Fisher & Paykel DishDrawer DD36STI2 Parts list manual

1.888.936.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DishDrawer™wiDe Dimensions
DD36sDFTX2, DD36sTi2
A I
J
K
G
B
CD
E
Side Plan
H
F
DIMENSIONS INCHES (MM) Designer
DD36SDFTX2
Integrated
DD36STI2
A overall height of product (incl. front panel height) 18 ⁄” (478) 18 ⁄” (478)
B overall width of product 5 ¼” (895) min.  ⁄” (855)
C overall depth of product (excl. handle) 22 ½” (571) 22 ½” (571)
D depth of chassis (to back of front panel) 21 ¾” (55) 21 ¾” (55)
E maximum extension of drawer (excl. handle) 21 ⁄” (545) 21 ⁄” (545)
F depth of front panel (excl. handle) ⁄” (18) ⅝ - ⁄” (16-20)
G height of chassis 18 ⁄” (458) 18 ⁄” (458)
H depth of handle 1 ⅝” (41) n/a n/a
I height of front panel 18 ½” (470) 18 ¾” (476)
J height of ventilation gap below front panel ⁄” (8) min. ⁄” (2)
K height from top of handle to top of front panel 2 ½” (64) n/a n/a
includes ⁄” (2 mm) high bracket slots Assuming panel thickness of ⁄” (18 mm)
Recommended for a ⁄” (2 mm) ventilation gap below front panel, if cavity height is 18 ⅞” (480 mm)

1.888.936.7872
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.fisherpaykel.com
DIMENSIONS INCHES (MM) Designer
DD36SDFTX2
Integrated
DD36STI2
L height of cavity (from support surface to underside of countertop) 18 ⅞” (480) 18 ⅞” (480)*
M inside height of cavity 18 ⅛” (460) min. 18 ⅛” (460)
N inside width of cavity 4” (864) 4” (864)
O overall width of cabinetry 5 ⁄” (900) 5 ⁄” (900)
P inside depth of cavity min. 22 ⁄” (560) min. 22 ⁄” (560)
* Recommended
DishDrawer™wiDe cabineTry Dimensions
DD36sDFTX2, DD36sTi2
Plan
Side
LP
N
O
⁄”
(18mm)
⁄”
(20 mm)
⁄” (2mm)
N
O
Minimum clearances from adjacent cabinetry
min. ½” (13 mm)
clearance from a
corner cupboard
min. ⁄” (2 mm)
clearance to adjacent
cupboard door
M