Fisher-Price RESCUE HEROES K9699 User manual

Model Number: K9699
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Requires three “AA” (LR6) alkaline batteries (not included).
www.rescueheroes.com
Figure sold separately and subject to availability.

2
Attaching the Light Bar
• Carefully feed the wires attached to the bottom of the light bar down into
the slot in the car. Fit the tabs on the bottom of the light bar into the slots
in the top of the car.
• Press down on the light bar to "snap" it in place.
2
Light Bar
1
(Other #1
on opposite
door)
(#2 On opposite side)
3
10
15
16
17
14
4
12
7
68913
5
14
Smaller
Wheel
Larger
Wheel
11
• Before applying labels, wipe the surface of the toy with a clean, dry cloth
to remove dust or oils. Apply the labels as shown in the illustration.
For best results, avoid repositioning a label once it has been applied.
Attaching the Wheels
• Insert and “snap” both larger wheels onto the back axles.
• Insert and “snap” both two smaller wheels onto the front axles.
One-time assembly is now complete.

3
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Locate the battery compartment door on the bottom of car.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three, “AA” (LR6) alkaline batteries.
• Replace the battery compartment door and tighten the screw with a
Phillips screwdriver. Do not over-tighten.
• When lights or sounds from this toy become faint or stop, it’s time for an
adult to change the batteries!
Hint: We recommend using alkaline batteries for longer battery life.
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the toy (product). Dispose of batteries safely.
Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy (product) before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.

• Lift the windshield on the vehicle.
• Slide the connector on the back of any Rescue Heroes® figure (sold
separately and not included) into the slot on the back of the seat.
• Return the windshield to its normal position.
4
Windshield

5
Press to
Press to
Launch Cuffs
Launch Cuffs
Lift for Storage
Press Buttons for
Lights and Sound
Lights and Sounds
• Locate the power switch on the bottom of the toy.
• Slide the switch to on to turn the toy on. When you're finished, slide
the switch to off .
• Press the buttons on the light bar for lights and sound effects.
Cuff Launcher
• To load the cuffs, grasp the key on the end of the cord near the back
bumper and pull the cord back through the launcher until the cuffs lock
in place.
• Press the release button on the hood to launch the giant handcuff.
Important! Only use projectile supplied with this toy. Do not launch at
people or animals at point blank range.

• Wipe with a clean cloth dampened with a mild soap and water solution.
Do not immerse this toy.
Call our Consumer Relations Department, toll-free at 1-800-432-5437,
9 AM - 7 PM EST Monday through Friday and 11 AM - 5 PM EST Saturday.
Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470. Write to us at: Fisher-Price® Consumer Relations, 636
Girard Avenue, East Aurora, New York 14052.
PRINTED IN CHINA K9699pr-0920
(United States Only) This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
Visit us on line at www.service.fisher-price.com
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303; www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,Tsimshatsui, HK, China.