FLOS KELVIN LED GM User manual

REV. 1
DATE 22/07/2021
1
KELVIN LED GM
Designed by Antonio Citterio, 2009
F3311030
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF3320100 – Black Plug kit & driver
02. RF18764 – Black insert for lamp base
03. F3322030A –Kelvin Led black base
04. F3312030A –Kelvin Led black body
KELVIN LED GM
F3311030
REV. 1
DATE 22/07/2021
02
03
01
04

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF3320100
BLACK PLUG KIT & DRIVER
KELVIN LED GM F3311030
REV. 1
DATE 22/07/2021
Goldman
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small
Led
p.11
Ray T
p.20
Tab F
p.03
Kelvin
Led GM
p.03
Tab T
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the plug into the driver unit by using the guides snap it inside its apposite
slot (use the correct type of plug for the area in which the device must be
installed), connect the plug to the feeder unit locking it in by rotating it 90°
clockwise.
REV. 1
DATE 22/07/2021
RF3320100
BLACK PLUG KIT & DRIVER
KELVIN LED GM F3311030

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF18764
BLACK INSERT FOR LAMP BASE
KELVIN LED GM F3311030
REV. 1
DATE 22/07/2021

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Glue the insert inside the lower joint by utilizing a bicomponent glue.
REV. 1
DATE 22/07/2021
RF18764
BLACK INSERT FOR LAMP BASE
KELVIN LED GM F3311030

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F3322030A
KELVIN LED GM BLACK BASE
KELVIN LED GM F3311030
REV. 1
DATE 22/07/2021

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the support (A) of the device into the pin (B) of the base.
B
A
REV. 1
DATE 22/07/2021
F3322030A
KELVIN LED GM BLACK BASE
KELVIN LED GM F3311030

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F3312030A
KELVIN LED GM BLACK BODY
KELVIN LED GM F3311030
REV. 1
DATE 22/07/2021

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the support (A) of the device into the pin (B) of the base.
REV. 1
DATE 22/07/2021
B
A
F3312030A
KELVIN LED GM BLACK BODY
KELVIN LED GM F3311030