3
Congratulations on your purchase of a Jumbo
Touch Panel “JBT” series flavoring system!
This manual goes over the different settings
and options associated with your new Jumbo
Touch Panel. For operations and maintenance
instructions on the Flavor Burst equipment
itself, please refer to your model’s complete
Operations Manual.
The Jumbo Touch Panel is a large interactive
touch panel. Not only does it control basic
dispense functions from this screen, it is also an
advertising tool used to attract customers.
Images, information and videos can all be
displayed on this screen. The Jumbo Touch
Panel is customizable for serving sizes, flavor
names, and more. The JBT-80FCB-2S fits the
2-barrel Taylor C300. The JBT-80FCB-3S fits
the 3-barrel Taylor C303. The JBT-80FCB-4S
fits the 4-barrel Taylor C314 and C302 freezer.
Your Jumbo Touch Panel also operates many
of the clean-in-place functions of your
equipment. You can clean out the spout with
sanitizer solution at the push of a button on the
screen. When the flavor lines are connected to
the sanitizer tank, it flushes the insides of the
lines, pumps and fitments with sanitizer
solution.
Most of the system’s operations and even
maintenance functions are operated by the
panel, so becoming familiar with it and
understanding all of the available options is
important. This manual will walk you through
each section and explain each feature.
NOTE: EQUIPMENT AND PRODUCT
IMAGES IN THIS MANUAL MAY DIFFER
FROM YOUR CURRENT SETUP.
HOWEVER, THE INFORMATION AND
INSTRUCTIONS CONCERNING THE JUMBO
TOUCH PANEL APPLY TO MOST
FREEZERS, FLAVOR BURST EQUIPMENT,
AND FROZEN PRODUCTS.
Always follow these safety precautions when
operating the Flavor Burst® system:
DO NOT operate the system without
reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the
door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.
The JB cabinet system must be placed
on a level surface capable of supporting at least
220 lbs of weight. Failure to comply may result
in personal injury or equipment damage.
DO NOT install the unit in an area where
a water jet could be used, and do not use a
water jet to clean or rinse the system. Failure to
follow these instructions may result in serious
electrical shock.
NOISE LEVEL: Airborne noise emission does
not exceed 70 dB(A) when measured at a
distance of 1.0 meter from the surface of the
machine and at a height of 1.6 meters from the
floor.
NOTE: Operations Manual subject to
change. Contact your local distributor for most
recent updates concerning the JB system.
INTRODUCTION SAFETY PRECAUTIONS
