FLOS Tatou F User manual

EN
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER
REV. 1
DATE 17/08/2021
Tatou F Tatou S2

1
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Disassemble the reflector ring (A) from the external diffuser (B) by rotating it slightly
anticlockwise.
EN
Fig.1
A
B
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER
TATOU F F7764009
REV. 1
DATE 16/08/2021

2
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Assemble the reflector ring (A) onto the internal diffuser (C) with the three screws (D)
provided (utilize a flat screwdriver).
EN
Fig.2
A
C
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER
TATOU F F7764009
REV. 1
DATE 16/08/2021
D

3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Insert the lamp bulb.
Assemble the external diffuser (B) onto the reflector ring (A) being careful to make
the three hooks (F) present on the reflector ring (A) correspond with the relative
housings (E) present on the external diffuser (B).
At this point, lock the external diffuser by rotating it slightly clockwise.
EN
Fig.3
B
A
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER
TATOU F F7764009
REV. 1
DATE 16/08/2021
F
E

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Disassemble the reflector ring (A) from the external diffuser (B) by rotating it slightly
anticlockwise.
EN
Fig.1
A
B
TATOU S2 F7766009
REV. 1
DATE 17/08/2021
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Assemble the reflector ring (A) on the internal diffuser (C) by fastening the three
screws (D). Please utilize flat blade screwdriver.
EN
Fig.2
A
C
D
TATOU S2 F7766009
REV. 1
DATE 17/08/2021
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Assemble the external diffuser (I) onto the reflector ring (L) being careful to make
the three hooks (O) present on the reflector ring (O) correspond with the relative
housings (L) present on the external diffuser (I).
At this point, lock the external diffuser by rotating it slightly clockwise.
EN
Fig.3
I
L
O
N
TATOU S2 F7766009
REV. 1
DATE 17/08/2021
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Fit the diffuser (I) onto the supports of the three arms (P), by tilting the supports as
shown in the image, by inserting first the lamp-bulb and one arm through the lamp
hole.
EN
Fig.4
TATOU S2 F7766009
REV. 1
DATE 17/08/2021
F7755009
F-S2 WHITE ASSEMBLY DIFFUSER
I
PP