FLOS KELVIN EDGE User manual

REV. 1
DATE 20/07/2021
1
KELVIN EDGE
Designed by Antonio Citterio, 2015
F3452033
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RF3320100
–Black plug kit & driver
02. F3451033
–Kelvin edge titanium base
03. F3450033
–Kelvin edge titanium body
KELVIN EDGE
F3452033
REV. 1
DATE 20/07/2021

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RF3320100
BLACK PLUG KIT & DRIVER
KELVIN EDGE F3452033
REV. 1
DATE 20/07/2021
Goldman
p.03
Kelvin
Edge
p.03
Kelvin
Led F
p.03
Ok
p.38
Copycat
p.05
Serena
p.10
Taccia
Small Led
p.11
Wirering
p.20
Tab F
p.03
Kelvin
Led GM
p.03
Tab T
p.03
To-Tie
All
Versions
p.03

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
REV. 1
DATE 20/07/2021
Insert the plug into the driver unit by using the guides snap it inside its
apposite slot (use the correct type of plug for the area in which the
device must be installed), connect the plug to the feeder unit locking it
in by rotating it 90°clockwise.
RF3320100
BLACK PLUG KIT & DRIVER
KELVIN EDGE F3452033

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F3451033
KELVIN EDGE TITANIUM BASE
KELVIN EDGE F3452033
REV. 1
DATE 20/07/2021

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the support (A) of the device into the pin (B) of the base.
REV. 1
DATE 20/07/2021
B
A
F3451033
KELVIN EDGE TITANIUM BASE
KELVIN EDGE F3452033

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
F3450033
KELVIN EDGE TITANIUM BODY
REV. 1
DATE 20/07/2021
KELVIN EDGE F3452033

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Fig.1
Insert the support (A) of the device into the pin (B) of the base.
REV. 1
DATE 20/07/2021
B
A
F3450033
KELVIN EDGE TITANIUM BODY
KELVIN EDGE F3452033