FireplaceXtrordinair 98501021 FPL ELECTRIC 51 User manual

4006492
98501021 FPL ELECTRIC 51, 98501022 FPL ELECTRIC 64,
98501023 FPL ELECTRIC 115
This manual will enable you to obtain a safe, efficient and dep
n
Do not alter or modify this fireplace or its components under a
fireplace system, including but not limited to the fireplace and
e
source.
exactly, an electric shock or fire may result causing
property damage, personal injury or loss of life.

TABLE OF CONTENTS
2
CONGRATULATIONS!
498501021 FPL ELECTRIC 51
98501022 FPL ELECTRIC 64
98501023 FPL ELECTRIC 115
7
11
14
15
18
22
23
25
24
8
9
12
13
19
20
21
e 5
e 6
you have many years of dependable and enjoyable services from your Fireplace Xtrordinair product.
Spare Parts List

IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING!
3
B
A
C D
Fig. 1
Grounding Pin
Cover Of Grounded
Outlet Box
Metal
Screws
Adapter
Grounding
Means
Grounding
Pin
9.A heater has hot or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors
or liquids are used or stored.
10
blocked
14.
The alarm when illuminated will appear as a flashing "F" in the display
at A.

98501021 FPL ELECTRIC 51
4
98501021 FPL ELECTRIC 51
Built
olta e
Am s
h
oss t
Co th
HEATER
21
93
16
39
51
2
17
21
16
51
73
16
5
16
17
16
7
8
7
8
43
4006492
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence of local codes,
us the current CSA C22.1 Canadian
Electrical Code in Canada or ANSI/NFPA 70

5
Built
olta e
Am s
h
HEATER
98501022 FPL ELECTRIC 64
98501022 FPL ELECTRIC 64
21
93
16
54 7
16
64
51
2
17
21
16
73
16
5
16
17
16
7
8
7 8
58
4006492
oss t
This appliance has been tested in
accordance with the UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence of local codes,
us the current CSA C22.1 Canadian
Electrical Code in Canada or ANSI/NFPA 70

4
98501023 FPL ELECTRIC 115
6
98501023 FPL ELECTRIC 115
Built
olta e
Am s
h
oss
HEATER
51
2
17
29
16
73
16
5
16
17
16
7
8
21
93
16
103 1
115
7
8
106
4006492
This appliance has been tested in
accordance with the
153.64 lbs or 69.69kg
UL Standand 2021 for
appliances in the United States and Canada. If
please contact your local dealer.
NOTE: This appliance must be electrically
wired and grounded in accordance with
local codes. In the absence of local codes,
us the current CSA C22.1 Canadian
Electrical Code in Canada or ANSI/NFPA 70
Right side
Cord Length 74.81” or 190.00 cm

INSTALLATION OVERVIEW
NOTE: BEFORE YOU INSTALL
SITE SELECTION
w
Re f i
w all
e
t a
n a
h wa o
et f
w o o e all
elat at to
WARNING:
T
ew
aw
Le el
T
Plumb Line
Plie s
e
es 7
E
at
TOOLS & BUILDING SUPPLIES
NORMALLY REQUIRED
at efe
Power supply Wire Gage
Voltage Wire Gage Fuse
120 15 MP
Wall switch / t hermostat Wire Gage
olta e a e
olts e
PACKAGING LIST
R te
18
E
in
Turn Off the unit, then pull the
Fireglass
Hardware Pack
Wall Finishing Materials
Caulking Materials
Ensure the power cord is not installed so
that it is pinched or against a sharp edge
and ensure that the power cord is stored
or secured to avoid tripping or snagging
to reduce the risk of fire, electric shock or
injury to persons.
must comply with local building codes
reduce the risk of fire, electric shock and
injury to persons.
To reduce the risk of fire, do not store or
use gasoline or other flammable vapors
and liquids in the vicinity of the heater.
9
11
One Mood LED Light Remote Control

PACKAGE CONTENTS
A
E
BC
8
1A
B1
C1
1
E1(43",58")
3(106")
F
1F Mood LED Light Remote Control

NEW CONSTRUCTION OR
RENOVATION
CAUTION:
Tw a to
moistu ate at leas
t e,
n , et
t
an sto af
e a wall with a f ing
tthe si e of y
Lea e at leas
ny new wi
mus
an na l s othe i able
outlets o To e the
WARNING:WARNING:
9
6 in
6 in
6 in
a
b
c
Dry Wall
98501021 FPL ELECTRIC 51
98501022 FPL ELECTRIC 64
98501023 FPL ELECTRIC 115
a b
43
58
106
44
59
107
5
2
1
5
2
1
5
2
1
materials
2
1
17 "
2
1
17 "
2
1
17 "
To prevent contact with sagging or
must be installed against vapor barrier
could occur and fire may result.

The glass front will extend 2 1/8"
minimum into the living space
FIREPLACE INSTALLATION BUILT IN
k r ow
w
all s
e 7
e 6
NOTE BEFORE YOU INSTALL
all
10
Adjust the unit to achieve the desired amont
of depth. (Figure 6)
into the opening

It is s e a ews be
ew nto the wall s
e su e it is le
nt e
fo st at
f ee f om the w
e 8
e 9
NOTE: BEFORE YOU INSTALL
ta es f
wall b et
11
e 10
ta es f
all
3 feet

12
- HARDWIRE
Ensure the unit is power off and
the plug is not plugged before
WARNING:
Release the screws
Step 1
Remove the cover
Feed the supply wires through
the 7/8” hole
Lock the power cord stator
Connect the Live wire (Black)
Connect the Ground wire (Yellow)
Connect the Neutral wire (White)
Tighten the strain relief
Step 2
Re-install the juncon box cover
Touch Panel
Step 3
Touch Panel
HARD WIRING CONNECTION:
wire the appliance directly to household wiring.
This appliance must be electrically connected and grounded in accordance with local codes, If hard wired.
In the absence of local codes, use the current CSA C22.1 Canadian Electrical Code in Canada or the current

13
1. To change from the log to Fire Glass (Figure 12.1)
Unplug unit from wall and make sure the appliance is switched off.
2. Choose the color of Fire Glass you would like to use. (Figure 11)
3. Place the Fire Glass into the Tray (Figure 12.2)
Fire Glass Tray
the

NOTE: BEFORE YOU INSTALL
FRONT INSTALLATION
It is e at tw nstall the
font ont w safe
e 13
e 14 Fi u 16Fi u 15
ew
Mount
ew
14
1. Ensure the locking hook on either side of the
brackets with the four (4) shoulder screws on the
side of the appliance body (figure 14, or Figure
15)
using the pre-installed hooks.
Locking
hook open
Locking
hook open
Locking
hook closed

OPERATING THE UNIT
CONTROLLING THE FIREPLACE
e 18
e 19
°F
°C
IR FF FLAME
EMBER
I PLA HEAT TIMER
a.IR: ei in inf a e si nals in uts
c.FLAME/EMBERS: (Flame light and embers light indicator) The in i ato will be on
on
on
g. /℉The o e n i to will be on when the
o e n tem e tu e unit i u in tem e tu e a stment
DISPLAY AND FUNCTIONS
CONTROLLING METHOD:
15
Remote control:
TIME SETTING:
This inf a e IR emote ont ol,
b.ON/OFF: (Power indicator) The
indicator
will be on
POWER:
for the first 5 seconds of
for the first 5 seconds of the unit being on,
aer 5 seconds it will go to black.

16
REDUCING EMBER LIGHT INTENSITY:
INCREASING EMBER LIGHT INTENSITY:
HEATER SWITCH:
HIGH HEATING LEVEL:
LOW HEATING LEVEL:
TEMPERATURE ADJUSTING:
℉ ℉ ℃ ℃
REDUCING FLAME INTENSITY:
INCREASING FLAME INTENSITY:
The heate is lay a i es The isua i to will
F , display panel indicates ”
Re If you w i e to set the the mostat sim ly use
to
this
℃
℃
the
℉℉ ℃℃
to
display

e 20
17
FLAME:
HEAT:
(I)
ally
℉℉20℃℃
℉20℃℉02 ℃
(II)
℉ ℃ ℉
TIMER:
POWER:
1
to
simultaneously.
the
between
30 minute
℉ ℃
B: Touch Screen Operaons
and aer 5 seconds will turn off. The HEAT indicator on the main unit display
panel is always on (for both heang stages) unl the heater is switched off

B i htness B i htness
Re een
an e een
a ellow Cyan
ellow Li ht Blue
t aw ellow y Blue
18
MOOD LIGHT
MOOD LIGHT
MOOD LIGHT
2.The MOOD LIGHT LED is installed on the back of the glass and must be plugged in.
**
FF
Blue hite
a Blue
Pin
* - The Brightness Up and Down buttons will increase or decrease the speed of any motion
setting (see 1-4). There are 9 speed settings

19
REPLACING THE REMOTE CONTROL BATTERY
When the remote control stops operating or its range seems reduced, it is time to replace the batteries.
Remove the batteries if the remote control won’t be used for a long period of time.
1. The battery compartment is located on the back of the remote.
2. Press the small tab inward as you slide the battery door open and remove the old batteries.
3. Replace with (2) AA batteries (not included), making sure the + and - sides of the battery match the
inside of the battery compartment.
4. Replace the battery door.
CAUTION:
Always purchase the correct size and grade of battery most suitable for the intended use.
y.
Note:
Batteries may contain hazardous substances which could be endangering to the
environment and to human health.
This symbol marked on the batteryand/or packaging indicates that used batteries shall
not be treated as municipal waste. Instead it shall be left at the appropriate collection
point for recycling.
By ensuring used batteries are disposed of correctly, you will help to prevent potential
The recycling of
materials will help to conserve natural resources.
For more information about collection and recycling of used batteries, please contact
your local municipality or your waste disposal service.
Note: please operate remote transmitter at a slow measured pace. Press the remote control buttons
with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause
the transmitter to Malfunction.
DISPOSAL OF USED BATTERIES

20
CARE AND MAINTENANCE
CLEARANCE TO COMBUSTIBLES
Keep electrical cords, drapery, furniture and other combustibles at least 3 ft. from the front of the heater
and away from the sides.
CLEANING TRIM
Clean the metal trim using a soft cloth, slightly dampened with a citrus oil-based product and buff with a
clean soft cloth. Do not use brass polish or household cleaners as these products will damage the metal
trim. Citrus oil-based products can be obtained at supermarkets or hardware stores.
WARNING: Make sure the power is turned off before proceeding. Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and local codes.
If repairing or replacing any electrical component or wiring, the original wire routing,
color coding and securing locations must be followed.
WARNING: Electrical outlet wiring must comply with local building codes and other
WARNING: . Immediately
electrical system.
WARNING: Disconnect power before attempting any maintenance or cleaning to reduce
WARNING: During any service of this appliance, the power to the unit must be turned off.
First turn the main power switch to the OFF position. Then remove the electrical plug from
the wall outlet.