FLOS SUPERLOON F6630030 User manual

EN
8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 04/08/2021
RF6630130
BLACK ELECTRIFIED FIXED LEG
SUPERLOON F6630030

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the two legs (A) in the pins (B) of the base element (C)
paying attention to the correct orientation of the feet (D).
EN
Fig.1
REV. 1
DATE 04/08/2021
B
A
C
D
RF6630130
BLACK ELECTRIFIED FIXED LEG
SUPERLOON F6630030

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Mount the diffuser head (E) inserting the pin (F) in the hole
of the base element (C).
EN
Fig.2
REV. 1
DATE 04/08/2021
E
C
E
RF6630130
BLACK ELECTRIFIED FIXED LEG
SUPERLOON F6630030

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Connect the plug (I) to the feeder unit locking in by rotating
it 90° clockwise.
EN
Fig.3
REV. 1
DATE 04/08/2021
H
I
G
RF6630130
BLACK ELECTRIFIED FIXED LEG
SUPERLOON F6630030

12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
To switch on/off the device lightly touch the sensor (L); prolonged contact with the sensor
causes the progressive increase of the light intensity from 10% up to 100% and at the same
time an increase of the colour temperature from 2200K to 2800K; when the desired intensity
is reached, remove finger from the button. A successive prolonged contact with the sensor will
cause the progressive decrease. NOTE: Thanks to the card’s
memory, when the device is turned on from a wall switch, it comes on again at the same
brightness level it was at when it was turned off. The brightness level (and corresponding
colour temperature) is automatically
activated by the LED card after at least 15 seconds’ fixed operation (without making
adjustments).
EN
Fig.4
REV. 1
DATE 04/08/2021
L
RF6630130
BLACK ELECTRIFIED FIXED LEG
SUPERLOON F6630030