FireplaceXtrordinair 864 TRV (Top/Rear Vent) User manual

864TRV Arched Face
Classic Black: 99300497 Artisan: 99300498
French Country Black: 95800616 Artisan Patina Bronze 95800621
Page 1 of 4 17601406 - 9/14/11 © Travis Industries, Inc.
Compatibility:
• 864TRV Fireplace
Packing List:
• Face • (4) 8-32 Nuts
• (2) Face Mounting Brackets (w screws) • (2) 10-24 1-1/2" Screws
• Glass Frame Cover
The FPX Face Upgrade Kit (98500686) must be
installed prior to installing the facing material and face.
Hand-Rubbed Patina Finishes
The optional patina finish is hand applied by a skilled artisan to permanently alter the metal colors and texture
of the face. Each face is individually hand-polished and fired in an oven which imparts unique color subtleties
with no two finishes alike. The patina finish on your face is a “living” color and will age and antique over time.
Enjoy the timeless, rich luster of your beautiful new face.
Installation Details
41”
35-3/4"
5"
Radius = 45-3/4”
NOTE FOR THICK FACING (BRICK, ROCK, ETC.):
The Fireplace Xtrodinair 864 Set-Up Face is recommended for
masonry installation (98500688). The set-up face helps locate
and support the masonry during installation.
SIDE OF FIREPLACE
1”
5/16” TO 1”
NOTE:
This face has an adjustable bracket that allows for
different facing depths to be tucked under the face.

864TRV Arched Face
Classic Black: 99300497 Artisan: 99300498
French Country Black: 95800616 Artisan Patina Bronze 95800621
Page 2 of 4 17601406 - 9/14/11 © Travis Industries, Inc.
Installation
1 Remove the glass frame (see the owner's manual for details). Install the glass frame cover following the
directions below. Replace the glass frame.
Push these pins inwards
to lock the cover in place.
Place the cover over the top of the door frame.

864TRV Arched Face
Classic Black: 99300497 Artisan: 99300498
French Country Black: 95800616 Artisan Patina Bronze 95800621
Page 3 of 4 17601406 - 9/14/11 © Travis Industries, Inc.
2 The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation manual
for complete details.
Raised
Fireplaces


























































Note how the tile is 1”
(maximum) above the
base of the fireplace.





















































Maximum 1`” Hearth
Floor-Level
Fireplaces






864TRV Arched Face
Classic Black: 99300497 Artisan: 99300498
French Country Black: 95800616 Artisan Patina Bronze 95800621
Page 4 of 4 17601406 - 9/14/11 © Travis Industries, Inc.
3 Install the face following the directions below.




























































Attach the upper brackets
to the face with the
included nuts.
Slide the face into place. The
tabs on the upper brackets insert
into the slots on the fireplace
brackets, holding the face in place
while the screws are tightened.
a
b
cThe face is secured to the fireplace
with four screws. Two of the screws
are fastened to the upper brackets
with press nuts. The lower screws
are included with the face.
Plated Surfaces
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Denatured
Alcohol
Soft Cloth