FLOS TAB T LED User manual

REV. 1
DATE 30/06/2021
1
TAB LED T
Designed by E.Barber & J. Osgerby, 2011
F6563030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
TAB LED T
F6563030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF3320100
–Black Plug + kit driver spare part
REV. 1
DATE 30/06/2021

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF3320100
PLUG KIT + DRIVER SPARE PART
TAB LED T F6563030
REV. 1
DATE 30/06/2021
Goldman
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small Led
p.11
Wirering
p.20
Tab F
p.03
Kelvin
Led GM
p.03
Tab T
p.03
To-Tie
All
Versions
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
REV. 1
DATE 30/06/2021
Insert the plug into the driver unit by using the guides snap it inside its
apposite slot (use the correct type of plug for the area in which the
device must be installed), connect the plug to the feeder unit locking it
in by rotating it 90°clockwise.
RF3320100
PLUG KIT + DRIVER SPARE PART
TAB LED T F6563030