FLOS NOCTAMBULE F User manual

REV. 1
DATE 30/06/2021
1
NOCTAMBULE F
Designed by Konstantin Grcic, 2019
F0266000
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.

EN
2
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
01. F0255000A –Bowl glass
04. RF0254100 –Fixing screws kit
05. RF27498 –Ring led diffuser
06. F0257000A –High cylinder
07. RF3320400 –Black plug kit & driver
08. RF27549 –Switch dimmer 48V PMW 500Hz
09. F0262030A –Big base
REV. 1
DATE 30/06/2021
NOCTAMBULE F
F0266000
02
04
05
06
07
08
09
05

EN
3
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
F0255000A
BOWL GLASS
NOCTAMBULE F F0266000

4
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the base from the cylinder.
Fig.1
Fig.2
Disconnect the dimmer from the electrical cable.
Carefully place the lamp in a horizontal position by
resting it on the cylinder packages.
Unscrew the screws from the base.
REV. 1
DATE 30/06/2021
x3
F0255000A
BOWL GLASS
NOCTAMBULE F F0266000

5
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Unscrew the screws from the cylinder (1-2).
Disconnect the cylinder from the other one (3).
Fig.3
Fig.4
REV. 1
DATE 30/06/2021
2
1
3
x3 MAX
F0255000A
BOWL GLASS
NOCTAMBULE F F0266000

6
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Disconnect the cylinder from the bowl (Fig. 4).
Remove the old bowl and place the new one.
Now Connect the cylinder to the new bowl.
Tighten the screws to the new bowl.
Carefully place the lamp in a horizontal position by
resting it on the cylinder packages.
Connect the cylinder to the other one.
Tighten the screws to the cylinder.
Connect the base to the cylinder.
Tighten the screws of the base
Connect the dimmer to the electrical cable.
Fig.5
Fig.6
Carefully place the lamp in a vertical position.
Unscrew the screws from the bowl (Fig. 3).
REV. 1
DATE 30/06/2021
F0255000A
BOWL GLASS
NOCTAMBULE F F0266000

EN
7
RF0254100
FIXING SCREWS KIT
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

EN
8
RF27498
RING LED DIFFUSER
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

EN
9
F0257000A
HIGH CYLINDER
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

x3
10
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the base from the cylinder.
Fig.1
Fig.2
Disconnect the dimmer from the electrical cable.
Carefully place the lamp in a horizontal position by
resting it on the cylinder packages.
Unscrew the screws from the base.
REV. 1
DATE 30/06/2021
F0257000A
HIGH CYLINDER
NOCTAMBULE F F0266000

11
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Figure 3 and 4 (only for 2/3/4 cylinders version)
Disconnect the cylinder from the other one (3).
Unscrew the screws from the cylinder (1-2).
Replace the old cylinder with the new one.
Now assemble all the components, please
proceed in reverse order.
Connect the cylinder to the other one (3).
Tighten the screws to the cylinder (1-2).
Connect the base to the cylinder .
Tighten the screws of the base.
Connect the dimmer to the electrical cable.
Fig.3
Fig.4
X4 MAX
3
2
1
REV. 1
DATE 30/06/2021
F0257000A
HIGH CYLINDER
NOCTAMBULE F F0266000

EN
12
RF3320400
BLACK PLUG & KIT DRIVER
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000
Captain
Flint
p.05
Noctambule
F
p.15
Sawaru
p.03
Superloon
p.13
Taccia
Led
p.13
Arco Led
p.03

EN
13
RF3320400
BLACK PLUG & KIT DRIVER
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Fig.1
Insert the plug (E) into the power unit (B). By using the guides, snap the plug inside its apposite slot (use the correct
type of plug for the country in which the device must be installed).
B
E
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

EN
14
RF27549
SWITCH DIMMER 48V PMW 500Hz
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

15
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Connect the plug (C) to the power unit (B) locking it
in by rotating it 90°clockwise.
Fig.1
Fig.2
Connect the plug (P) to the push button switch (Q)
locking it by turning it 90º clockwise.
RF27549
SWITCH DIMMER 48V PMW 500Hz
Q
P
C
B
REV. 1
DATE 30/06/2021
NOCTAMBULE F F0266000

EN
16
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
REV. 1
DATE 30/06/2021
F0262030A
BIG BASE
NOCTAMBULE F F0266000

17
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
EN
Remove the base from the cylinder.
Now reconnect the New base to the cylinder.
Tighten the screws of the base.
Fig.1
Fig.2
Disconnect the dimmer and the driver from the
electrical cable.
Carefully place the lamp in a horizontal position by
resting it on the cylinder packages.
REV. 1
DATE 30/06/2021
F0262030A
BIG BASE
NOCTAMBULE F F0266000

EN
18
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos -All rights reserved -www.flos.com
Flos reserves the right to introduce any changes to its own models, without prior notice.
Fig.3
Place the lamp in vertical position.
Connect the dimmer and the driver to the electrical cable.
1x 2x 3x
100%10%
REV. 1
DATE 30/06/2021
F0262030A
BIG BASE
NOCTAMBULE F F0266000