FEZIBO 40836584276037 User manual

ASSEMBLY INSTRUCTIONS
Our packing box doubles as an assembly workbench

Semi-finished *1pc Base leg*5pcs Headrest*1pc
Gas lift *1pc
F
Wheel*5pcs
M
L
R
Armrest *2pcs
Chair Base *1pc
I E
Screw*6pcs
M6X35MM
Gasket*6pcs
M6X14X1.2MM
L
Wrench *1pc
HG
Headrest knob*1pc

Headrest*1pc
Armrest *2pcs
B
I
Attach base legs(B)to chair
base(I)
Insert 5 wheels(F)into the
slot of the base leg(B)
F
B
D
B
Install gas lift(D)ito the five
star base(B)
A
E
L
MR
Attach the armrests(M)to the
Seat(A)with the 6 screws
M6*35(E)and the 6 gaskets
M6*14*1.2(L)
[e-mail]

A
Place the Seat(A) on the gas
lift(D)
Lift the chair's backrest, and
lock the back when clicked.
G
Fix the headrest(G) on the
backrest. Check the chair to
make sure all parts and screws
are securely tightened
Chair Assembled

Headrest adjustment:
Adjust the height and
angle of the headrest
The armrest can be adjusted
up & down, front & back,
in & out as per your sitting
posture. The angle can also
be adjusted.
Lumbar support adjustment:
Up and down adjustment 60MM
Seat height adjustment:
Press the handle to raise
or lower the chair
UP:
Requires a slight butt lift
when turning the handle
Down:
Sit on a chair while turning
the handle
Backrest adjustment:
Pull out the handle to adjust
it backward, and push the
handle chair to lock(Can be
fixed at 4 angles). It takes a
bit of body pressure on the
backrest to bring it back to
a smaller angle.
Function Introduction

Standing behind the chair,
press the button with both
hands to fold the backrest
Pull out the footrest/leg rest,
flip the pedal
Flip the pedals to their original position
and push the footrest/leg rest