Fetco L3D-10 User manual

CARING FOR YOUR LUXUS® THERMAL DISPENSER
Before cleaning, be sure that all residual coffee in the dispenser has been
emptied out. Next, fill the dispenser 1/4 to 1/2 full with hot water. If desired, an
appropriate cleaning solution may also be used.
CAUTION: Never immerse the dispenser or funnel
completely in water or run through any dishwasher.
Daily Cleaning:
Weekly Cleaning:
First, remove the black funnel
assembly. Then, using a
cleaning brush, scrub out the
liner thoroughly, loosening
coffee oils into the water.
Remove the drip tray by
depressing the button on the
back of the dispenser while
pulling forward on the front of
the drip tray. Discard any
coffee from the tray. Clean
and rinse the drip tray before
replacing. Empty out the dirty
water through the faucet.
Remove the faucet guard by
unscrewing the lock nut under
the dispenser. Then lift up on
the grey knob under the
faucet and turn the faucet
180 degrees. Pull forward to
remove the faucet. Using a
small brush clean the
dispense tube and facuet.
FETCO and LUXUS are all trademarks or registered trademarks of Food Equipment Technologies Company.
®