Fitness Reality 2804.1-022316 User manual

Bench
IMPORTANT: Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to change
without notice.
2804.1-022316

SERVICE ------------------------------------------------------------------------ 2
LABEL PLACEMENT --------------------------------------------------------- 3
PRODUCT SAFETY ---------------------------------------------------------- 4
OVERVIEW DRAWING ------------------------------------------------------ 5
PART LIST ---------------------------------------------------------------------- 6
HARDWARE PACK ---------------------------------------------------------- 7
ASSEMBLY ----------------------------------------------------------------------8
ADJUSTMENT ----------------------------------------------------------------- 11
WARRANTY -------------------------------------------------------------------- 13
PARTS REQUEST FORM--------------------------------------------------- 14
1
TABLE OF CONTENTS

IMPORTANT: FOR NORTH AMERICA ONLY
For damaged, defective products, questions, replacement parts, or any
other service support, please contact our customer service department
(8:00 AM - 5:00 PM Pacific Standard Time, Daily) by the below methods:
For Best Service, please Email:
[e-mail]
Response Time: 1-2 Business Days
Website:
www.paradigmhw.com
Toll-Free:
1-844-641-7920
Response time may vary.
Please have the following information ready when requesting for service:
Your name
Phone number
Model number
Serial number
Part number
Proof of Purchase
For damaged or defective products please contact our customer service
before returning to the store.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA
SERVICE
2

3
LABEL PLACEMENT

WARNING: Before using this equipment you should consult with your physician to see if this
Bench is appropriate for you. Do not use this equipment without your physician’s approval.
Do not use this equipment if you have any of the following conditions or ailments:
Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Modularly pins, or Surgically
implanted orthopedic supports
Use of anti-coagulants including Aspirin in high doses
The Maximum Weight Capacity for this product is 800lbs / 363kgs.
Read all instructions carefully before assembling or operating this product. Retain this
owner’s manual, do not remove any safety labels from the machine and keep the original
purchase receipt for future reference.
This Bench was designed and built for optimum safety. However, certain precautions apply
whenever you operate this exercise equipment. Be sure to read the entire manual before
assembling and operating this equipment. Also, please note the following safety instructions:
1. Consult your physician or other health care professionals before using this Bench.
2. Always wear proper exercise apparel when using this equipment. Use care when getting on or
off the unit.
3. If at any time you feel faint, light-headed, or dizziness while operating this equipment, stop
exercising immediately and contact your physician. You should also stop exercising if you are
experiencing pain or any kind of discomfort.
4. Keep children and pets away from this equipment at all times.
5. Only one person should use this equipment at a time.
6. Make sure your equipment is correctly assembled before you use it. Be sure all screws, nuts,
and bolts are tightened prior to use. Check screws, nuts, and bolts are tight on a weekly basis.
7. Do not operate this or any exercise equipment if it is damaged.
8. Wait 2 hours after eating before using this exercise equipment. If you get nauseous, stop
exercising as soon as you feel queasy.
9. This product should be placed on a flat surface when using. A mat or other covering material
on the ground is recommended. For indoor use only, do not use outdoors or near water.
10. Keep hands and feet away from any moving parts. Do not insert any objects into any
openings on the equipment.
11. Keep loose clothes, jewelry, limbs and long hair away from moving parts.
12. Children under the age of 12 should not use this fitness equipment.
13. Children from 12 to 18 should have adult supervision.
PRODUCT SAFETY
4

OVERVIEW DRAWING
5

Part #
Description
Q'ty
A
Main Frame
1
B
Front Support Tube
1
C
Front Stabilizer
1
D
Rear Stabilizer
1
E
Rear Support Tube
1
F
Backrest Support Tube
2
G
Leg Holder
1
H
Seat
1
J
Backrest
1
2
Hex Bolt M8x20mm
4
28
Hex Bolt M8x50mm
4
29
Carriage Bolt M8x60mm
4
30
Hex Bolt M12xL90
1
60
Flat Washer Ø12xØ24x2
4
61
Spring Washer Ø8
13
62
Flat Washer Ø8xØ16x1.5
8
63
Curved Washer Ø8xØ21x2
4
64
Flat Washer Ø8xØ25x2
1
76
Nylon Nut M12
3
79
Cap Nut M10
4
105
Pin Ø10x100
1
106
Round Knob M8x40mm
1
133
Wheel End Cap Ø50mm
2
134
Stability End Cap Ø50mm
2
135
Round End Cap Ø32
2
136
Round End Cap Ø19
2
159
Rectangle End Cap 30x60m
1
160
Square End Cap 30x30m
4
211
Hand Grip Ø19x75x3
2
212
Leg Hold Grip Ø32x168x3t
2
230
Plastic Washer Ø12xØ24x2
2
296
Threaded Shaft Ø12x160m
1
484
Bumper Ø12x22x2
1
PART LIST
6

7
HARDWARE PACK
(#29) Carriage Bolt
4 PCS
(#79) Cap Nuts
4 PCS
(#61) Spring Washer
4 PCS
(#63) Curved
Washer
4 PCS
(#106) Round Knob
1 PC
(#64) Flat Washer
1PC
(#61) Spring Washer
1PC

Opening the Bench:
1. Rest the Bench on its right side and pull the Pin (105) out from the bracket on the Main
Frame (A).
2. Pull the Front Support Tube (B) forward and completely reinsert the Pin (105) into the
first hole on the bracket of Main Frame (A).
STEP 1
8

Installing the Front Stabilizer (C) with Stability End Caps (134):
1. Lift up the Front Support Tube (B), and then align the Front Stabilizer (C) holes with the
holes on the front curve of the Front Support Tube (B). The square holes of the Front
Stabilizer (C) should point towards the floor.
2. Insert Two Carriage Bolts (29) into the square shaped holes of the Front Stabilizer (C)
until the threads reach all the way through to the other side and come out of the front
curve of the Front Support Tube (B).
3. Attach two Curved Washers (63), two Spring Washers (61), and two Cap Nuts (79) to the
threaded side of the two Carriage Bolts (29).
4. Tighten the Cap Nuts (79) with the 14 mm Multi Hex tool provided.
Installing the Rear Stabilizer (D) with Wheel End Cap (133):
1. Lift up the Rear of Main Frame (A), and then align the Rear Stabilizer (D) holes with the
holes on the rear curve of the Main Frame (A). The square holes of the Rear Stabilizer (D)
should point towards the floor and The CUSTOMER SERVICE stickers facing upward.
2. Insert Two Carriage Bolts (29) into the square shaped holes of the Rear Stabilizer (D) until
the threads reach all the way through to the other side and come out of the rear curve of
the Main Frame (A).
3. Attach two Curved Washers (63), two Spring Washers (61), and two Cap Nuts (79) to the
threaded side of the two Carriage Bolts (29).
4. Tighten the Cap Nuts (79) with the 14 mm Multi Hex tool provided.
Hardware:
STEP 2
9
(#29) Carriage Bolt
4 PCS
(#79) Cap Nuts
4 PCS
(#61) Spring Washer
4 PCS
(#63) Curved
Washer
4 PCS
Multi Hex tool with
Philips screw drivers

Installing the Leg Holder:
1. On to the threaded shaft of the Round Knob (106) first place a Spring Washer (61)
followed by a Flat Washer (64).
2. Insert the threaded shaft of the Round Knob (106) into one of the three Available holes
on the underside of the Front Support Tube (B) until the threads are visible on the front
side of the Front Support Tube (B).
3. Align the Threaded hole on the backside of the Leg Holder (G) with the Treaded Shaft of
the Round Knob (106) that is sticking out from the hole on the front side of Front
Support Tube (B).
4. Tighten the Round Knob (106) by turning it clockwise until the Leg Holder (G) is firmly
secured to the Front Support Tube (B).
Hardware:
STEP 3
(#106) Round Knob
1 PC
(#61) Spring Washer
1 PC
(#64) Flat Washer
1PC
10

Adjusting the Front Support Tube (B):
1. Pull the Pin (105) out from the Main Frame (A) and swing the Front Support Tube (B) into
one of the following positions:
a. Position P1 gives a flat and level seat for working out.
b. Position P2 gives an inclined seat for working out.
c. Position P3 is for folding up the Bench for storage.
Completely re-insert the Pin (105) into the hole of the bracket on the Main Frame (A) for
the position you select.
Adjusting the Backrest (J):
1. Lift the Rear Support Tube (E) off of tabs that run along the shaft of Main Frame (A)
2. Gently lower the Backrest (J) while holding the Rear Support Tube (E) up and off of the
Main Frame (A).
3. Select a position and rest the Rear Support Tube (E) against the Main Frame (A).
ADJUSTMENT
11
105

Adjusting the Stability End Cap (134):
1. If the Bench is unsteady and shakes, turn the Stability End Caps (134) on the Front
Stabilizer (C) until you find a position that does not allow the Bench to wobble or shake.
ADJUSTMENT
12
134

MANUFACTURER’S LIMITED WARRANTY
Paradigm Health & Wellness warrants to the original purchaser that this product is free
from defects in material and workmanship when used for the purpose intended, under the
conditions that it has been installed and operated in accordance with Paradigm’s Owner’s
Manual. Paradigm’s obligation under this warranty applies to the following:
COMPONENT LENGTH OF WARRANTY
Structural Frame 1 year
All Other Components 90 days
(computer display, electronics, upholstery, foam, ball bearings, pulleys, belts, cables,
wires, shocks, covers, tension, internal mechanism, wheels, pedals, knobs, accessories
and hardware)
Exclusions from Warranty Coverage:
Paradigm does not warrant against and is not responsible for, and no implied warranty shall be deemed to cover, any
product failure, product malfunction, or damages attributable to:
1. Improper installation and/or failure to abide by Paradigm’s installation guidelines;
2. Use of this product beyond normal home use, or in an application for which it was not designed;
3. Cosmetic items such as scratches, dents or discolorations;
4. Damage caused by normal wear and tear, vandalism, and accidental or by animals;
5. Any act of Nature (such as fire, flooding, snow, ice, hurricane, earthquake, lightning or other natural disaster),
environmental condition (such as air pollution, mold, mildew, etc.), or staining from foreign substances (such as dirt,
grease, oil, etc.);
6. Normal weathering due to exposure to sunlight, weather and atmosphere which can cause colored surfaces to,
among other things, flake, chalk, or accumulate dirt or stains; or
7. Improper operation, alteration, handling, storage, abuse or neglect of the products.
Paradigm, using its sole discretion, will either repair or replace free of charge any part(s)
proven to be defective under normal home use. Any repair or replacement shall provide
no new warranty coverage, but shall retain only the remaining portion of the original
product’s warranty. All exchanged parts and Products replaced under this limited warranty
will become the property of Paradigm Health and Wellness. This warranty is offered only to
the original purchaser and is not transferable. Proof of original purchase is required.
Ordering Replacement Parts
Replacement parts can be ordered by emailing our customer service department:
[e-mail]
Open Daily 8:00 AM - 5:00 PM (PST).
When ordering replacement parts please have the following information ready:
1. Owner’s Manual
2. Model Number
3. Description of Parts
4. Part Number
5. Date of Purchase
WARRANTY
13

Paradigm Health & Wellness, Inc.
EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO
[e-mail] *
NAME: _______________________________________________________
ADDRESS: ____________________________________________________
CITY ______________ STATE ______________ ZIP ___________________
TELEPHONE: (Day) _____________________________________________
(Night) ____________________________________________
SERIAL#: _____________________________________________________
MODEL#: _____________________________________________________
PURCHASE DATE: ______________________________________________
PLACE OF PURCHASE: _________________________________________
“YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”
*This form can also be faxed to #: 626-810-2166
PART #
DESCRIPTION
QTY
PART REQUEST FORM
14