Hay PC TABLE LAMP User manual

– INSTRUCTION MANUAL –
DESIGN BY PIERRE CHARPIN
PC TABLE LAMP

 GENERAL INFORMATION 
TECHNICAL DATA
This product is fitted with an E27 bulb fitting. HAY
recommends using this product with frosted LED
bulbs.
FITTING TYPE | E27
POWER W | 1013W
COLOUR TEMPERATURE | Warm white
HAY will not accept any responsibility for any
accidents, injuries or damages that occur due to
the use of incorrect bulbs.
ATTENTION
Ensure that the power supply to the circuit has
clearly been turned OFF before installing the
product. In some countries, electrical installation
must be carried out by authorised electricians/
contractors; please check with your local
authority for guidance.
The product must not be modified in any way.
HAY accepts no responsibility for any products
that have been modified or tampered with. If the
external flexible cable or cord of this luminaire is
damaged, it should be exclusively replaced by a
qualified electrician in order to avoid an electrical
hazard. These lamps are designed for indoor use
only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp
cloth and mild detergent, or a dry microfibre
cloth. Do not use alcohol or any other solvents
to clean the product and avoid using abrasive or
rough sponges. Ensure that the power supply has
been turned OFF before cleaning the product.

Base Shade
 PARTS 
Diffuser UK converter

1.
Unpack all the parts and check that you have received all the
parts listed. Hold the flat diffuser with both hands and twist into place,
ensuring it is securely fitted to the lamp body.

2.
Ensure that the power is off and the lamp is not plugged in.
Screw an E27 bulb into the bulb fitting. It is advised that a dimmable LED bulb,
no more than 13W is used in this lamp.

3.
Once the bulb is in place, place the lampshade onto the lamp base, aligning the
grooves in the metal ring in the shade with the bayonet fitting on the lamp base.
Turn clockwise and tighten securely.

4.
Place the lamp onto a flat, stable surface.
The lamp has a two-step dimmable feature, which can be controlled
by touching the lamp base. First touch sets it to low brightness and second
touch sets it to maximum brightness. Third touch will turn the lamp off again.
50%100%

 UK CUSTOMERS ONLY 
Please note that for UK customers, the lamp will come supplied with a pre-mounted
UK converter. The UK converter will be mounted over the existing EU plug, so the
lamp is compatible and ready for use with UK sockets.
If not pre-mounted, please follow the below instruction.
Insert the EU plug into the converter provided. Close the converter over the EU
plug with the pins secured in the internal spring clip contacts. Screw the converter
together to ensure the UK plug is secure.

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your lighting.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
PC Table Lamp by scanning the QR code
You can also find the same information here
hay.dk/downloads

12012023
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com