Fisher & Paykel AeroCare DE7027P User manual

Getting Started Quickly
AeroCare DE7027P, DG7027P
• Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly
in its housing before using your dryer.
• Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the
door. Check the door is fully closed before starting the dryer.
Ensure there is plenty of room for the garments to tumble freely while drying – do not overload your
dryer. Load in terms of the space clothes take up when dry rather than when they are wet.
1. Press POWER to activate your dryer.
2. Your dryer will default to the REGULAR cycle. Select your desired drying cycle by turning the SmartTouchTM
Control Dial.
3. Select your preferred drying options (if you wish to select different options from the default options programmed
for the cycle) using the SmartTouchTM buttons on the right hand side of the panel.
4. Touch the START/PAUSE button to start the drying cycle.
Fig.45 AeroCare control panel (DE7027P, DG7027P)
https://producthelp.fisherpaykel.com/us/Dry/Dryers/Vented/DG7027G1/User_Guide_DG7027G1/05_getting_started_quickly
Updated: Sat, 13 Nov 2021 02:37:23 GMT
Powered by
1

The control panel may differ depending on what model of dryer you have.
• If you make an invalid selection the dryer will beep to alert you.
• When the cycle finishes, your dryer will beep to alert you and then turn off automatically. If the WRINKLE FREE
option has been selected the machine will rotate the drum periodically after the end of the cycle, blowing cool air
into the drum to help minimize wrinkling of the clothes.
• If you wish to stop your dryer at any point during a cycle simply touch START/PAUSE to pause the cycle, then
open the door. To restart the dryer, close the door and touch START/PAUSE to resume the cycle.
• If you wish to cancel a cycle or select a different option once a drying cycle has started, touch the START/
PAUSE button then select the new cycle or option. Touch START/PAUSE to restart the dryer with the new
settings.
If you wish to stop the dryer before the cycle has finished you MUST remove the clothes
IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or
bunched up in a clothes basket, these must be spread out in order for the heat to dissipate.
There is a risk of spontaneous combustion. Take extreme care when removing items as
the drum and the load items may be extremely hot.
Failure to follow the advice in this guide may result in damage to your garments and your
expectations of drying performance may not be met.
Selected drying cycles and options may not be available depending on your model of dryer.
https://producthelp.fisherpaykel.com/us/Dry/Dryers/Vented/DG7027G1/User_Guide_DG7027G1/05_getting_started_quickly
Updated: Sat, 13 Nov 2021 02:37:23 GMT
Powered by
2

AeroCare DE7027G, DG7027G
• Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly
in its housing before using your dryer.
• Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the
door. Check the door is fully closed before starting the dryer.
Ensure there is plenty of room for the garments to tumble freely while drying – do not overload your
dryer. Load in terms of the space clothes take up when dry rather than when they are wet.
1. Press POWER to activate your dryer.
2. Your dryer will default to the REGULAR cycle. Select your desired drying cycle.
3. Select your preferred drying options (if you wish to select different options from the default options programmed
for the cycle) using the SmartTouchTM buttons on the right hand side of the panel.
4. Touch the START/PAUSE button to start the drying cycle.
Fig.46 AeroCare control panel (DE7027G, DG7027G)
The control panel may differ depending on what model of dryer you have.
• If you make an invalid selection the dryer will beep to alert you.
• When the cycle finishes, your dryer will beep to alert you and then turn off automatically. If the WRINKLE FREE
option has been selected the machine will rotate the drum periodically after the end of the cycle, blowing cool air
into the drum to help minimize wrinkling of the clothes.
• If you wish to stop your dryer at any point during a cycle simply touch START/PAUSE to pause the cycle, then
open the door. To restart the dryer, close the door and touch START/PAUSE to resume the cycle.
• If you wish to cancel a cycle or select a different option once a drying cycle has started, touch the START/
PAUSE button then select the new cycle or option. Touch START/PAUSE to restart the dryer with the new
settings.
https://producthelp.fisherpaykel.com/us/Dry/Dryers/Vented/DG7027G1/User_Guide_DG7027G1/05_getting_started_quickly
Updated: Sat, 13 Nov 2021 02:37:23 GMT
Powered by
3

If you wish to stop the dryer before the cycle has finished you MUST remove the
clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the
dryer or bunched up in a clothes basket, these must be spread out in order for the heat to
dissipate. There is a risk of spontaneous combustion. Take extreme care when removing
items as the drum and the load items may be extremely hot.
Failure to follow the advice in this guide may result in damage to your garments and your
expectations of drying performance may not be met.
Selected drying cycles and options may not be available depending on your model of dryer.
https://producthelp.fisherpaykel.com/us/Dry/Dryers/Vented/DG7027G1/User_Guide_DG7027G1/05_getting_started_quickly
Updated: Sat, 13 Nov 2021 02:37:23 GMT
Powered by
4