 3 months.
2 After each3 monthly charge, it is also recommended that the light
be used on high for 10-20 minutes to condition the battery pack before
storing.
3 The BL200XQII is equipped with three indicator lights which blinks in
accordance with the battery pack’s state of charge as described below:
•Over 80% charge: 3 indicator lights on.
•50%-80% charge: 2 indicator lights on.
•20%-50% charge: 1 indicator light on.
•Below 20% charge: 1 indicator light on and continuous blinking
without pause.
4 When the battery pack’s voltage reduce to 5.8v the protection circuit
should be recharged. Be sure to always recharge the battery pack in a safe
place and do not leave unattended while charging.
5 To turn the unit on, briefly depress the small glass switch on the face of
the top panel. The default setting is high mode (1720 lumens).
6
7
button down for 2 seconds and release. The light will blink rapidly to
up and down in brightness. When a desired brightness is displayed press
8 The BL200XQII has a hidden strobe mode with 4 selectable strobe
patterns. To access the strobe mode simply hold down the power button
strobe pattern once again hold for 2 seconds and release. To exit strobe
mode press the button once.
Note: The BL200XQII’s brightness mode are as follows: Turn on/max > User-
USER MANUAL
Anti-glare Twin-head Super-bright
LED Bicycle headlights
SPECIFICATIONS
TYPE BL200XQ II
LED CREE XML2 COOL WHITE
ANSI/FSC MAX USERDEFINED
STROBE
POLICE SLOW FAST SOS
LIGHT PER 100% 10% 20% 30% 40% 50% 60% 70% 80% D
OUTPUT LM 1720 172 344 516 688 860 1032 1204 1376 D
RANGE 270 METERS
RUNTIME 3.5 HOURS*
MAXIMUM INTENSITY 42000 CD
WATERPROOOF GRADE IPX4
ANTIDROP 1 M
DIMENSION MM 75.2 x 86 x 34 LxWxH, without bracket
BATTERY BP4872B LITHIUMION BATTERY PACK
WEIGHT 192 G EXCLUDING BATTERY
OPTIONAL BATTERY BP6872B LITHIUMION BATTERY PACK RUNTIME 7 HOURS*
*INDOOR STATIC TESTING AT 28°C AT MAX OUTPUT
DIAGRAM
SWITCH
HEAD
BATTERY
GAUGED
INDICATOR
QUICK RELEASE CLAMP
BRACKETS
6.5 CM
VC43
5*450MM DISPOSABLE
PLASTIC HANDCUFF
* PHOTOS ARE FOR REFERENCE ONLY. PRODUCTS IN KIND PREVAIL
VELCRO TAPE OR
BATTERY PACK BP4872B
OR B P6872B

USER MANUAL
Patented product, counterfeiting not allowed.
Shenzhen FEREI Lighting Co., Ltd.
3rd Industrial Zone, Xiakeng Village, Tongle, Longgang District,
Shenzhen 518116, China.
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
www.ferei.com
Anti-glare Twin-head Super-bright
LED Bicycle headlights
INTELLIGENT TEMPERATURE CONTROL AND RUNTIME INSTRUCTIONS
This product is designed with a temperature control circuit.
The LED is a heating device that is sensitive to temperatures, especially high
levels of power and brightness. High temperatures will easilydamage or
shorten the life of the LED.
Ferei designs its products with an intelligent temperature-control circuit. It
lamp is not the same. In general, the constant surface temperature of the
lamp is 50ºC to 60ºC. When it exceeds its programmed temperature, it will
automatically reduce its power to cool down, and the brightness decreases
by small steps. After cooling-down (provided that battery voltage is
sufficient) the power with brightness increases again. The process of
improving its brightness is relatively discrete and will not produce a
This stepping goes cyclically to maintainthe user’s safety and the light’s
functionality. In conditions of good air-cooling the lamp delivers light
withoutstepping down even in high levels brightness mode.
There are no preset timers for stepping, but real-time active temperature
measurements, so the actual runtime of the lamp base on active
temperature control to faster or slower battery discharge, may be slightly
longer or shorter runtime than the lampofdata provided.
MAINTENANCE
•Periodically clean the glass lens of dust and debris to ensure maximum
brightness. Use a soft clean cloth or an eyeglass cleaner if possible to avoid
scratching the glass.
•Keep water, dirt, sand and debris out of the cable connections and light
body.
•Unplug the battery pack from the light when not in use to help extend bat-
tery life.
•
use.
WARNINGS
•Do notshine the bicycle light directly into anyone’s eyes.
•Aim the beam down when riding onthe road to avoid blindingoncoming
vehicles.
•The lens andfront area of the light can get hot while in use. Avoid touching
these areas.
•Do notdismantle the light or the battery pack, this will break the waterproof
seal and void warranty.
•The BL200XQII’s power source is a 7.4v lithium-ion battery pack coupled with
a protection circuitboard. Should the battery pack ever fail to charge or cease
normal operation be sure to contact your local Ferei dealer and under no cir-
cumstances attempt self-repair.
•Ferei reserves the right of interpretationofthis manual.
INSTALLATION INSTRUCTIONS
1 Loosen the small buckle of quick-release
clamps from the bracket of light.
2 Move the quick-release clamps out of bracket
of light.
3 Select an appropriate rubber gasket (1 mm, 2.5
mm, 3.5 mm, or 4.1 mm inthickness)and insert
the rubber gasket to the innerside of the holder of
the clamp.
4 Fasten the holder of the clamp to the desired
position on the handlebars of the bicycle.
5 Lock itin place by pressing the small fastener
on the clamp, attaching it to the handlebars of the
bicycle.
6 Whoe light are mount tighten on handlebar of
the bicycle .
7 Thread the Velcro tape ,nylonstrips through
both sides of the battery pack and tightly secure.
8 Tie the cables along withthe frame.
* PHOTOS ARE FOR REFERENCE ONLY. PRODUCTS IN KIND PREVAIL