Fisher & Paykel 9 Series User manual

INTEGRATED COLUMNS
RS1884FJ, RS2484FJ, RS3084FJ,
RS2484S & RS3084S models
INSTALLATION GUIDE
US CA
847985C 05.18

1
TABLE OF CONTENTS
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to
our website fisherpaykel.com or contact your local Fisher & Paykel dealer.
1 SAFETY AND WARNINGS
2 INTEGRATED COLUMNS
3 COMPONENTS LIST
4 PRODUCT DIMENSIONS AND SPECIFICATIONS
5 CABINETRY OPTIONS
6 CAVITY DIMENSIONS
7 DOOR AND TOE KICK PANEL DIMENSIONS
8 CUSTOM DOOR PANEL DIMENSIONS
9 DOOR OPENING ROTATION
!0 ELECTRICAL AND PLUMBING
!1 BEFORE INSTALLATION
!2 UNPACKING AND MOVING YOUR PRODUCT
!3 ATTACH THE ANTI-TIP BRACKET
!4 CONNECT TO WATER AND POWER SUPPLY
!7 INSTALL WATER FILTER
OR
!5 SINGLE INSTALLATION !6 DUAL INSTALLATION
OR
!8 INSTALL BRACKETS TO DOOR PANEL
(STAINLESS STEEL)
!9 INSTALL BRACKETS TO DOOR PANEL
(CUSTOM)
@0 INSTALL DOOR PANELS
@1 INSTALL TOE KICK
@2 INSTALL TOE KICK GRILLE
@3 INSTALL CABINET TRIMS
@4 INSTALL FLOW DIVIDER AND DOOR TRIMS
@5 OPTIONAL — CHANGING OVER DOOR HINGES
@6 FINAL CHECKLIST

7
4 PRODUCT DIMENSIONS AND SPECIFICATIONS
RS18 RS24 RS30
PRODUCT DIMENSIONS inches (mm) inches (mm) inches (mm)
AOverall height of product 84” (2134) 84” (2134) 84” (2134)
BOverall width of product 173/4” (451) 233/4” (603) 293/4” (756)
COverall depth of product (excluding front door panel) 24” (610) 24” (610) 24” (610)
PRODUCT SPECIFICATIONS
Door clearance 20” (508mm) 26” (660mm) 32” (813mm)
Weight (including packaging) 260lb (118kg) 302lb (137kg) 344lb (156kg)
Door hinge Hettich K05 Hettich K05 Hettich K05
PROFILE VIEWFRONT VIEW
A
B
C

10
7 DOOR AND TOE KICK PANEL DIMENSIONS
RS18 RS24 RS30
DOOR PANEL DIMENSIONS (STAINLESS STEEL) inches (mm) inches (mm) inches (mm)
AHeight of door panel 79 7/8" (2029) 79 7/8" (2029) 79 7/8" (2029)
BWidth of door panel 173/4” (451) 23 3/4" (603) 29 3/4" (756)
CDepth of door panel (excluding door handle) 3/4” (19) 3/4” (19) 3/4” (19)
DOOR PANEL DIMENSIONS (CUSTOM)*
AHeight of door panel 77 7/8” – 81 7/8” (1978 – 2080) 77 7/8” – 81 7/8” (1978 – 2080) 77 7/8” – 81 7/8” (1978 – 2080)
BWidth of door panel 17 3/4” (451) 23 3/4" (603) 29 3/4" (756)
CDepth of door panel min 5/8” – max 1” (16 – 25) min 5/8” – max 1” (16 – 25) min 5/8” – max 1” (16 – 25)
DOOR PANEL WEIGHT lb (kg) lb (kg) lb (kg)
Maximum weight of Stainless steel/Custom door panel (including handle/brackets)†44lb (20kg) 55lb (25kg) 66lb (30kg)
* Custom door panels to be manufactured and fitted by cabinetmaker.
† Door handle kit is available as an optional accessory for both Stainless Steel door panels and Custom door panels and must be purchased separately.
SINGLE INSTALL DUAL INSTALL
RS18 RS24 RS30 RS18 + RS24 RS18 + RS30 RS24 + RS24 RS24 + RS30 RS30 + RS30
TOE KICK DIMENSIONS inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inches (mm)
DWidth of toe kick
Stainless steel panel/Custom panel 177/8” (454) 23 7/8” (606) 29 7/8” (759) 41 7/8” (1064) 47 7/8” (1216) 47 7/8” (1216) 53 7/8” (1368) 59 7/8” (1521)
EHeight of toe kick#
Stainless steel panel 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102) 4” (102)
Custom panel** 2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
2”–6”
(51–152)
FDepth of toe kick (measured from
front of door)
Stainless steel panel/Custom panel 27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
27/8”–4”
(73–102)
#Standard toe kick height is 4” (102mm) with the optional Stainless door panel. For Custom door panel installation, a custom toe kick 2” –6” (50 – 152mm) can be manufactured and fitted by cabinetmaker. The Custom door panel height needs
to be adjusted accordingly.
** Extra lower grilles are required for a 2” (50mm) toe kick installation.

12
8 CUSTOM DOOR PANEL DIMENSIONS
Custom door panel dimensions
Dimensions apply for the preparation and installation of Custom door
panels. For Dwg and Dxf files of the below panel preparation download the
folder on http://thekitchentools.fisherpaykel.com
IMPORTANT!
●The thickness of the custom door panel can vary provided that the screws
do not penetrate beyond the full depth of the door panel. Refer to ‘Door
panel dimensions (Custom)’ table on page 10 for thickness limitations of
door panel.
●Measurements of screw hole locations can vary depending on the height
of toe kick 2”–6” (50–152mm).
11/4” (33mm)
23/8” (60mm)
7/8” x Ø1/8”
(22mm x Ø2mm)
29 3/4” (756mm)
3/4” (20mm) 31/2” (90mm)
2” (51mm)
8” (203mm)
147/8” (378mm)
5” (127mm)
2” (50mm)
2” (50mm)
20” (508mm)
50” (1270mm)
70” (1778mm)
77 7/8” – 81 7/8” (1978 – 2080mm)
Do not place handle holes in
marked areas to avoid clashing
with panel attachment brackets
RS30
2” (50mm)2” (50mm)

13
8 CUSTOM DOOR PANEL DIMENSIONS
233/4” (603mm)
11/4” (33mm)
2” (50mm) 2” (50mm) 2” (50mm) 2” (50mm)
77 7/8” – 81 7/8” (1978 – 2080mm)
70” (1778mm)
50” (1270mm)
20” (508mm)
5” (127mm)
Do not place handle holes in
marked areas to avoid clashing
with panel attachment brackets
2” (51mm)
8” (203mm)
117/8” (302mm)
RS24
23/8” (60mm)
3/4” (20mm) 31/2” (90mm)
7/8” x Ø1/8”
(22mm x Ø2mm)
77 7/8” – 81 7/8” (1978 – 2080mm)
70” (1778mm)
50” (1270mm)
20” (508mm)
5” (127mm)
2” (50mm)
87/8” (225mm)
2” (51mm)
Do not place handle holes in
marked areas to avoid clashing
with panel attachment brackets
11/4” (33mm)
173/4” (450.8mm)
2” (50mm)
2” (50mm)
2” (50mm)
RS18
3/4” x Ø1/8”
18mm x Ø2mm
23/8” (60mm)
3/4” (20mm) 31/2” (90mm)

14
9 DOOR OPENING ROTATION
RS18 RS24 RS30
DOOR OPENING AND CLEARANCE DIMENSIONS inches (mm) inches (mm) inches (mm)
AWidth of door (90° open) measured from front of door 20” (508) 26” (660) 32” (813)
bMinimum door clearance* to adjacent wall** (115° — full internal access) 11 1/2” (292) 14” (356) 16 1/2” (419)
cMinimum door clearance* to adjacent wall** (90° — reduced internal access) 4 5/16” (110) 4 5/16” (110) 4 5/16” (110)
* Measured from front cabinetry edge.
** Does not include the Custom door panels or handles to be manufactured and fitted by cabinetmaker.
For 90° door swing a hinge limiting bolt is supplied with your
appliance. This pin fits in the boreholes of the top hinge (Z).
WARNING!
●Before opening the doors, ensure that the appliance is stable.
●Follow these instructions to avoid risks that can cause serious
injury or death.
1Open door to 90°.
2Align the hinge limiting bolt vertically with the bore hole.
3Insert the pin through the bore hole. Use a hammer to drive the pin
through the hole.
115° DOOR OPENING
(FULL ROTATION)
90° DOOR OPENING
B
AA
C
Wall Wall
Z

16
!1 BEFORE INSTALLATION
IMPORTANT!
●Ensure your appliance is not exposed to any heat generating appliance eg cooktop, oven or dishwasher.
●The appliance has front and rear rollers for moving the appliance forward and backward. Do not move the appliance sideways to avoid damaging the rollers or the floor covering/surface.
●The appliance must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection and water leaks.
●All connections for water, electrical power and grounding must comply with local codes and ordinances and be made by licensed personnel when required.
●Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
●Ensure the appliance is installed properly. Improper installation that results in appliance failure is not covered under the appliance warranty.
Check the installation location
Check the cabinetry
●Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).
●Ensure that the ventilation openings in the cabinetry are clear of obstruction.
Check the power supply connection
●Ensure that there is a separate power outlet for each appliance.
●Avoid sharing the power point with other appliances to prevent accidental switching off of the appliance.
●For power requirements, please refer to the information on the serial plate.
●Ensure your appliance is properly grounded (earthed).
●Connect your appliance to an electrical supply with the fitted plug and lead.
●We recommend to use an isolating switch that is easily accessible to the user after the appliance is installed.
Check the water supply connection (for Freezer models only)
●We recommend connecting the hose to exit at an angle if there is not enough clearance between the cabinet wall and back of appliance.
●Fisher & Paykel is not liable for damage (including water damage) caused by faulty installation or plumbing.
Check your appliance
●Ensure that your appliance is the correct model as per your order.
●Ensure that the packaging is not damaged upon delivery.
●Check that the components and install kits are complete.
●You have the option to change the door hinge side of your appliance from right hand hinge to left hand hinge or vice versa.
A hinge change kit is required for this installation. Refer to ‘Optional — Changing over door hinges’ for more information.