Fisher & Paykel SINGLE DISHDRAWER DD24SCTX9 User manual

Preference Options
Option Rinse Aid
Water
Softener
(Some
models
only)
Open Drawer Auto
Power-On
(Suitable as a
Sabbath Option)
Turn
Tones Off
Closed Drawer
Autolock
What
does
it
do?
egulates the amount of
rinse aid dispensed. educe
this setting if there is excess
foam after a wash. Increase
this setting if dishes are wet
or streaky after a wash.
efer to
the ‘Water
softener’
section of
the ‘User
guide’ for
details.
Your dishwasher is
factory-set to
automatically power on
for 30 seconds
whenever you open
the drawer. You can
turn this setting off.
This turns
all tones
off except
for fault
alerts.
When this setting is
on, the drawer will
automatically lock 30
seconds after it’s
closed. It can then
be unlocked by
pressing
(unless Keylock or
Childlock is also
activated). Useful in
boats or motor
homes.
How to Change the Settings of an Option
1. Check
• Check that there is no wash underway, press
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCTX9/User_Guide_DD24SCTX9/11_P…
Updated: Tue, 16 Nov 2021 11:04:07 GMT
Powered by
1

2. Enter Menu & Scroll to Option
• To enter the menu: Press and hold the
and
together for four seconds.
• You are now in the inse aid option of the preference options menu.
◦ If you want to change the inse aid setting, go to step 3 now.
◦ If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
. To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of
the sequence, the menu will start again with inse aid.
Option Rinse Aid
Water
Softener
(Some models
only)
Open Drawer Auto
Power-On
(Suitable as a Sabbath
Option)
Turn
Tones Off
Closed Drawer
Autolock
Which option
am I in?
Possible
settings
Off to Max
(rA5)
Off to Max
(Hd5) On or Off On or Off On or Off
Example
setting is 1
setting is 4
setting is 1
setting is 4
On
Off
On
Off
On
Off
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCTX9/User_Guide_DD24SCTX9/11_P…
Updated: Tue, 16 Nov 2021 11:04:07 GMT
Powered by
2

3. Change Setting
• Press
to change the setting within an option. For example, to change the inse aid setting from 4 (factory default) to 2,
you need to press
3 times.
4. Save Setting & Quit Menu
• Press
. This will save the new setting and quit the preference options menu.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCTX9/User_Guide_DD24SCTX9/11_P…
Updated: Tue, 16 Nov 2021 11:04:07 GMT
Powered by
3