Ferguson Ariva S300 User manual

Ferguson S300 User Guide for sharing functions
1. CCCAM/ NEWCAMD
a) CCCAM config and upgrade (Config Via PC)
•Config the cccam server account,port, user and password into
”cccam_newcamd.cfg” fi e.
•Enter menu upgrade by usb, choose ”cccam_newcamd.cfg”.
•You can choose to upgrade the config fi e to visib e or hidden, p ease refer
be ow pictures .
b) Account config (manua configuration)
•In main menu, press ”7777” to enter into specia function menu, there are 8
accounts as hidden accounts in net c ient config. You can’t edit in UI, the rest
8 accounts can be edited manua y, for now, from 1-8 accounts we make them
as hidden accounts by defau t. We a so can make 1-8 as visib e, the rest 9-16
are hidden accounts.

•Config the server account, server port, user name and password. If the user
name and password is in hidden mode (picture1 , you can press F1 button to
disp ay. Then you wi see picture2. After you set the parameters, you need to
change the server status to “ON”, picture3 is for your reference.
picture1 picture2
picture3
•P ease press the ye ow button to save the settings.
c) Modify the config on WEB
•P ease make sure the PC and STB are connected to the same LAN, enter the IP
address of STB, for examp e:192.168.1.61.
•When you ogin for the first time, you wi get pop up window with an ask to
set a new password.

•After setting the password, you wi be forwarded to the ogin menu. The
defau t user name is “root”.
•After ogin, you can edit the specia function. P ease choose the protoco , type
in the host ur , port, user id and password.