FLOS BIAGIO User manual

REV. 1
DATE 16/07/2021
1
BIAGIO
Designed by Tobia Scarpa, 1968
F0700000
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF04727
–Electrical wiring
REV. 1
DATE 16/07/2021
BIAGIO
F0700000

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF04727
ELECTRICAL WIRING
BIAGIO F0700000
REV. 1
DATE 16/07/2021

Separate the ring nut (A) from the light bulb
holder (B) by unscrewing it.
Insert the lamp holder (B) into the ring
support (C) and lock it by tightening the ring
nut (C); install the light bulb.
Fig.1
Fig.2
4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
A
REV. 1
DATE 16/07/2021
RF04727
ELECTRICAL WIRING
BIAGIO F0700000
B