FEZIBO Desktops 48 User manual

ASSEMBLY
INSTRUCTION
For Assembly assistance, email [email protected]
For Use With
FEZIBO Desktops 48 and larger

Cautions
Voltage
Converters
Use & liability
1
Please read this manual carefully. If this desk changes hands, please
provide this manual to the new owner.
Make sure the desktop is not touching any obstacles or walls and that
no obstacles are in the desk’s path. Make sure all cords are an appro-
priate length to accommodate the full range of height adjustment.
Keep children away from desk components. There is a risk of injury
and electric shock Do not sit or stand on the desk frame. Do not crawl
or lie under the desk frame.
Do not open or modify any of the components, including the Lifting
Columns, Control Box, or Handset. Doing so risks electric shock and
voids any warranty claims.
Placing objects taller than 20” underneath the desk will obstruct the
desk’s movement and may result in physical damage.
Using a voltage converter could cause damage to the desk and is
considered improper use. The resulting damage is not covered by the
warranty.
Verify the voltage of the Control Box as labeled to avoid damage.
Alternative voltage Control Boxes are available from FEZIBO.
This FEZIBO height adjustable desk has electric motors and is
designed for use in dry work environments only.
This FEZIBO desk is adjustable so it can be positioned at an optimal
ergonomic heigh Any extracurricular use is at the user’s own risk.
Under no circumstances does the manufacturer accept warranty
claims or liability claims for damage caused by improper use or han-
dling of the desk frame.

2
On a padded or carpeted area, take all of the items out
of your FEZIBO frame box and confirm that nothing is
missing. Reference the included parts listings on page 3.
Before starting
Specs
Tools Needed
Phillips Screw DriverElectric Drill
(Not Included)(Not Included)
Elecrtic control part:
1. Input Voltage: 100-240Vac 50/60Hz
2. Duty cycle: 10%MAX 2min on 18min off
Desk frame part:
1. Dynamic load: 60KG / 132Lbs
2. The maximum static load: 80KG / 176Lbs
Safety warning Please read this manual carefully before use.
1. Indoor use only.
2. The product must be connected to the correct power supply.
3. For any accessories connected to the control box, the plug type
and electrical characteristics must conform to its specifications.
4. If the transformer's external cable is damaged and need to be
replaced,new accessory will be provided by the manufacturer or
its service agent.

FEZIBO standing desk
Wood Screws: Pointy End Machine Screws: Flat End M5 M4 M2.5
Pro tip Tools Included
3
M8 x 8
B Lifting Colum with Gerabox
Strap
N Connection
K Medium Machine
H Handset
E Sync Rod
C Foot x 2
Clip x 10
O Cable
M6 x 10
L Small Machine
I Power Adapter
F Side Bracket x 2
x28 (For 63”)
x22 (For 48”)
Screw x26(For 55”)
A Lifting Colum
D Crossbar
G Power Cable
x3 (For 48”/55”)
x4 (For 63”)
x5 (For 48”)
x6 (For 55”/63”)
J Medium Wood
Screw x 2
M Small Wood
P Hook x 2 Q Tabletop x 2 R Bolt

Assembly
Step 1
Step 2
4
M5
C Foot x 2
M4 M6 x 10
B Lifting Colum with Gerabox
A Lifting Colum
D Crossbar
Checklist
Checklist
L Small Machine
M8 x 8
K Medium Machine
B
A
C
K
C
M5
M4
D
L

M4
Step 3
Step 4
5
E Sync Rod
M2.5
F Side Bracket x 2
Checklist
Checklist
M2.5
LOOSEN
M2.5
TIGHTEN
E
F
F
M4
M6 x 10
L Small Machine

Step 5
6
M2.5
N
N
NN
N
N
N
J
Checklist
N Connection
Screw
J Medium Wood
R Bolt
For 48”
N
N
N
Rx6
Rx5
For 55”
For 63”
x5 (For 48”)
x6 (For 55”/ 63”)
Strap x3 (For 48”/55”)
x4 (For 63”)
x6(For 48”/55”)
x8 (For 63”)
Rx6

Step 6
Step 7
7
Screw x 10
J Medium Wood
Checklist
Checklist
QQ Tabletop x 2
Please make sure the Part E (sync) is facing you!
H
H Handset
Screw x 2
M Small Wood
J

Step 8
8
I
G
P
P
P
G Power Cable
I Power Adapter
Screw x 2
J Medium Wood
Checklist

Up & Down Keys
Please keep pressing UP/DOWN key to adjust desk height until you get an optimum height.
Display Screen
The whole handset surface is a button panel. If there is no press within 30 seconds, the screen is locked
and M1/M2/M3/M4 keys are locked correspondingly, you should press Up or Down key first, it can be
used when the display screen light up.
Memory Key M1/M2/M3/M4
After seting memory keys, the desk can lift automatically to memory height.
※ How to set memory mode
Please keep touching M1/M2/M3/M4 key for 5 seconds, until "di" sound, the memory height is successfully
saved.Then light touch M1/M2/M3/M4, the desk moves to memory height automatically.
DIRECTIONS FOR USE
Up&Down key Memory key
Display Screen
Display the height value of the desk.
Set Key(M4)
Press the "S" key when internal parameters need to be set.
Initialization
Safety Function
When the desktop is on the rise or down, encountered reverse resistance,the desk will rebound.
Error code Fault cause Solution
E01,E06,E07
E04
E05
E08
E11,E21,E40,E41
E12,E22,E42,E43
E14~E17,E24~E27
E18,E28
change power
Unplug and replug the cable of hand set
Anticollision alert
desktop sloping check the desktop
Connection cable failure Check the connecting cable
controller fault Exchange the controller
motor fault change motor
overloading reduce the loading
overtime operation Automatic recovery after
stop using for 20 minutes
HOT
power fault
handset fault
1.When"RST”is on the display screen, press the" "button until the desk frame reaches its lowest point.
After hearing the "di" sound and desk frame rebounds, initialization is completed.
(P.S. The button cannot be released during this operation, otherwise the initialization will fail)
2.Forced initialization: Press the" "button until the desk frame reaches its lowest point, then release
the button and press it again for about 5 seconds until hear the "di" sound and desk frame rebound,
and the initialization is completed.
3.Restore the factory settings: When new controller is changed or the parameters need to be restored
to the factory settings, press the" "and" "buttons simultaneously, you will hear the first “di” sound
after about 5 seconds and second “di” sound after 10 seconds. When the display screen shows "RST",
please operate refer to the No.1 item.
Handset shows error code and solution
Rebound reminder , normal condition
Set key
9

Advanced Function Settings
Limited height setting:Press" "and" "key for 5 seconds till heard a bee sound ,
limited height setting success.
(minimum limited height＜96，maximum limited height＞97).
Cancel the function, run to the limit height, press" "and" "again for 5 seconds,
hear the buzzer sound, limited height Cancel.
Lock and unlock:Press" "and " S " key for 5 seconds , Screen display "LOC" ,
system locked up,Press" "and " S " key for 5 seconds, screen display "LOC"
turn to number ,system unlocked.
Set up multiple functions
Press "m3" to return
Menu "s - *" interface
Metric and Inch exchange
S-1 Click “M4” Key
0
1
2
3
4
5
6
7
8
Use or adjust the basement height
Long pressing desk running,
hands off desk stop running
0
1
8
0 Metric
1 Inch
S-2
S-3
S-4
S-5
S-6
S-8
0 shut down
1 The most insensitive
8 The most sensitive
0 shut down
1 The most insensitive
8 The most sensitive
0
Click desk running, second
click to stop running
1
S-7
Basement height
DIRECTIONS FOR USE
Press M4 key till hear
the second "di" sound
（around 10s）.
use or key to choose
Click “M4” Key
Click “M4” Key
Click “M4” Key
Click “M4” Key
Click “M4” Key
Click “M4” Key
Click “M4” Key
Reservation function
Press M4 to return to the
numerical display interface
Set up successfully
up anti collison sensitivity
(Current detection)
down anti collison
sensitivity(Current detection)
Reservation function
Memory key operation
Overheat protection Turn on(Continuous operation
for two minutes, error HOT)
1
0 shut down
10

WARRANTY SERVICE
To provide the best service to you, don’t forget to register your FEZIBO product to
confirm your warranty.
It only takes a few simple steps and then you can access a wide range of services such
as technical support, new product alert, promotions, and warranty service from FEZIBO.
Send your name and order ID to ser[email protected]