ferm living TINY TABLE LAMP User manual

TINY TABLE LAMP
ASSEMBLY MANUAL
fermliving.com

- This appliance should not be disposed in a domestic trash receptacle and should instead be recycled appropriately.
GENERAL INSTRUCTIONS
Please read before installation
The safety of this fitting can only be guaranteed if the following instructions are observed during both
WARNING:
installation and use. Please retain these instructions safely after installation.
Please observe the following guidelines:
- Ens
- Never undertake an electrical installation without the proper knowledge or training. If not familiar with
electrical wiring, contact a qualified electrician.
- The product may in no way be modified or tampered with. Any modification may compromise safety and
make the product itself dangerous to use. ferm LIVING does not accept any responsiblility for products that
have been modified.
- This product requires the use of a lightbulb that is not included. Please use a lightbulb that has the relevant
safety certifications and approvals for your area.
- This product is meant for indoor use only.
CLEANING INSTRUCTIONS:
- Use only a soft cloth to clean the product. Dampen the cloth with water and soap or a mild cleanser if needed.
MORE INFORMATION:
To access further information such as product overview and material descriptions, please visit our website
at www.fermliving.com if you have any questions or comments, please do not hesitate to contact us
at [email protected]
TINY TABLE LAMP
Voltage:
Dimmable:
Certification:
Socket:
Recommended Light source:
220-240V, 50Hz
No
CE, IP20, Class II
E14 socket base
Bulb max 25w incandescent
or max 12w LED
TECHNICAL SPECIFICATIONS

Adjust the lampshade aside.
ASSEMBLY PROCESS
1
2
BOX CONTENTS
1 x
Allen key
x1
Lamp
Fix the bulb to the socket.
E14 G45 Bulb
(not included)

Push the on/o switch
and enjoy it.
3
4
FUNCTION
Adjust the lampshade and tighten the
shade with the Allen key (included)