FLORABEST FRM 1800 C3 User manual

®
ELECTRIC LAWNMOWER FRM 1800 C3
IAN 291853
ELEKTRO-RASENMÄHER
Originalbetriebsanleitung
ELECTRIC LAWNMOWER
Translation of the original instructions
291853_flo_Elektro-Rasenmäher_cover_IE_NI.indd 2 13.09.17 08:54

GB / IE/ NI Translation of the original instructions Page
DE/ AT/ CH Originalbetriebsanleitung Seite
Before reading, unfold the page containing the illustrations and familiarise yourself with all
functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
291853_o_Elektro-Rasenmäher_cover_IE_NI.indd 3 13.09.17 08:54
5
20

A
B
1
7 8 9
10
12
11
13
14
15
2b
3
4
5
2a
6
11
13 12
14
7
3
7
2a 2a

4
D
E
C
1
310
10 2b
16 16
9
4
4
17

5
NI
IE
GB
Contents
Introduction .................................5
Intended purpose.........................5
General Description......................6
Scope of Delivery...........................6
Function Description........................6
Overview ......................................6
Technical specications.................6
Safety information .......................7
Pictorial Diagrams on the
Equipment .....................................7
General safety information ..............8
Assembly...................................12
Assembling the Curved Handle ......13
Operation ..................................13
Hanging On/
Removing the Grass Bag ...............13
Level gauge .................................13
Emptying the Grass Bag................13
Adjusting the Cut Height ...............13
Switching On and Off...................14
Working with the Lawnmower........14
Cleaning, Maintenance
and Storage...............................15
General Cleaning and
Maintenance Work.......................15
Changing the Blade......................15
Storage.......................................15
Waste disposal and
environmental protection ...........16
Replacement parts/Accessories ..16
Trouble Shooting........................17
Guarantee .................................18
Repair Service............................19
Service-Center............................19
Importer ....................................19
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed.
It cannot be ruled out that residual quanti-
ties of lubricants will remain on or in the
equipment in isolated cases. This is not a
fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
The equipment is designed only for mow-
ing domestic lawns and grass areas.
Any other use that is not expressly per-
mitted in these instructions may result in
damage to the equipment and represent a
serious risk to the user.
The equipment is intended for use by
adults. It is not to be used by children or
people who are unfamiliar with these in-
structions. The use of the equipment is pro-
hibited in the rain or a damp environment.
Translation of the original
EC declaration of conformity ......37
Exploded Drawing .....................41

6
GB IE NI
Overview
A
1 Curved handle
2a Buttery nuts
for beam attachment
2b Locking lever for beam
attachment with washer
3 Lower bar
4 Grass bag
5 Cut height adjusting lever
6 Wheels
7 Lawnmower housing
8 Handle
9 Collision guard
10 Cable holder
11 Release button
12 Power cable outlet
13 Cable strain relief
14 Power cable (sold separately)
15 Start lever
C
16 Screws
E
17 Level gauge
I
18 Blade screw
19 Blade
20 Motor spindle
Technical specications
Electric Lawnmower ...FRM 1800 C3
Motor input power .....................1800 W
Mains voltage.................. 230 V~, 50 Hz
Idling speed ...........................3250 min-1
Blade width...................Approx. 440 mm
Cut height ............................20 – 70 mm
Protection class ................................. II
Protection type .................................IPX4
Weight ......................................15.7 kg
Lawn bag volume, net....................... 52 l
Sound pressure specication
(LpA)....................... 85 dB(A); KpA=3 dB
The manufacturer will not be liable for
damages caused by use other than for the
intended purpose or by incorrect opera-
tion.
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn bag
- 2 wing nuts and screws for attaching
the curved handle
- 2 buttery nuts for attaching the curved
handle
- 2 holders to attach the
connection cable
- Instruction Manual
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, release but-
ton, collision guard, and grass bag. Ad-
ditionally, the equipment is height adjust-
able to six levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.

7
NI
IE
GB
Noise level specication
measured (LWA)..94.5 dB(A); KWA=1.8 dB
guaranteed .......................... 96 dB (A)
Vibration on the handle
(ah)....................2.5 m/s2; K= 1.5 m/s²
This device is designed for operation on
a power supply network with a system im-
pedance (Internal resistance of the mains)
Zmax at the transfer point (domestic con-
nection) of a maximum of 0.354 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulls this requirement.
If necessary, the local power supply compa-
ny can be asked for the system impedance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
The noise and vibration values have been
determined in accordance with the stand-
ards and regulations specied in the decla-
ration of conformity.
Safety information
This section covers the basic safety
regulations when working with the
electric lawnmower.
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instruc-
tions carefully.
Wear eye and ear protec-
tion.
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Do not expose the equipment
to the damp. Do not work in
the rain and do not cut wet
grass.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work or
if the power cable is caught
or damaged.
Danger of damaged power
cable.
Keep the power cable away
from the cutting blade!

8
GB IE NI
Caution!
The lawnmower blade contin-
ues to run after switching off.
Scale cutting height
Cutting circle
440
dB
LWA Noise level specication LWA
in dB.
Protection class II
(Double insulation)
Do not dispose of electri-
cal equipment in domestic
waste.
Level gauge on grass
catcher:
Flap open:
grass catcher empty
Flap closed:
grass catcher full
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Instruction symbols with
information on preventing
damage.
Pull out the mains plug.
Wear hand protection.
Help symbols with informa-
tion on improving tool
handling.
General safety
information
This equipment may cause
serious injury in the case of
improper use. In order to
avoid injury to people and
damage to property, the fol-
lowing safety information
must be observed and users
must familiarise themselves
with all operating parts.
Preparation:
• This device can be used by
individuals with reduced physi-
cal, sensory or mental capabili-
ties or a lack of experience or
knowledge if they are super-
vised or have been instructed
in how to use the device safely
and understand the associated
dangers.
• Before using the unit, carefully
read through the instruction
manual and familiarise yourself
with all of its controls.
• Prior to use, always check the
connecting cable and extension
cable for signs of damage or
wear and tear. If the cable gets
damaged during use, it must be
disconnected from the supply
network immediately. DO NOT
TOUCH THE CABLE BEFORE IT
HAS BEEN DISCONNECTED.
Do not use the machine, if the
cable is worn or damaged. Da-
maged mains power cables in-
crease the risk of electric shock.
• Allow the motor to cool down
before you put the machine into
storage. Risk of burns!

9
NI
IE
GB
• Do not allow the use of this
equipment by children or others
who are unfamiliar with these
operating instructions. Local
regulations may specify the
minimum age of the operator.
• Do not use the equipment when
people and particularly children
or pets are nearby.
• Children should be supervised
to ensure that they do not play
with the appliance. Cleaning
and user maintenance must not
be carried out by children.
• The operator or user is respon-
sible for accidents, injuries to
other people or damage to the
property of others.
• Check the terrain on which the
equipment is to be used and
remove stones, sticks, wires and
other foreign objects that could
become caught and thrown up.
This can result in serious injury.
• Wear suitable work clothing
such as stable shoes with non-
slip soles and robust, long trou-
sers. Do not use the equipment
when barefoot or when wear-
ing open sandals. Avoid wear-
ing loose clothing with hanging
laces or belts. There is a risk of
injury!
• Before each use, carry out a
visual inspection of the equip-
ment. Do not use the equipment
if protective devices (e.g. colli-
sion guard or grass bag), parts
of the cutting device or bolts
are missing, worn or damaged.
To avoid imbalance, damaged
tools and bolts are to be re-
placed only in sets.
This ensures that the equipment
remains safe.
• Take care with equipment that
has several cutting tools, as the
movement of one blade may
result in the rotation of the other
blades.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
The use of non-original parts
will immediately invalidate the
guarantee.
Working with the Equipment:
Do not place feet or hands
near or under rotating parts
when working. Risk of injury!
Observe the noise protection
and local regulations.
• Switch on the motor accord-
ing to the instructions and only
when your feet are at a safe
distance from the cutting tools.
Risk of injury from cuts.
• Do not use the equipment in
the rain, in poor weather, in a
damp environment, or on wet
grass. Water entry into the
equipment increases the risk of
electric shock.
Work only in daylight or with
good lighting.
Accident hazard!
• Do not work with the equipment
when tired, lacking concentra-
tion or under the inuence of
alcohol or drugs. Always take
breaks in good time. Take a
sensible approach to the work.

10
GB IE NI
A moment of carelessness when
using the equipment can result
in serious injury.
• When working, ensure a rm
stance, particularly on slopes.
This enables you to control the
equipment better in unexpected
situations.
Always work across the slope,
never upwards or downwards.
Take particular care when
changing the direction of travel
on the slope. Do not work on
excessively steep slopes.
• Run the equipment only at a
walking pace. Take particular
care when turning the equip-
ment around, pulling it towards
you or going backwards.
There is a risk of personal injury.
• Switch on the equipment care-
fully and in accordance with
the directions in these instruc-
tions. Ensure sufcient distance
between feet and the rotating
blades. Contact with the cutter
can result in injury.
• Do not tilt the equipment when
starting other than if it is neces-
sary to do so when starting up
in long grass. In this case, tilt the
equipment by pressing down the
handle bar such that the front
wheels of the equipment are
raised. Always check that both
hands are in the working posi-
tion before returning the equip-
ment to the ground.
• Do not work without the grass
bag or collision guard. Keep
away from the ejection hole at
all times.
• Do not start the motor when
standing in front of the emission
duct.
Caution! Danger! The blade
continues to run after switch-
ing off. There is a risk of in-
jury.
• The equipment is not to be lifted
or transported while the motor
is running. Switch off the equip-
ment if it has to be tilted in
transit, when crossing surfaces
other than grass, and when the
equipment is being transported
to and from the surfaces to be
mowed.
• Always keep the grass ejection
hole clean and clear. Remove
cut material only when the
equipment is stopped.
• Do not leave the equipment un-
attended in the workplace.
• Do not work with equipment
that is damaged, incomplete, or
has been modied without the
authorisation of the manufac-
turer. Do not use the equipment
with damaged safety devices or
screens or with missing safety
equipment such as deection
and/or grass collection devices.
• Do not overload the equipment.
Work only within the speci-
ed power range and do not
change the regulator settings on
the motor. Do not use low-pow-
ered machines for heavy work.
Do not use your equipment for
purposes other than those for
which it is designed.
• Do not use the equipment near
inammable liquids or gases.
Non-observance will result in a
risk of re or explosion.

11
NI
IE
GB
• Do not lift or carry the equip-
ment when the motor is running.
Risk of injury from cuts.
• Switch off the equipment and
disconnect the plug. Make sure
that all moving parts have come
to a complete stop:
- Whenever you leave the ma-
chine,
- Before cleaning the ejection
hole or removing blockages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- if a foreign object has been
hit by the device. Check for
damage to the lawnmower
and carry out the necessary
repairs before switching on
again and working with the
lawnmower.
If the lawnmower starts to vi-
brate abnormally, an immedi-
ate check must be carried out.
- carry out a search for damage;
- perform the necessary repairs
of damaged parts;
- make sure that all nuts, bolts
and screws are properly tigh-
tened.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during mowing.
Maintenance and Storage:
• Ensure that all nuts, bolts and
screws are tightened rmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specied in these
instructions is to be carried out
only by customer service centres
that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid n-
gers being trapped between the
rotating blades and xed parts
of the machine.
Many accidents are caused by
poorly maintained equipment.
• Check that only replacement
tools authorised by the manu-
facturer are used.
• During maintenance of the cut-
ting blades, be aware that they
can be brought into motion
even when the power supply is
switched off.
• Worn or damaged information
signs must be replaced.
• Replace worn or damaged
parts for safety reasons. Use
only original spare parts and
accessories.

12
GB IE NI
Electrical Safety:
• Ensure that the mains voltage
matches the specications on
the rating plate.
• Connect the equipment only
to a socket that has a residual
current operated device (RCD
switch) with a trip current of no
more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal
fences, metal posts). There is an
increased risk of electric shock
if your body is earthed.
• Use only authorised power cables
of H05RN-F, which are no more
than 75m long and suitable for
outdoor use. The power cable
wire cross section must be at least
2.5 mm2. Always completely
unroll cable drums before use.
Check the cable for damage.
• To x on the power cable, use
the cable suspension intended
for the purpose.
• Keep the power cable away
from the cutting tool when work-
ing. The cutting blades may
damage the power cable and
result in contact with live parts.
Always run the power cable be-
hind the operator.
The extension cable can be
accidentally severed. Risk of
electric shock!
• Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
• Switch off the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the cus-
tomer services of the same, or
a qualied person, in order to
avoid hazards.
• Do not connect a damaged
power cable to the mains. Do not
touch a damaged power cable
when it is connected to the mains.
A damaged power cable may
result in contact with live parts.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear pro-
tection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this elec-
tric tool generates an electromagnetic
eld which, under certain circum-
stances, may impair the functionality
of active or passive medical implants.
To reduce the risk of serious or lethal
injuries, we recommend that persons
with medical implants consult their
doctor and the manufacturer of their
medical implant before operating the
machine.
Assembly
Disconnect the plug before any work
on the equipment. There is a risk of
injury.

13
NI
IE
GB
Assembling the Curved
Handle
For a simple holmm installation, select
cutting height 20 mm (see „Adjusting
the cutting height“).
B
1. Remove the two pre-installed
buttery nuts (2a) from the lawn-
mower housing (7). Insert the
lower bar (3) into the slot on the
lawnmower housing (7).
2. Fix the bottom bar (3) using the
two screws and buttery nuts
(2a).
C
3. Tighten the loop handle (1) with
the enclosed carriage bolts (16)
and two locking levers for beam
attachment with washer (2b) to
the lower beam (3).
4. Clip the cable hooks (10) into
the bar (3) and the handle (1) to
fasten the cable.
When both wing nuts are loosened,
the curved handle can be folded
down for storing the equipment.
Ensure that the power cable is not
caught.
Operation
Hanging On/Removing the
Grass Bag
D
1. To hang on the grass bag (4),
lift the collision guard (9) and
hang on the grass bag. Fold the
collision guard (9) onto the grass
bag (4). It holds the grass bag in
the correct position.
2. To remove the grass bag (4), lift
the collision guard (9) and detach
the grass bag. Fold the collision
guard (9) back onto the mower
housing.
Do not work with the lawn-
mower without the collision
guard or lawn box. There is
a risk of injury.
E
Level gauge
The level gauge (17) is located on the side
of the grass catcher (4).
Flap (17) open:
grass catcher (4) empty
Flap (17) closed:
grass catcher (4) full
The level indicator (17) works when
the device is in operation.
Emptying the Grass Bag
To empty the grass collection bag, also use
the bottom bag handle (4).
Adjusting the Cut Height
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
F
1. Hold the cut height adjusting
lever (5) and guide it past the
indent to the desired cut height
setting.
2. The handle (8) may be used
to help, in order to prevent to
mower rolling away.

14
GB IE NI
20 mm - Position 1
30 mm - Position 2
40 mm - Position 3
50 mm - Position 4
60 mm - Position 5
70 mm - Position 6
The correct height is around 25 – 40 mm
for a decorative lawn and around 30 –
60mm for a used lawn.
A higher cut height should be se-
lected for the rst cut of the season.
Observe the noise protection and
local regulations.
Switching On and Off
G
1. Insert the power cable plug into
the socket (12) on the curved
handle (1).
2. To relieve the strain, form a loop
with the end of the power cable
(14) and hang this into the strain
relief (13). See the diagramm
(Detail screen).
3. Connect the equipment to the
power supply.
4. Before switching on, ensure that
the equipment is not in contact
with any objects.
5. To switch on, press the release
button (11) on the handle at the
same time as pressing the start
lever. Release the release button
(11).
6. To switch off, release the start
lever (15).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.
Working with the
Lawnmower
Regular mowing encourages increased foli-
ation of the grass and kills off weeds at the
same time. Therefore, not only does each
mowing increase the density of the lawn, it
also produces an evenly resilient lawn.
The rst cut is to be made in around April,
at a growth height of 70 – 80 mm. In the
main vegetation period, the lawn is to be
mowed at least once a week.
• Start mowing near the socket and work
away from the socket.
• Always keep the extension cable be-
hind you and when you turn, move
it to the side that has already been
mowed.
• Run the equipment at a walking pace,
in tracks that are as even as possible.
For gap-free mowing, the tracks should
always overlap by a few centimetres.
• Adjust the cut height so the equipment
is not overloaded. Otherwise, the mo-
tor may be damaged.
• On slopes, always work across the
slope. Take particular care when going
backwards and pulling the equipment.
• Clean the equipment after each use, as
described in the chapter on “Cleaning,
Maintenance and Storage”.
Switch off the equipment after
work and in order to transport it,
disconnect the plug and wait until
the blade stops. There is a risk of
injury.

15
NI
IE
GB
Cleaning, Maintenance
and Storage
Have work that is not de-
scribed in these instructions
carried out by a customer
service centre that we have
authorised. Use only original
parts.
Wear gloves when handling the
blade.
Switch off the equipment before all
maintenance and cleaning work,
disconnect the plug and wait until the
blade stops. There is a risk of injury.
General Cleaning and
Maintenance Work
Do not hose down the lawn-
mower with water.
• Always keep the equipment clean. To
clean, use a brush or cloth but no de-
tergent or solvent.
• After mowing, use a piece of wood
or plastic to remove adherent plant
remains from the wheels, ventilation
holes, ejection hole and blade area.
Do not use hard or pointed objects, as
these may damage the blade.
• Oil the wheels from time to time.
• Before each use, check the lawnmower
for obvious defects such as loose, worn
or damaged parts. Check that all nuts,
bolts and screws are sitting rmly.
• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.
Changing the Blade
If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade is
damaged or showing signs of imbalance,
it must be replaced (see chapter on “Spare
Parts”).
I
1. Switch off the equipment, discon-
nect the plug and wait until the
blade stops.
2. Turn the equipment over.
3. Use sturdy gloves and hold the
blade rmly (19). Turn the blade
screw (18) anticlockwise off of
the motor spindle (20) using a
screwdriver (AF 13 mm).
4. Install the new blade in the
reverse order. Ensure that the
blade is positioned correctly and
the screw tightened rmly.
Storage
• Keep the equipment dry and out of
reach of children. Loosen the wing nuts
and fold down the handle bar so the
equipment takes up less space. See the
diagramm H. Ensure that the cable is
not caught.
• Allow the motor to cool before storing
the equipment in a conned space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.

16
GB IE NI
Waste disposal
and environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
The apparatus can not be disposed
of with regular household or bulk
waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• You can nd out more about waste
collection sites and times through your
local administration ofce or waste dis-
posal company.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
Replacement parts / Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” Page 19). Please have the order number mentioned below ready.
Item Item Description Order number
Instruction Exploded
Manual Drawing
4 26 Grass bag 91103875
19 11 Spare blade
(manufacturer’s designation: GL01BX.00.06 SKB) 13700303

17
NI
IE
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment
does not start
Power is off Check the socket, cable, wire and plug and have any repairs
carried out by an electrician
Defective start lever
(A15) Repair by customer services
Worn carbon brushes
Defective motor
Grass too long Set a greater cut height. Lift the front wheels slightly by pressing
down on the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result
unsatisfactory
or motor
labours
Cut height too low Set a higher cut height
Blade ( I19) blunt Have the blade ( I19)
sharpened or replace it
Blade ( I19) area blocked Clean the equipment
Blade ( I19) assembled
incorrectly Install the blade ( I19)
correctly
Blade ( I19)
fails to turn
Blade ( I19) blocked by
grass Remove the grass
Blade screw ( I18) loose Tighten the blade screw ( I18)
Strange
noises, rattling
or vibrations
Blade screw ( I18) loose Tighten the blade screw ( I18)
Blade ( I19) damaged Replace the blade ( I19)
Level indicator
(E17) does
not work Contamination Cleaning with a soft brush. The
level indicator must close by
itself, if it was opened.

18
GB IE NI
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect
occurs within three years of the date of
purchase of this product, we will repair or
replace – at our choice – the product for
you free of charge. This guarantee requires
the defective equipment and proof of pur-
chase to be presented within the three-year
period with a brief written description of
what constitutes the defect and when it oc-
curred.
If the defect is covered by our guarantee,
you will receive either the repaired product
or a new product. No new guarantee pe-
riod begins on repair or replacement of the
product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately af-
ter unpacking. Repairs arising after expiry
of the guarantee period are chargeable.
Guarantee Cover
The equipment has been carefully pro-
duced in accordance with strict quality
guidelines and conscientiously checked
prior to delivery.
The guarantee applies for all material and
manufacturing defects. This guarantee
does not extend to cover product parts that
are subject to normal wear and may there-
fore be considered as wearing parts (e.g.
blade) or to cover damage to breakable
parts (e.g. switches).
This guarantee shall be invalid if the prod-
uct has been damaged, used incorrectly or
not maintained. Precise adherence to all of
the instructions specied in the operating
manual is required for proper use of the
product. Intended uses and actions against
which the operating manual advises or
warns must be categorically avoided.
The product is designed only for private
and not commercial use. The guarantee
will be invalidated in case of misuse or
improper handling, use of force, or inter-
ventions not undertaken by our authorised
service branch.
Processing in Case of Guarantee
To ensure quick handling of you issue,
please follow the following directions:
• Please have the receipt and item num-
ber (IAN 291853) ready as proof of
purchase for all enquiries.
• Please nd the item number on the rat-
ing plate.
• Should functional errors or other de-
fects occur, please initially contact the
service department specied below by
telephone or by e-mail. You will then
receive further information on the pro-
cessing of your complaint.

19
NI
IE
GB
• After consultation with our customer
service, a product recorded as defec-
tive can be sent postage paid to the
service address communicated to you,
with the proof of purchase (receipt)
and specication of what constitutes
the defect and when it occurred. In or-
der to avoid acceptance problems and
additional costs, please be sure to use
only the address communicated to you.
Ensure that the consignment is not sent
carriage forward or by bulky goods,
express or other special freight. Please
send the equipment inc. all accessories
supplied at the time of purchase and
ensure adequate, safe transport pack-
aging.
Repair Service
For a charge, repairs not covered by the
guarantee can be carried out by our ser-
vice branch, which will be happy to issue
a cost estimate for you.
We can handle only equipment that has
been sent with adequate packaging and
postage.
Attention: Please send your equipment to
our service branch in clean condition and
with an indication of the defect.
Equipment sent carriage forward or by
bulky goods, express or other special
freight will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.
Service-Center
GB Service Great Britain
Tel.: [phone]
(£ 0.10/Min.)
E-Mail: [email protected]
IAN 291853
IE
NI
Service Ireland
Northern Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 291853
Importer
Please note that the following address is
not a service address. Please initially con-
tact the service centre specied above.
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
www.grizzly-service.eu

20
DE AT CH
Einleitung
Herzlichen Glückwunsch zum Kauf Ihres
neuen Gerätes. Sie haben sich damit für
ein hochwertiges Gerät entschieden. Dieses
Gerät wurde während der Produktion auf
Qualität geprüft und einer Endkontrolle
unterzogen. Die Funktionsfähigkeit Ihres
Gerätes ist somit sichergestellt. Es ist nicht
auszuschließen, dass sich in Einzelfällen
am oder im Gerät Restmengen von Schmier-
stoffen benden. Dies ist kein Mangel oder
Defekt und kein Grund zur Besorgnis.
Die Betriebsanleitung ist Bestandteil
dieses Gerätes. Sie enthält wichtige
Hinweise für Sicherheit, Gebrauch
und Entsorgung. Machen Sie sich
vor der Benutzung des Gerätes mit
allen Bedien- und Sicherheitshin-
weisen vertraut. Benutzen Sie das
Gerät nur wie beschrieben und für
die angegebenen Einsatzbereiche.
Bewahren Sie die Betriebsanlei-
tung gut auf und händigen Sie alle
Unterlagen bei Weitergabe des
Gerätes an Dritte mit aus.
Bestimmungsgemäße
Verwendung
Das Gerät ist nur für das Mähen von
Rasen- und Grasächen im häuslichen Be-
reich bestimmt.
Jede andere Verwendung, die in dieser
Betriebsanleitung nicht ausdrücklich zuge-
lassen wird, kann zu Schäden am Gerät
führen und eine ernsthafte Gefahr für den
Benutzer darstellen.
Das Gerät ist zum Gebrauch durch Er-
wachsene bestimmt. Kinder sowie Per-
sonen, die mit dieser Betriebsanleitung
nicht vertraut sind, dürfen das Gerät nicht
benutzen.
Inhalt
Einleitung...................................20
Bestimmungsgemäße
Verwendung ..............................20
Allgemeine Beschreibung ...........21
Lieferumfang..................................21
Funktionsbeschreibung....................21
Übersicht ......................................21
Technische Daten........................21
Sicherheitshinweise....................22
Bildzeichen auf dem Gerät..............22
Allgemeine Sicherheitshinweise .......23
Montage ....................................29
Bügelgriff montieren .......................29
Bedienung .................................29
Grasfangsack einhängen/
abnehmen.....................................29
Füllstandsanzeige...........................29
Grasfangsack entleeren ..................30
Schnitthöhe einstellen .....................30
Ein- und Ausschalten ......................30
Arbeiten mit dem Gerät ..................30
Reinigung/Wartung/Lagerung ...31
Allgemeine Reinigungs-
und Wartungsarbeiten....................31
Messer austauschen .......................31
Lagerung ......................................32
Entsorgung/Umweltschutz..........32
Ersatzteile / Zubehör .................32
Garantie ....................................33
Reparatur-Service ......................34
Service-Center............................34
Importeur ..................................34
Fehlersuche................................35
Original EG-
Konformitätserklärung...............39
Explosionszeichnung..................41