Fisher-Price Animals of the Rainforest 10FP0505 User manual

IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT. KEEP FOR FUTURE REFERENCE
ADULT ASSEMBLY IS REQUIRED
NO TOOLS NEEDED FOR ASSEMBLY
Animals of the Rainforest™ Stroller
www.fisher-price.co.uk
10FP0505

Safety Warnings Getting to Know Your Stroller
Harness
Secondary release
lock
Storage clip
Primary release
lock
Brake levers
Front swivel
wheel levers
Calf rest
Shopping basket
Backrest release
toggle
Hood adjustment
catch
Thank you for choosing OBABY. To ensure that your stroller is used in accordance with
these instructions, please read them fully.
This stroller conforms to EN 1888:2003 and is guaranteed for 12 months from the date of
purchase against manufacturing defects. If, however you have any problems, please
contact your OBABY retailer from whom you purchased your product, who will take
appropriate action.
Your child’s safety may be affected if you do not follow these
instructions.
WARNING: A child’s safety is your responsibility
WARNING: Ensure that all locking devices are engaged before use
WARNING: Children should be harnessed in at all times
WARNING: Always use the crotch strap in combination with the
waist belt
WARNING: Any load attached to the handles affects the stability of
the pram / pushchair
WARNING: This product is not suitable for running or skating
WARNING: It may be dangerous to leave your child unattended
WARNING: The child should be clear of moving parts while making
adjustments or opening or folding the stroller. Risk of serious injury
(entrapment, laceration or amputation) exists
WARNING: When using the raincover, regularly check your child has
adequate ventilation and is not overheating.
Unless it is raining, the raincover should be removed.
• A basket is provided for the carriage of other items up to a maximum
permissible weight of 3 kg. Where a hood parent pocket is provided,
an additional 1kg maximum permissible weight can be used within this
• This stroller is intended to carry one child from birth and up to a
maximum weight of 15kg
ROUTINE CARE & MAINTENANCE
- This stroller requires regular maintenance by the user
- It may be unsafe to use replacement parts or accessories e.g. child
seats, bag hooks, rain covers, etc, other than those approved by the
manufacturer or distributor.
- For cleaning, use only a mild detergent and warm water
- DO NOT USE BLEACH
- DO NOT USE any abrasive substances
- From time to time, check your stroller for loose screws, worn parts,
torn material or stitching. Replace or adjust the parts as needed.
Due to constant updating and improvements, some components may occasionally differ slightly from the images
shown in these instructions. We reserve the rights to change the specications of any products without prior notice. If
you need any assistance please contact your OBABY retailer from whom you purchased your product, who will take
appropriate action.
23
www.obaby.co.uk www.obaby.co.uk

Opening Your Stroller Folding Your Stroller
Before attempting to fold YOUR stroller:
- The front wheels should be locked in place
- The basket and seat unit should be empty
- The hood should be folded
- The seat should be fully upright
To fold the stroller, release the primary lock, at the back of the stroller by pushing in the
spring loaded button, while lifting the lever underneath (g.7). Then lift the whole catch
upwards slightly using your hand.
Next, using your foot press down on the secondary lock at the right hand side of the
stroller (g.8). Then push the handles forwards and down towards the front wheels
(g.9), until completely folded (g.10). Engage the storage clip on the front leg of the
stroller (g.11).
g. 1
g. 4 g. 10g. 5 g. 11
g. 7
g. 2
g. 6
g. 8
g. 3 g. 9
1.Press
2.Lift
3.Lift Press
Press
Lift
“Click”
To open your stroller release the storage clip on the side of the stroller (g.1 & 2).
Lift the handles away from the wheels (g.3).
Using your foot push down on the primary release lock at the back of the stroller (g.4).
Ensure the lock clicks into place (g.5 & 6).
WARNING: Ensure that all locking devices are engaged before use
45
www.obaby.co.uk www.obaby.co.uk

Fitting and Removing the Front Wheels
g. 12 g. 13 g. 14
Using the Front Swivel Wheels
To lock the swivel wheels, rst ensure the front wheels are facing forward inline with the
chassis, then lift the lever up (g.15).
To put the wheels in swivel mode, push the lever down on the front of each front wheel
(g.16 & 17).
g. 15 g. 16 g. 17
Adjusting the Backrest
Applying the Brakes
g. 18 g. 19
Lock
Release
Release
Lock
To t the front wheels, push the wheels onto the front legs until they click into place.
To Remove, Pull both clips apart whilst pulling the wheel off the leg.
g. 20
Pull Clips Apart
g. 21 g. 22 g. 23
1.Press
2.Pull
To recline the backrest, press the button on the toggle and pull away from the seat to the
desired height (g.21). Lower the seat to rest on the toggle (g.22).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (g.23).
To lock the brakes fully, push down on each brake lever using your foot (g.18 & 19).
To release the brakes, lift each brake lever using your foot (g.20).
Apply the brake before putting your child into the pushchair.
Apply the brake when the pushchair is stationary.
“Click”
67
www.obaby.co.uk www.obaby.co.uk

Fitting and Removing the Hood
Adjusting the Hood
g. 24
g. 27
g. 25
g. 28
g. 26
g. 29
To open or close the hood, pull or push the hood, as shown. (g.27-29).
g. 30
g. 33
g. 31
g. 34
g. 32
g. 35
Using the Harness
Squeeze
To t the hood, place the hood on the chassis, inline with the seat unit. Clip the hood
catches onto each side of the chassis (g.24-26). Ensure the clip ts into the Locating
hole on the chassis frame, this stops the hood clip from sliding.
To remove the hood, do the reverse of the above.
Waist
Strap
Crotch
Strap
Shoulder
Strap
Clasp
‘D’ Ring
89
www.obaby.co.uk www.obaby.co.uk
g. A
Harness
Positions
Lower
Inner
Inner
Outer
Outer
Outer
Upper
To fasten the harness, insert each waist strap fastener
through the loop on each shoulder strap (g.30). Then
insert both waist strap fasteners into the clasp on the
crotch strap (g.31 & 32).
To release the harness, squeeze each of each clips in the
centre of the harness and pull away from the clasp, one at
a time (g.33).
Adjust the harness length using the buckles on each strap
(g.34).
‘D’ Ring
The ‘D’ rings highlighted are provided for tting a separate
harness complying with BS 6684 (g.35).
When using the safety harness from birth, it may be necessary to use the lower holes for
the shoulder strap and the inner holes for the waist straps and crotch strap.
Higher holes for the shoulder strap and outer holes for the waist straps and crotch strap
should be used when your child is of a suitable size. (See g.A)
WARNING: Always use the crotch strap in combination with
the waist belt

g. 36 g. 37 g. 38
Adjusting the Calf Rest
Press
To adjust the calf rest press the levers either side of the seat and lift or lower to the
correct position (g.36-38).
g. 39 g. 40 g. 41
Fitting the Raincover
To t the raincover, place the raincover over the stroller and allow the raincover to drape
over the front of the stroller.
Secure in place using the fastener straps on the back of the raincover (g.39) and
fastener straps onto the front legs of the stroller (g.40 & 41).
WARNING: When using the raincover, regularly check your child has adequate
ventilation and is not overheating.
Unless it is raining, the raincover should be removed.
10
www.obaby.co.uk www.obaby.co.uk

FISHER-PRICE and associated trademarks are owned by Mattel, Inc.
and used under license from Mattel Europa B.V.
© 2011 Mattel, Inc. All Rights Reserved.
MADE IN CHINA.
Manufactured for and distributed by:
Consumer inquiries directed to:
Tel: [phone]
Email: [e-mail]