Fired Up Corporation MARBLE FIREPLACE SUITE User manual

FUI0104 V1_020922
INSTALLATION GUIDE
www.firedupcorporation.com/manual
Please read through the use & care manual provided with this product first.
MARBLE FIREPLACE SUITE
Installation Guide

02
INSTALLATION
1. Push the hearth against the wall, ensuring it
is level and secure.
2. Position the plinth on the hearth, ensure it is
central.
Note: Do not push the plinth flat against the
wall. Leave a gap of roughly 15mm away
from the wall.
3. Carefully lift and place the fire onto the
plinth.
PARTS SUPPLIED
• Hearth
• Surround
• Shelf
• MDF Plinth
• Fire
• LED Strip Light, Switch & Plug
Installation
TOOLS & PARTS REQUIRED
• Pencil/Pen
• Drill & 6mm Drill Bit
• Silicone / Caulk

4. With help, lift the body onto the hearth and
push back against the wall, ensuring the fire
slides into the opening.
Ensure the fire and body remain central to
the hearth.
Fix the body to the wall using the brackets
and anti-topple straps attached.
5. Feed the LED strip lights through the gap in
the back of the surround.
From the front of the fireplace, remove the
tape on the back of the LED strip lights
and stick the lights into the channel.
6. Once the LED strip lights are fitted, connect
the extension cable to the LED strip lights
and the plug driver cable to the extension
cable.
03
INSTALLATION
Anti-Topple
Strap
Bracket
LED Strip
Light
LED Strip
Channel

04
7. Detatch the switch from the extension
cable and insert the switch into the hole in
the leg, then re-attach the cable to the
switch.
Plug the LED strip lights in and rest the
transformer inside the fireplace.
8. Apply “pea sized” dabs of adhesive onto
the top edge of the surround.
9. With help, lift the shelf and slowly lower onto
the surround
Check the shelf is central once lowered into
position, adjust accordingly before the
adhesive sets.
INSTALLATION