FLOS ZEPPELIN 1 User manual

REV. 1
DATE 31/05/2021
1
ZEPPELIN 1
Designed by Marcel Wanders, 2005
F9800009
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
ZEPPELIN 1
F9800009
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. RA3690209 –Complete rose assembly
02. RF05382 –Kit of quantity 5 OR rings
03. 13833 –Porcelain E27 lampholder
04. RF9800300 –Crystal sphere diffuser assembly
REV. 1
DATE 31/05/2021





EN
3
RA3690209
COMPLETE ROSE ASSEMBLY
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
ZEPPELIN 1 F9800009
Diameter of the fixing metal ring Glo-Ball 1
REV. 1
DATE 31/05/2021

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
RA3690209
COMPLETE ROSE ASSEMBLY
ZEPPELIN 1 F9800009
Fig.1
Fig.2
Fix the wall fixture (A) with the appropriate
expansion bolts. NOTE: Select and employ screw
anchors which are suited to the surface where the
appliance is to be installed.
Connect the power cable to the terminal box (not
supplied with the spare-part). Mount the ceiling-
rose (F).
A
F
REV. 1
DATE 31/05/2021

EN
5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF05382
KIT OF QUANTITY 5 OR RINGS
ZEPPELIN 1 F9800009
REV. 1
DATE 31/05/2021

EN
6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
13833
PORCELAIN E27 LAMP HOLDER
ZEPPELIN 1 F9800009
REV. 1
DATE 31/05/2021

7
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Delicately remove the crystal bowl from the lamp (refer to letter G in the
image below). Afterwards remove the lamp from the ceiling and lay it down on
a clean towel.
ZEPPELIN 1 F9800009
C
E
D
F
GFig.1
REV. 1
DATE 31/05/2021
13833
PORCELAIN E27 LAMP HOLDER

8
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
In the upper part of the lamp (refer to letter D in the image below), unscrew
the two grub screws number 19 (M6 x 10 image in the green circle) and
number 20 (M3 x 6 in the red circle).
ZEPPELIN 1 F9800009
FRONT VIEW SECTION LATERAL VIEW SECTION
17
18
20
19
Fig. 2
REV. 1
DATE 31/05/2021
13833
PORCELAIN E27 LAMP HOLDER
C
E
D
F
G

9
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unscrew the white 10 x 1 terminal (refer to point 18) and slip off the stem with
its lamp holder (refer to point number 17) from the lower part (refer to letter E
in the image below).
ZEPPELIN 1 F9800009
Fig. 3
REV. 1
DATE 31/05/2021
13833
PORCELAIN E27 LAMP HOLDER
C
E
D
F
G
17
18
20

10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unhook the lamp holder by inserting between the lifting hooks of the lamp holder a fine screwdriver. Afterwards
replace the lamp holder by connecting it electrically.
REMARKS!!! Please respect the polarities of the electrical wires.
Assemble the lamp holder by pressing it back on the lamp holder support.
Slip back on the stem in the body lamp.
In the upper part of the lamp (refer to letter D in the image Fig.2 page 8), fasten the two grub screws number 19
(M6 x 10 image in the green circle) and number 20 (M3 x 6 in the red circle).
Assemble the lamp back on the ceiling (refer to the installation sheet of the Zeppelin 1).
Fig. 4
22
23
24
25
26
27
N.B: CABLE SHEATH 3x0,75 TRANSP.
80mm ON LAMP HOLDER SIDE
ZEPPELIN 1 F9800009
REV. 1
DATE 31/05/2021
13833
PORCELAIN E27 LAMP HOLDER

EN
11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
RF9800300
CRYSTAL SPHERE DIFFUSER ASSEMBLY
ZEPPELIN 1 F9800009
REV. 1
DATE 31/05/2021

EN
12
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
ZEPPELIN 1 F9800009
RF9800300
CRYSTAL SPHERE DIFFUSER ASSEMBLY
Insert the gold pin (Fig. 1) into the pern (Fig. 2 &
Fig.3) and screw it.
Fig. 1 Fig. 2
Fig. 3
REV. 1
DATE 31/05/2021

13
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Insert the lamp ring support, ensuring to position the
guides in correspondence to the appropriate holes
of the lamp ring.
Lock the crystal ball by turning it clockwise until it
clicks and until you reach the end stroke.
Fig.4
REV. 1
DATE 31/05/2021
ZEPPELIN 1 F9800009
RF9800300
CRYSTAL SPHERE DIFFUSER ASSEMBLY