FLOS GOLDMAN User manual

REV. 1
DATE 20/07/2021
1
GOLDMAN
Designed by Ron Gilad, 2013
F3440044
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF3320100
–Black plug kit & driver
REV. 1
DATE 30/06/2021
GOLDMAN
F3440044

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF3320100
BLACK PLUG KIT & DRIVER
GOLDMAN
F3440044
REV. 1
DATE 30/06/2021
Goldman
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small Led
p.11
Wirering
p.20
Tab F
p.03
Kelvin
Led GM
p.03
Tab T
p.03
To-Tie
All
Versions
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the plug into the driver unit by using the guides snap it inside its
apposite slot (use the correct type of plug for the area in which the
device must be installed), connect the plug to the feeder unit locking it
in by rotating it 90°clockwise.
RF3320100
BLACK PLUG KIT & DRIVER
GOLDMAN
F3440044
REV. 1
DATE 30/06/2021