Flexwatch FW5071 User manual

FW5071 User’s Manual
M4047-01 １
１１
１ Seyeon Tech Co., Ltd
FW5071 User’s Manual
(Product Guide)
Version 4.14
April 1 , 2012
Class A Digital Device (industrial & commercial environment)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

FW5071 User’s Manual
M4047-01 ２
２２
２ Seyeon Tech Co., Ltd
FW5071 User’s Manual
Document Part Number: M4047-01
Document Version: 4.14
Revised: April 1 , 2012
About This Document
This document is prepared for users of FW5071 supplied by Seyeon Tech Co., Ltd. It is assumed that the
users are familiar with Microsoft Windows operating systems and Web browsers such as Internet Explorer.
It is also assumed that the users are well aware of how to install and use the network equipment such as
LAN, Hub, router, and having basic knowledge of network terminologies. If you have any questions
regarding network installations, please contact your network equipment vendor or network administrator
or Internet service providers.
For updated contents, detailed features and other applications from Seyeon Tech, please refer to the user’s
manual in CD-ROM provided with the product you purchased, or visit Seyeon Tech’s Internet homepage at
http://www.flexwatch.com/.
Copyright otice
Copyright © 2012 Seyeon Tech Co., Ltd. All rights reserved.
No part of this document may be reproduced in any form or by any means without the prior written
permission of Seyeon Tech Co., Ltd.
Disclaimer
Seyeon Tech Co., Ltd. (Seyeon Tech) Makes no representations or warranties with respect to the contents
hereof. In addition, information contained herein is subject to change without notice. Every precaution has
been taken in the preparation of this manual, nevertheless, Seyeon Tech assumes no responsibility for
errors or omissions or any damages resulting from the use of the information contained in this document.
Trademarks
FlexWATCH
®
and FlexWATCH
®
Logo are trademarks of Seyeon Tech Co., Ltd.
Windows and Internet Explorer are a trademark of Microsoft Corporation.
All other trademarks belong to their respective owners.
Technical Support
For technical support call, email, or visit our web site.
Telephone: [phone]~1
Email: [email protected]
Web site: http://www.flexwatch.com or http://www.seyeon.co.kr

FW5071 User’s Manual
M4047-01 ３
３３
３ Seyeon Tech Co., Ltd
Contents
1. PRODUCT OVERVIEW ......................................................................................................................... 4
1.1. FW5071 .......................................................................................................................................................................... 4
1.2. K EY F EATURES ................................................................................................................................................................. 5
1.3. S PECIFICATION FOR FW5071 ...................................................................................................................................... 6
1.4. FW5071 P ACKING L IST ................................................................................................................................................ 8
2. HARDWARE DESCRIPTION ................................................................................................................ 9
2.1. FW5071 F RONT V IEW .................................................................................................................................................. 9
2.2. FW5071 R EAR V IEW .................................................................................................................................................. 10
2.2.1. COM Port Description ...................................................................................................................................... 11
3. FW5071 INSTALLATION AND BASIC SETUP ................................................................................. 12
3.1. B EFORE I NSTALLATION ................................................................................................................................................. 12
3.2. F ACTORY D EFAULT S ETTINGS ..................................................................................................................................... 12
3.3. I NSTALLING FW5071 .................................................................................................................................................. 12

FW5071 User’s Manual
M4047-01 4 Seyeon Tech Co., Ltd
1. Product Overview
1.1. FW5071
FlexWATCH® 5071 is a standalone, pure network video recorder which saves, transmits real-time
video from FlexWATCH(Network Video Server, Network Camera) over TCP/IP network.
It can transmit up to 120fps@HD over the existing network. You can monitor video of FW5071 through
web browser(ie. MS Internet Explorer), if FW5071 is connected to network. Saving & search is possible as
well with HDD equipped.
FW5071 supports video compression MJPEG, and H.264 simultaneously so that user can choose
appropriate video compression for the purpose. A hard drive is equipped inside FW5071 so the video
streams can be recorded and searched per user’s need. The recording can be kept enabled all the time, or it
can also be initiated by motion-detection, sensor input, or time scheduling. The searching feature provides
various search conditions that can be combined together for efficiency.
Picture 1 : FW5071

FW5071 User’s Manual
M4047-01 5 Seyeon Tech Co., Ltd
1.2. Key Features
 Standalone device built-in web server
 10M/100M/1000M Auto-Sensing Ethernet
 Configuration and control device through Web browser
 Max 120 fps transmission speed on TCP/IP network
 Effective Bandwidth & Bit-rate Control (VBR/CBR) by H.264
 Support Dynamic IP network by IPCCTVDNS Server
 Support various PTZ (Pan/Tilt/Zoom) devices
 Support Transparent Mode
 Encryption function by user authentication
 Network server adding, saving
 Encryption function by user authentication
 Image transmission function via FTP and Email
 User-friendly GUI for playback & export Video as AVI file
 Record Video by motion event

FW5071 User’s Manual
M4047-01 6 Seyeon Tech Co., Ltd
1.3. Specification for FW5071
Hardware
32bit Embedded CPU
Flash 8Mbytes /SDRAM: DDR2 128Mbytes
Linux version 2.6.24.4 operating system
Battery backed up real-time clock
Video compression MJPEG MPEG-4
H.264
Recording
2 Step frame rate (Fast on event/Slow on continuous recording mode)
Supports Linux File system
Supports max 2 Tera SATA HDD
Anti-shock system
Transmission or Recording
(Single Mode)
Performance(1000Base-T / LAN)
Trans : 120fps(NTSC)/100fps (PAL)
Rec : 120fps(NTSC)/100fps (PAL)
when Single Mode with total channels at HD
Transmission and
Recording
(Duplex Mode)
Performance(1000Base-T / LAN)
Trans : 120fps(NTSC)/100fps (PAL)
Rec : 120fps(NTSC)/100fps (PAL)
when Duplex Mode with total channels at HD
Transmission and
Recording and Playback
(Triplex Mode)
Performance(1000Base-T / LAN)
Trans : 120fps(NTSC)/100fps (PAL)
Rec : 120fps(NTSC)/100fps (PAL)
when Triplex Mode with total channels at HD
LAN interface 10/100/1000 BaseT Ethernet auto sensing
Serial Interface One serial ports for console, modem(PSTN & GSM), serial input/output device, COM Port is RS-232,
Max Baudrate: 115200 bit/s
Management Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser
Developer support Provides HTTP CGI API
ActiveX control development kit
PWR Consumption
DC 12Volt
Max or Peak: 1.8 A
Normal : 1.0 A
(with Seagate Barracuda ES.2 1000Gbyte)
Operating Environment Temperature : 32°~ 122°F (0°~ 50°C)
Humidity : 20 ~ 80% RH(non-condensing)
Miscellaneous Work with Smart NVR(CMS software)
Dynamic IP support through IPCCTVDNS Server
Users Live-cast for up to 16x8 Channel
Playback for up to 16 clients
Installation, management
and maintenance Installation CD and web-based configuration Firmware upgrades over HTTP, telnet & FTP, firmware available at homepage

FW5071 User’s Manual
M4047-01 7 Seyeon Tech Co., Ltd
Video access from Web
browser Video access from Web browser
Minimum Web browsing
requirements
Pentium 4, 2 GHz, 2GB(RAM) or higher
Video Card: 256MB RAM, 1024x768 resolution or higher
100Mbps Network Adaptor or faster
Windows XP Pro or later
Internet Explorer 6.x or later
System integration support
Powerful API for software integration available at http://www.flexwatch.com, including
Simple Viewer API, FlexWATCH Control SDK, event trigger data in video stream,
embedded scripting and access to serial port peripherals over HTTP/TCP
User can be installed user program daemon for event notification or sending image.
Embedded operating system: Linux 2.6
Supported protocols HTTP, TCP/IP, FTP, Telnet, RARP, PPPoE, PAP, CHAP, DHCP, NTP, SMTP client
Approvals
KCC
FCC : Class A
CE : Class A
RoHS
Dimensions (HxWxD) and
weight 224(L) x 140(W) x 44(H) (in mm) About 0.95kg without power supply & HDD.
* All specifications are subject to change without prior notice.
Table 1 : Specification for FW5071

FW5071 User’s Manual
M4047-01 8 Seyeon Tech Co., Ltd
1.4. FW5071 Packing List
FW5071’s packing box includes the following items
FW5071 1 EA
Power Supply Unit
(Power Cable & SMPS DC12V 5A Adapter) 1 EA
CD (User’s Manual, IP Installer and etc) 1 EA
Table 2 : FW5071 Packing list


 Please check all the listed items are included in your package. For any missing items, please contact
your local distributor.

FW5071 User’s Manual
M4047-01 9 Seyeon Tech Co., Ltd
2. Hardware description
2.1. FW5071 Front View
Picture 2 : FW5071 Front panel
A B C D E F
PART DESCRIPTION
A POWER LED Red LED is turned on with power provided.
B STATUS LED It indicates the status of operation & shutdown of FW5071.
Yellow green LED turns on during normal operation after FW5071 boots.
C LAN LINK LED It indicates the status of access to LAN physically.
Green LED turns on in case it accesses to LAN normally.
D LAN(Tx/Rx) LED Green light blinks when there is data transmission at the connected LAN.
E HDD LED Green light blinks when formatting or recording at HDD.
F RECORDING LED Red light blinks when HDD is recording.
Table 3 : FW5071 Front panel
Beep Sound Description
Name Description
1 Power ON Beep one time shortly when power switch on.
2 System Ready Beep two times when booting is finished.
3 Power Off Beep two times (0.5 sec) when power switch off.
4 HDD Error Beeps continuously for five seconds when HDD has an error.
To make it keep quiet, you can set it on admin menu.
5 FD Button Beep one time (0.5 sec) after three seconds and then beep three times shortly after
another three seconds.
Table 4 : FW5071 Beep Sound

FW5071 User’s Manual
M4047-01 10 Seyeon Tech Co., Ltd
2.2. FW5071 Rear View
Picture 3 : FW5071 Real panel
A B C D E F G
PART DESCRIPTION
A Cooling FAN HDD Cooling FAN
B USB USB port (reserved for future use)
C Factory Default Switch
It gets back system to factory default.
Push the switch for 7 secs after system booting.
D LAN LAN port
E COM Needed to set up devices with Console ( UART-Out, UART-In)
F Power
DC 12V 5A


 Do not push power switch right after power turns off.


 Push power switch after HDD, FAN stops operation.
G Power Switch
Used to switch on/off power


 Do not turn off the power switch until format is completed since fatal
problem happens if users turn off the switch during HDD format.
Table 5 : FW5071 Rear panel

FW5071 User’s Manual
M4047-01 11 Seyeon Tech Co., Ltd
2.2.1. COM Port Description
Below image illustrates PIN No. of COM Port to connect in case of setting devices using console,
numbers are displayed in order from the left.
For RS-232 connection, RXD& TXD& GND are used only in general, RXD and TXD should be crossed
to communicate properly in case it connects with PC one by one.
Picture 4 : COM Port Description

FW5071 User’s Manual
M4047-01 12 Seyeon Tech Co., Ltd
3. FW5071 Installation and Basic Setup
3.1. Before Installation
 Read carefully User's Manual.
 Check User’s Network (IP Address, Network Mask and default gateway)
 Secure IP address for FW5071.
3.2. Factory Default Settings
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Factory Default
Admin ID root
Admin password root
IP address 10.20.30.40
Network mask 255.255.255.0
Gateway 10.20.30.1
Table 5 : Factory Default
Note: Factory default Admin ID and Password are all lower case letters. You can change the
password with Capital letters.
3.3. Installing FW5071
For installation of FW5071, please follow the steps below.
1. Place the FW5071 in place.
2. Connect the FW5071 to the Internet cable through the LAN port.
3. Connect the power supply of FW5071.
After that, you need to follow the steps below.
 Network Configuration: Refer to “IP Installer User’s Manual”
 Camera Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”
 Service Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”