FLOS RF05307 User manual

EN
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05307
SUPPORT RING
REV. 1
DATE 29/07/2021
Romeo
Moon F Romeo
Soft F

2
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Rest the support ring (D) on the support brackets (E) and lock it by fastening it with
the screw/pivots (F).
EN
Fig.1
E
F
D
REV. 1
DATE 29/07/2021
RF05307
SUPPORT RING

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the diffuser (H).
EN
Fig.2
H
REV. 1
DATE 29/07/2021
RF05307
SUPPORT RING

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the lamp-bulb (I).
EN
Fig.3
I
REV. 1
DATE 29/07/2021
RF05307
SUPPORT RING

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Position the fabric lamp shade (N) on the support
ring (D) ensuring to insert the hook threaded screws
(R) into the apposite holes present in the support
ring (D), fasten the small bolts (Q).
Rest the covering ring (O) on the pins (G).
Fig.4
Fig.5
REV. 1
DATE 29/07/2021
IO
O
G
RD
RF05307
SUPPORT RING