FEZIBO Desktops 48 User manual

FEZIBO standing desk
Assembly instructions for
use with FEZIBO Desktops
48” and larger.
For assembly assistance,
email [email protected]

Cautions
Voltage
Converters
Use & liability
1
Please read this manual carefully. If this desk changes hands, please
provide this manual to the new owner.
Make sure the desktop is not touching any obstacles or walls and that
no obstacles are in the desk’s path. Make sure all cords are an appro-
priate length to accommodate the full range of height adjustment.
Keep children away from desk components. There is a risk of injury
and electric shock Do not sit or stand on the desk frame. Do not crawl
or lie under the desk frame.
Do not open or modify any of the components, including the Lifting
Columns, Control Box, or Handset. Doing so risks electric shock and
voids any warranty claims.
Placing objects taller than 20” underneath the desk will obstruct the
desk’s movement and may result in physical damage.
Using a voltage converter could cause damage to the desk and is
considered improper use. The resulting damage is not covered by the
warranty.
Verify the voltage of the Control Box as labeled to avoid damage.
Alternative voltage Control Boxes are available from FEZIBO.
This FEZIBO height adjustable desk has electric motors and is
designed for use in dry work environments only.
This FEZIBO desk is adjustable so it can be positioned at an optimal
ergonomic heigh Any extracurricular use is at the user’s own risk.
Under no circumstances does the manufacturer accept warranty
claims or liability claims for damage caused by improper use or han-
dling of the desk frame.

2
On a padded or carpeted area, take all of the items out
of your FEZIBO frame box and confirm that nothing is
missing. Reference the included parts listings on page 3.
Before starting
Specs
Tools Needed
Phillips Screw DriverElectric Drill
(Not Included)(Not Included)
Elecrtic control part:
1. Input Voltage: 100-240Vac 50/60Hz
2. Duty cycle: 10%MAX 2min on 18min off
Desk frame part:
1. Dynamic load: 60KG / 132Lbs
2. The maximum static load: 80KG / 176Lbs
Safety warning Please read this manual carefully before use.
1. Indoor use only.
2. The product must be connected to the correct power supply.
3. For any accessories connected to the control box, the plug type
and electrical characteristics must conform to its specifications.
4. If the transformer's external cable is damaged and need to be
replaced,new accessory will be provided by the manufacturer or
its service agent.

FEZIBO standing desk
Wood Screws: Pointy End Machine Screws: Flat End M5 M4 M2.5
Pro tip Tools Included
3
M8 x 8
B Lifting Colum with Gerabox
Strap
N Connection
K Medium Machine
H Handset
E Sync Rod
C Foot x 2
Clip x 10
O Cable
M6 x 10
L Small Machine
I Power Adapter
F Side Bracket x 2
x24 (For 48”/55”)
x28 (For 63”)
Screw
A Lifting Colum
D Crossbar
G Power Cable
x3 (For 48”/55”)
x4 (For 63”)
x5 (For 48”)
x6 (For 55”/63”)
J Medium Wood
Screw x 2
M Small Wood
P Hook x 2 Q Tabletop x 2 R Bolt

Assembly
Step 1
Step 2
4
M5
C Foot x 2
M4 M6 x 10
B Lifting Colum with Gerabox
A Lifting Colum
D Crossbar
Checklist
Checklist
L Small Machine
M8 x 8
K Medium Machine
B
A
C
K
C
M5
M4
D
L

M4
Step 3
Step 4
5
E Sync Rod
M2.5
F Side Bracket x 2
Checklist
Checklist
M2.5
LOOSEN
M2.5
TIGHTEN
E
F
F
M4
M6 x 10
L Small Machine

Step 5
7
M2.5
N
N
NN
N
N
N
J
Checklist
N Connection
Screw
J Medium Wood
R Bolt
For 48”
N
N
N
Rx6
Rx5
For 55”
For 63”
x5 (For 48”)
x6 (For 55”/ 63”)
Strap x3 (For 48”/55”)
x4 (For 63”)
x12 (For 48”/55”)
x16 (For 63”)
Rx6

Step 6
Step 7
7
Screw x 10
J Medium Wood
Checklist
Checklist
QQ Tabletop x 2
Please make sure the Part E (sync) is facing you!
H
H Handset
Screw x 2
M Small Wood
J

Step 8
8
I
G
P
P
P
G Power Cable
I Power Adapter
Screw x 2
J Medium Wood
Checklist

9
Up & Down Keys
Please keep pressing UP/DOWN key to adjust desk height until you get an optimum height.
Display Screen
The whole handset surface is a button panel. If there is no press within 30 seconds, the screen is locked
and M1/M2/M3/M4 keys are locked correspondingly, you should press Up or Down key first, it can be
used when the display screen light up.
Memory Key M1/M2/M3/M4
After seting memory keys, the desk can lift automatically to memory height.
※ How to set memory mode
Please keep touching M1/M2/M3/M4 key for 5 seconds, until "di" sound, the memory height is successfully
saved.Then light touch M1/M2/M3/M4, the desk moves to memory height automatically.
Safety Function
When the desktop is on the rise or down, encountered reverse resistance,the desk will rebound.
Handset shows error code and solution
DIRECTIONS FOR USE
Up&Down key Memory key
Advanced Function Settings
Display Screen
Display the height value of the desk.
Sensitivity of downing
anti collision setting
APress
M4 Key
1 High sensitivity
2 middle sensitivity
Press M4 key till hear
the second "di" sound
（around 10s）.
use or key to choose
A,b,C,d,E,F
0 cm
1 inch
cm or inch setting
bPress
M4 Key
Basic height setting
CPress
M4 Key
Minimum height setting
dPress
M4 Key
Maximum height setting
EPress
M4 Key
Press
M4 Key
Sensitivity of upping
anti collision setting
F
3 low sensitivity
4 anti collision OFF
Using or key to set basic height
Using or to adjust the height
Using or to adjust the height
Press M3 BACK
to the menu,
the data reserved
Once again Press M3,
BACK to the main,
all setting complete
1 High sensitivity
2 middle sensitivity
3 low sensitivity
4 anti collision OFF
Error code Fault cause Solution
ER1 Power off and restart. If fault still exists, it is motor problem.
Communication fault
Overload protection
Check cables for handset and controller, power off and restart.
Run continuously for
2.5 to 5 minutes.
Lighten loads, power off and restart.
Overload, power protection, automatic recovery after
five minutes
Motor stop
Power off (over 20s)and restart. If handset display RST(DOWN key
unlocked),keep touching DOWN key to the lowest normal number.
Synchro error
Cable fault Check motor cable off or broken, power off and restart.
ER3
ER4
ER5
HOT
ER2

10
WARRANTY SERVICE
To provide the best service to you, don’t forget to register your Fezibo product to
confirm your warranty.
It only takes a few simple steps and then you can access a wide range of services such
as technical support, new product alert, promotions, and warranty service from Fezibo.
Send your name and order ID to ser[email protected]